Polaris RANGER 500 2018 Service Manual page 375

2. Remove the moveable clutch sheave
damage and wear.
e
3. Lift bearing and thrust washers
Replace as an assembly if worn, damaged, or if
problems were noted.
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
w
. Inspect for 4. Inspect surface of shaft for pitting, grooves, or
damage.
compare to specifications. Replace the drive clutch
assembly if shaft is worn or damaged.
r
off shaft.
Standard: 1.3745" - 1.375" (34.91 - 34.93 mm)
Service Limit: 1.3730" (34.87 mm)
5. Visually inspect PTFE thrust washers for damage.
Measure the thickness and compare to specification.
Replace if worn or damaged.
PVT SYSTEM
Measure the outside diameter
MEASUREMENT
Shaft Diameter:
MEASUREMENT
PTFE Washer Thickness
Standard: .030" (.76 mm)
Service Limit: .025" (.64 mm)
and
5
5.19