Polaris RANGER 500 2018 Service Manual page 395

2. Install the rear transmission mount assemblies.
Torque all fasteners to specification.
REF. DESCRIPTION
q Fastener Bolt
w Fastener Bolt
TORQUE
Rear Transmission Mount Bracket Bolts:
17 ft-lbs (23 Nm)
3. By hand, install the coupler brackets and the eight
engine to transmission coupler bolts. Do not torque
fasteners at this time.
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
4. Install the Clutch Center Distance Tool (PU-50658)
NOTES
Torque: 40 ft-lbs
(54 Nm)
Torque: 25 ft-lbs
(34 Nm)
5. In sequence, torque the eight engine coupler bracket
onto the crankshaft and transmission input shaft to
properly position the clutch center distance. The
pictures below show the tool (PU-50658) properly
installed.
fasteners to specification.
TORQUE
Engine to Trans Coupler Fasteners
In Sequence:55 ft-lb (75 Nm)
TRANSMISSION
6
6.11