Polaris RANGER 500 2018 Service Manual page 109

27. Use the water pump oil seal installation tool in kit PU-
50869 to fully install the new water pump oil seal
CAUTION
Be sure the oil seal is fully seated in cover or severe
engine damage may result.
28. Use the water pump mechanical seal installation tool
in kit PU-50869 to fully install the new water pump
d
mechanical seal until it is fully seated in the cover.
29. Install a new stator cover gasket onto the engine.
30. Align the water pump drive slot as shown below.
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING SYSTEM
31. Align the water pump drive shaft blade as shown
s
. below.
32. Apply a small amount of crankcase sealant to the
area indicated below
REF. DESCRIPTION
h Crankshaft
j Driveshaft
k Mechanical Seal
l Impeller
33. If needed, install the stator cover removal handles
tool PA-49317 to the water cover bolt holes to aid in
stator cover installation.
g
.
NOTES
3.31
3