Polaris RANGER 500 2018 Service Manual page 55

Hide thumbs Also See for RANGER 500 2018:

Table of Contents

5. Use drive clutch to rotate the crankshaft until the cam

chain sprocket timing marks are aligned with the

gasket surface as shown.

Intake cam sprocket should have "I" marks aligned with

the gasket surface and the exhaust cam sprocket

should have "E" marks aligned with the gasket surface.

6. Measure the valve clearance of each valve using a

feeler gauge. Record the measurement if clearance

is out of specification.

Intake Valve Clearance:

0.006 ± 0.002" (0.15 ± 0.05 mm)

Exhaust Valve Clearance:

0.008 ± 0.002" (0.20 ± 0.05 mm)

9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual

Chapters

Table of Contents