Polaris RANGER 500 2018 Service Manual page 61

6. Remove the upper and lower coolant lines from the
radiator.
7. Remove the recovery bottle return line.
8. Remove the two mounting screws
upper portion of the radiator to the frame.
9. Carefully lift the radiator straight up and out of the
vehicle. Take care not to damage the cooling fins.
10. Remove the four bolts that retain the fan motor and
shroud to the radiator.
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
Installation
11. Reverse previous procedures for installation.
12. Upon installation, be sure the lower radiator mounts
are placed properly in the frame support.
w
that secure the
13. After the radiator is installed, verify the rubber
mounts
14. After installation and reassembly, remove the
pressure cap and fill the radiator and recovery bottle
with coolant.
15. Refer to the cooling system bleeding procedure in
Chapter 3, under "Engine Installation Notes".
MAINTENANCE
e
have remained in place.
2
2.21