ADJUSTMENT
1. Remove the Clutch Center Distance tool from the
engine and transmission.
2. Remove the inner PVT Cover.
3. Loosen the eight engine to transmission coupler
q
bolts
.
4. Loosen the two fasteners
transmission isolator to the vehicle frame.
5. With
the
engine
and
fasteners loose, install the Clutch Center Distance
Tool as shown in the inspection process.
Clutch Center Distance Tool
PU-50658
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
6. With the tool now properly installed, in sequence
w
securing the rear
7. Torque the two rear transmission isolator fasteners
transmission
mounting
8. Remove the Clutch Center Distance tool and
torque the eight engine to transmission coupler bolts
to specification.
TORQUE
Engine To Trans Coupler Bolts:
In Sequence:55 ft-lb (75 Nm)
e
to specification
reassemble the PVT system as outlined in this
chapter.
TORQUE
Rear Trans. Isolator Bolts:
40 ft-lbs (54 Nm)
PVT SYSTEM
5
5.13