CYCLE PARTS
5.3.
STEERING BEARINGS
5.3.1.
ADJUSTING THE STEERING BEARINGS
•
Position the vehicle on the rear stand.
•
Working on either side, loosen the screw securing the
fork leg to the top yoke.
Tightening torque: 5 kgm (50 Nm).
•
Remove the nut from the steering tube.
Tightening torque: 10 kgm (100 Nm).
•
Slide out the yoke complete with handlebar from the
fork legs.
•
Adjust bearing load, using the suitable tool (no.
8163500).
Tightening torque: 10 kgm (100 Nm).
5 - 26
PEGASO 650