Espressif Systems ESP32 Technical Reference Manual page 60

4.13 Registers
31 30 29 28 27 26 25
0 0 0 0 0 0 0
RTCIO_SENSOR_SENSEn_HOLD Set to 1 to hold the output value on sensen, 0 for normal opera-
tion. (R/W)
RTCIO_SENSOR_SENSEn_MUX_SEL 1: route
digital IO_MUX. (R/W)
RTCIO_SENSOR_SENSEn_FUN_SEL Select the RTC IO_MUX function for this pad. 0: select Func-
tion 0; 1: select Function 1. (R/W)
RTCIO_SENSOR_SENSEn_SLP_SEL Sleep mode selection signal of the pad. Set to 1 to put the
pad in sleep mode. (R/W)
RTCIO_SENSOR_SENSEn_SLP_IE Input enable of the pad in sleep mode. 1: enabled; 0: disabled.
(R/W)
RTCIO_SENSOR_SENSEn_FUN_IE Input enable of the pad. 1: enabled; 0: disabled. (R/W)
Espressif Systems
Register 4.47: RTCIO_SENSOR_PADS_REG (0x001f)
24 23 22 21 20 19 18 17
0 0 0 0 0 0
16 15 14 13 12 11 10 9
0 0 0 0 0 0 0
sensen to the RTC block; 0: route
59 ESP32 Technical Reference Manual V1.0
4 IO_MUX AND GPIO MATRIX
8 7 6 5 4 7
0 0 0 0 0 0 0
sensen to the
4
0 Reset