Verifying The Shipment - ITech IT7900P Series User Manual

⚫
⚫
⚫

2.2 Verifying the Shipment

Open the package and check the articles within package box before operation.
In case of any non-conformity, missing or appearance wearing, please contact
ITECH immediately.
The package box should comprise:
Device name
Programmable
AC Power
Supply
Power Cord
to use a forklift or crane to move the cabinet.
ITECH 27U and 37U cabinets are equipped with hoisting rings as
standard on the top. It is recommended to use a crane equipped with
a four-leg hoisting belt structure for horizontal hoisting and moving,
and ensure that the four hoisting belts are the same length to avoid
cabinet skew during movement. As shown below.
After moving to the destination, please lock the four casters to se- cure
the cabinet.
The cabinet should be placed on a level ground. It is forbidden to place
the cabinet on a sloped ground.
Quantity
x1
X1
Copyright ©ITECH Electronic Co., Ltd.
Model Remarks
For the specific models included in
this series, refer to 1.1 Brief
IT7900P
Introduction.
series
Number of the power cords vary
depending on the model, See the
- Section 2.3 Connectiong the
Power Cord for power cord
connection.
Instrument Introduction
18