ITech IT7900P Series User Manual page 119

Set the Parallel Mode
1. Turn on the main switch of the AC distribution box and power on each of the
2. Set three units in parallel mode with one master and two slaves.
3. Press the composite keys [Shift]+
4. Select General menu.
5. Set the Parallel Mode, set them to one master unit and two slave units. In
⚫
⚫
⚫
6. After the parallel menu of the three units are set, restart the instrument
Revert to Single Mode
1. Set each of the three instruments to single mode.
a) Press the composite keys [Shift]+
b) Select General menu.
c)
2. Power off the three instruments and turn off the main switch of the AC
3. Remove the cables connection of the System Bus and output terminals
three units.
enter the system menu.
each group, one instrument must be the master unit and all other instruments
connected in parallel are slave units. All features are set up from the master
unit.
Single: Default value, indicates that the instrument is in single mode.
Master: Indicates that the single unit is set to master in parallel mode.
Numbers: total number of units in the parallel relationship, when the
instrument set to master, you need to set the Numbers. For example,
Numbers set to 3.
Slave: Indicates that the instrument is set to the slave in parallel mode.
separately.
After the instrument is restarted, the screen shows that the instrument is
working in parallel mode.
enter the system menu.
Set the Parallel Mode, set them to single.
distribution box.
Copyright ©ITECH Electronic Co., Ltd.
System-Related Functions
(System) on the front panel to
(System) on the front panel to
117