ITech IT7900P Series User Manual page 106

Common menu of source and load
Buzzer
Brightness
Factory-default-
settings
Power-on setup
General
Parallel mode
Touch function
Knob immediately
effective
Language
Lower
（1000ms）
Slow（500ms）
Medium
（300ms）
Fast（150ms）
Filter
Set the keyboard sound
Key
Protect
Set the screen brightness.
1-10
Select whether to reset the factory default settings or
not.
Enter
Set the power-on state.
Reset
Last
Last-OFF
Set the instruments to parallel operation mode.
Parallel
Numbers
Lock the touch screen function
Status
Knob setting will take effect immediately. If set to ON,
the Knob setting will take effect immediately. If set to
OFF, press ENTER to confirm the effect after the Knob
setting is completed.
Set the language of display
English
Chinese
Copyright ©ITECH Electronic Co., Ltd.
System-Related Functions
Lower mode, measuring every
1000ms
Slow mode, measuring every
500ms
Medium mode, measuring every
300ms
Fast mode, measuring every
150ms
Whether to turn on the filter during
measurement.
Buzzer on/off for key
Buzzer on/off for protect
Set the screen brightness level
Confirm to reset operation
When the instrument is powered
on, the instrument will initialize
some settings and [On/Off] state.
When the instrument is powered
on, the instrument will remain
the same settings and [On/Off]
state as last time
you turned off the instrument.
When the instrument is powered
on, the instrument will remain
the same settings as last time you
turned off the instrument,
but the [On/Off] is OFF state.
⚫ Master: Set the instrument to
master mode.
Single: Set the instrument to single
mode, i.e., disable the parallel
⚫ operation mode.
⚫ Slave: Set the instrument to
slave mode.
Number of parallel instruments.
Set the ON/OFF state
English
Chinese
104