2.
3.
5.5.4 Over-temperature protection (OTP)
When the temperature of the power component in the power supply exceeds
95°C, the temperature protection will be enabled. In this case, the power supply
will be automatically OFF, and the LCD will display
OT position in the status register will be set and kept until power supply is reset.
Clearing over-temperature protection:
When the power supply temperature decreases to the protection temperature,
press [Shift]+[Esc] key on the front panel (or send the command
"PROTection:CLEar"). Then
and the power supply will exit the OTP status.
5.5.5 Over-power protection (OPP)
When the output power exceeds the set power, OPP will be enabled, and
will appear on the LCD screen.
Clearing over-power protection:
In the case of over-power protection, disconnect the tested object at first. Press
[Shift]+[Esc] on the front panel (or send the command "PROTection:CLEar") to
clear
5.6 Professional Anti-islanding Test Mode
The IT7900P series provide a professional anit-islanding test mode. Users can
adjust RLC parameters or configure the parameters of active power and reactive
power to simulate islanding status between inverter and load when the main
network is off, and verify the anti-islanding protection response time of grid-tied
DUTs under different equivalent impedances, three-phase load balancing and
non-balancing conditions.
The solution helps engineers to simplify the test circuit and cost savings of
additional equipment such as oscilloscopes and power meters.
1.
Press the up/down key or rotate the knob to select Voltage limit range and
press [Enter].
Set the V+ limit and the V- limit in sequence, and press [Enter] to confirm.
on the front panel and exit the OPP mode.
Click the RLC function in Menu interface and enter to islanding simulator
function.
Copyright ©ITECH Electronic Co., Ltd.
on the power supply screen will disappear,
Source Mode Operation
. At the same time, the
47
Need help?
Do you have a question about the IT7900P Series and is the answer not in the manual?
Questions and answers