Connecting The Projector To A Media Or Content Network; Activating Snmp; Downloading Mib Information - Christie CP4315-RGB User Manual

• To enter the settings manually, select Manual and complete the IP Address and Subnet
Mask fields.
5. Select Save.
Connecting the projector to a media or content
network
Connect the projector to a media or content network to play content.
1. Using an Ethernet cable, connect the Library Media Server (LMS) network or the network-
attached storage (NAS) device to the Media port on the projector.
2. In the left navigation menu, select Service Setup > Network Settings.
3. In the Port list, select Media.
4. Enter the network settings:
• To obtain the network settings automatically, select Automatic.
• To enter the settings manually, select Manual and complete the IP Address and Subnet
Mask fields.
5. Select Save.

Activating SNMP

Activate the Simple Network Management Protocol (SNMP) to monitor the theater network for
conditions that indicate communication or hardware failures.
On Cinema 4K-RGB projectors, SNMP is enabled by default.
1. In the left navigation menu, select Service Setup > Network Settings.
2. Select the SNMP tab.
3. Select the SNMP slider.
The color of the slider changes to green to indicate it is active.
4. In the SNMP Settings area, select the SNMP version.
5. Complete the Trap Receiver IP fields.
A trap receiver captures, displays, and logs SNMP traps. Traps are event notices that are sent
immediately to the trap receiver from a network device. The SNMP device does not need to use
resources to poll for these event notices.
6. In the Blocked SNMP Traps area, select the SNMP traps you want to block.
7. Select Save.

Downloading MIB information

A Management Information Base (MIB) file contains the definitions for the device being managed by
the SNMP protocol.
1. In the left navigation menu, select Service Setup > Network Settings.
Cinema 4K-RGB User Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102712-06 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Network settings
33