Table of Contents
Advertisement
88
GETTING TO KNOW YOUR VEHICLE
6.
Clip both stowage straps to prevent the Tonneau
Cover panels from unfolding.
CAUTION!
The folded Tonneau Cover must be latched by both
front latches and both front stowage straps or damage
to the Tonneau Cover or vehicle may occur.
Stowage Strap
7.
Once in the Tri-Folded Position, pull both front clamp
handles down to the Released Position.
Released Position
8.
From the Released Position, send the clamps to the
Stowed Position by pushing from the yellow bumper
upward. Listen for a "clicking" sound to confirm the
clamp has been properly stowed.
Stowed Position
9.
Utilizing two people, remove the Tonneau Cover.
NOTE:
Be sure the Tonneau Cover has been folded completely,
and the stowage straps are engaged, before removing the
cover from the vehicle.
T
-F
T
C
RI
OLD
ONNEAU
OVER
I
NSTALLATION
To install the Tonneau Cover follow these steps:
1.
Position the folded Tonneau Cover on the truck bed
and push the cover forward against the front of the
truck bed. The Tonneau Cover centers itself when
placed on the vehicle.
NOTE:
Make sure to always push the Tonneau Cover all the way
forward on the truck bed. Failure to do so might prevent
proper clamp engagement, or interfere with the electronic
tailgate release function (if equipped).
Location Of Front Latches
Advertisement
Table of Contents
