Table of Contents
Advertisement
102
GETTING TO KNOW YOUR VEHICLE
7. Once in the Tri-Folded position, pull both
front clamp handles down to the Released
Position.
Released Position
8. From the Released Position, send the
clamps to the Stowed Position by pushing
from the yellow bumper up. Listen for a
"clicking" sound to confirm the clamp has
been properly stowed.
Stowed Position
9. With two people, remove the Tonneau
Cover.
NOTE:
Be sure the Tonneau Cover has been folded
completely before removing.
T
-F
T
C
RI
OLD
ONNEAU
OVER
I
NSTALLATION
To install the Tonneau Cover follow the following
steps:
1. Position the folded Tonneau Cover on the
truck bed and push the cover forward
against the front of the truck bed. The
Tonneau Cover centers itself when placed
on the vehicle.
NOTE:
Make sure to always push the Tonneau Cover
all the way forward on the truck bed. Failure to
do so might prevent proper clamp engagement,
or interfere with the tailgate auto drop function
(if equipped).
2. Pull down on the first set of clamp handles
to release the clamps from the stowed
position.
Hide quick links:
Advertisement
Table of Contents
