Table of Contents
Advertisement
232
MULTIMEDIA
Blind Spot Alert
Trailer Length For Blind Spot Alert
Hill Start Assist
ParkView Backup Camera Delay
ParkView Backup Camera Active Guidelines
ParkView Backup Camera Fixed Guidelines
Tire Fill Assist
Power Side Steps
Rear Seat Alert
Front ParkSense Camera Activation
Setting Name
This setting will change the type of alert provided when an object is detected in a
vehicle's blind spot. The "Off" setting will turn off Blind Spot Alert. The "Lights" setting will
activate the Blind Spot Alert lights on the outside mirrors. The "Lights & Chime" setting
will activate both the lights on the outside mirrors and an audible chime.
This setting will auto detect the length of an attached trailer. The "Auto" setting will have
the system automatically set the trailer length. The "Max" setting will always set the
length to the maximum 39.5 ft (12 m).
This setting will turn the Hill Start Assist system on or off.
This setting will add a timed delay to the ParkView Backup Camera when shifting out of
REVERSE.
This setting will turn the ParkView Backup Camera Active Guidelines on or off.
This setting will turn the ParkView Backup Camera Fixed Guidelines on or off.
This setting will turn Tire Fill Assist on or off.
This setting will raise and lower or stow the Power Side Steps. The available options are
"Automatic" to raise and lower the Power Side Steps and "Stow" to deactivate the Power
Side Steps.
When this setting is turned on and the rear doors are opened while the engine is running,
or if the engine is turned on within 10 minutes of the door opening, a message will
appear to check the rear seat when the vehicle is powered OFF.
This setting will allow you to enable or disable the front camera when an obstacle is
detected.
Description
Advertisement
Table of Contents
