Download Print this page

RAM 2500 2020 Owner's Manual

RAM 2500 2020 Owner's Manual

Hide thumbs Also See for 2500 2020:

Quick reference manual (21 pages)

,

Owner's manual (420 pages)

Table Of Contents

Table of Contents

Advertisement

Quick Links

RAM 2500/3500

20 2 0 OWNER' S M ANUAL

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the 2500 2020 and is the answer not in the manual?

Questions and answers

Summary of Contents for RAM 2500 2020

Page 1 RAM 2500/3500 20 2 0 OWNER’ S M ANUAL...
Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment that are no longer available or were not ordered on this vehicle.
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ..........................11 GETTING TO KNOW YOUR VEHICLE ..................13 GETTING TO KNOW YOUR INSTRUMENT PANEL ............106 SAFETY............................144 STARTING AND OPERATING ....................213 IN CASE OF EMERGENCY .....................346 SERVICING AND MAINTENANCE ..................385 TECHNICAL SPECIFICATIONS.....................452 MULTIMEDIA ..........................467 CUSTOMER ASSISTANCE......................548 INDEX .............................
Page 4 INTRODUCTION DOORS ..............26 To Exit Remote Start Mode And Drive The Vehicle ......... 20 Manual Door Locks ........26 HOW TO USE THIS MANUAL .......12 Remote Start Comfort Systems — Power Door Locks — If Equipped ....27 Essential Information ........12 If Equipped ...........
Page 5 INTERIOR LIGHTS ..........53 HEAD RESTRAINTS..........38 EXTERIOR LIGHTS ..........48 Front Head Restraints ......... 39 Multifunction Lever........48 Courtesy Lights ..........53 Front Head Restraint Removal ....40 Headlight Switch.......... 48 Illuminated Entry ........54 Rear Head Restraint Adjustment....40 Daytime Running Lights (DRLs) — WINDSHIELD WIPERS AND WASHERS .....55 Rear Head Restraint Removal ....
Page 6 GARAGE DOOR OPENER — IF EQUIPPED ..76 EASY-OFF TAILGATE ........... 98 PREMIUM INSTRUMENT CLUSTER — Before You Begin Programming Disconnecting The Rear Camera And DIESEL ENGINE ..........112 HomeLink® ..........76 Remote Keyless Entry ......... 98 Premium Instrument Cluster Canadian/Gate Operator Programming..79 Removing The Tailgate ........
Page 7 SAFETY STARTING AND OPERATING NORMAL OPERATION — DIESEL ENGINE ..223 Cold Weather Precautions ......223 SAFETY FEATURES ..........144 STARTING THE ENGINE — GAS ENGINE ..213 Engine Idling ..........226 Anti-Lock Brake System (ABS) ....144 Automatic Transmission......213 Noise ............227 Electronic Brake Control (EBC) System..145 Tip Start Feature ........213 Stopping The Engine .........227 AUXILIARY DRIVING SYSTEMS ......
Page 8 FUEL SAVER TECHNOLOGY — GAS ENGINE AUTOMATIC TRANSMISSION ......233 AXLE LOCKER SYSTEM — POWER WAGON Ignition Park Interlock .......234 MODELS ONLY (IF EQUIPPED)......258 (IF EQUIPPED) ............ 279 Brake/Transmission Shift Interlock STABILIZER/SWAY BAR SYSTEM — POWER SPEED CONTROL ..........280 System ............235 To Activate..........
Page 9 SNOWPLOW ............336 PARKSENSE REAR PARK ASSIST — PARKVIEW REAR BACK UP CAMERA....309 IF EQUIPPED ............296 AUX Camera — If Equipped ......311 Before Plowing........... 337 SURROUND VIEW CAMERA SYSTEM — Snowplow Prep Package Model ParkSense Sensors ........296 Availability ..........337 ParkSense Warning Display ......296 IF EQUIPPED ............312 Over The Road Operation With...
Page 10 BULB REPLACEMENT ........351 TOWING A DISABLED VEHICLE .......381 Checking Oil Level — Gas Engine .....399 Checking Oil Level — Diesel Engine..399 Replacement Bulbs ........351 Two-Wheel Drive Models......382 Adding Washer Fluid .........399 Replacing Exterior Bulbs ......353 Four-Wheel Drive Models......383 Maintenance-Free Battery .......
Page 11 Windshield Wiper Blades ......414 DEPARTMENT OF TRANSPORTATION FUEL REQUIREMENTS — GAS ENGINE.... 454 Exhaust System ........416 UNIFORM TIRE QUALITY GRADES ....446 6.4L Engine..........454 Cooling System .........417 Reformulated Gasoline ......454 Treadwear ..........446 Charge Air Cooler — Inter-Cooler ....421 Materials Added To Fuel ......454 Traction Grades .........446 Brake System ..........421 Temperature Grades .........446...
Page 12 MULTIMEDIA CUSTOMER ASSISTANCE IPOD®/USB/MP3 CONTROL — IF EQUIPPED .. 538 RADIO OPERATION AND MOBILE PHONES ...540 UCONNECT SYSTEMS ........467 SUGGESTIONS FOR OBTAINING SERVICE Regulatory And Safety Information...540 CYBERSECURITY ..........467 FOR YOUR VEHICLE .......... 548 VOICE RECOGNITION QUICK TIPS ....541 UCONNECT SETTINGS ........
Page 13: Introduction
INTRODUCTION Dear Customer, congratulations on selecting your new vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. This is a specialized utility vehicle. It can go places and perform tasks that are not intended for conventional passenger vehicles. It handles and maneuvers differently from many passenger vehicles both on-road and off-road, so take time to become familiar with your vehicle.
Page 14: How To Use This Manual
HOW TO USE THIS MANUAL VAN CONVERSIONS/CAMPERS The New Vehicle Limited Warranty does not apply to body modifications or SSENTIAL NFORMATION special equipment installed by van conversion/camper manufacturers/ Consult the Table of Contents to determine which section contains the body builders. US residents refer to the Warranty Information, Section information you desire.
Page 15: Getting To Know Your Vehicle
GETTING TO KNOW YOUR VEHICLE VEHICLE USER GUIDE — IF EQUIPPED while the vehicle is in motion, the system will Features/Benefits display the message “Feature not available Pre-installed on your Uconnect touchscreen  Access your Owner’s Information right through while the vehicle is in motion”. radio your Uconnect 4C or 4C NAV touchscreen Pre-Installed Features...
Page 16: Keys
GETTING TO KNOW YOUR VEHICLE TIP: The key fob should not be placed next to the  1 — Unlock wireless charging pad (if equipped). When viewing a topic, tap the star icon to add it 2 — LED Indicator to your Favorites, for easy access in the future.
Page 17 GETTING TO KNOW YOUR VEHICLE The turn signal lights will flash to acknowledge the NOTE: NOTE: unlock signal. The illuminated entry system will Pushing the lock button on the key fob while you The interior lights will turn off if you place the ...
Page 18 GETTING TO KNOW YOUR VEHICLE 1. Remove the emergency key by pushing 4. Remove the battery by using the emergency 6. To assemble the key fob case, line up the and holding the release button located on key to pry the battery out of its housing. top edge of the back cover with the top of the side of the key fob while pulling the the fob, and press the edges into the...
Page 19: Ignition Switch
GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH NOTE: 1. l'appareil ne doit pas produire de Once a key fob is programmed to a vehicle, it brouillage, et cannot be repurposed and reprogrammed to EYLESS UTTON GNITION 2. l'utilisateur de l'appareil doit accepter tout another vehicle.
Page 20 GETTING TO KNOW YOUR VEHICLE START/STOP ignition button, with your foot WARNING! (Continued) applied on the brake pedal, and push to operate Engine is not started.  the ignition switch. Do not leave the key fob in or near the ...
Page 21: Remote Start - If Equipped (Gasoline)
GETTING TO KNOW YOUR VEHICLE REMOTE START — IF EQUIPPED emergency key) of the key fob against the Battery at an acceptable charge level  START/STOP ignition button and push to (GASOLINE) PANIC button not pushed  operate the ignition switch. Fuel meets minimum requirement This system uses the key fob to start ...
Page 22: Remote Start Abort Message
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: EMOTE TART BORT ESSAGE To avoid unintentional shutdowns, the system If your power door locks were unlocked, The following messages will display in the  will disable for two seconds after receiving a Remote Start will automatically lock the instrument cluster display if the vehicle fails to valid Remote Start request...
Page 23: General Information
GETTING TO KNOW YOUR VEHICLE REMOTE START— IF EQUIPPED (DIESEL) NOTE: Le présent appareil est conforme aux CNR The Remote Start Comfort system can be acti- d`Innovation, Science and Economic This system uses the key fob to start vated and deactivated through the Uconnect Development applicables aux appareils radio the engine conveniently from outside exempts de licence.
Page 24: How To Use Remote Start
GETTING TO KNOW YOUR VEHICLE EMOTE TART NTER EMOTE TART WARNING! All of the following conditions must be met Push and release the Remote Start button on Do not start or run an engine in a closed  before the engine will remote start: the key fob twice, within five seconds.
Page 25: To Exit Remote Start Mode Without Driving The Vehicle
GETTING TO KNOW YOUR VEHICLE SENTRY KEY NOTE: EMOTE TART The ignition switch must be in the ON/RUN posi- ITHOUT RIVING EHICLE The Sentry Key Immobilizer system prevents tion in order to drive the vehicle. unauthorized vehicle operation by disabling the Push and release the Remote Start button one —...
Page 26: Key Programming
GETTING TO KNOW YOUR VEHICLE If the vehicle security light turns on during RSS standard(s). Operation is subject to the CAUTION! normal vehicle operation (vehicle running for following two conditions: longer than 10 seconds), it indicates that there Always remove the key fobs from the ...
Page 27: Vehicle Security Alarm (If Equipped)
GETTING TO KNOW YOUR VEHICLE La operación de este equipo está sujeta a las The vehicle security alarm will set when you use YSTEM siguientes dos condiciones: the power door locks, or use the key fob to lock Follow these steps to arm the vehicle security the doors.
Page 28: Rearming Of The System
GETTING TO KNOW YOUR VEHICLE The vehicle security alarm is designed to protect Front doors may be opened with the inside door ECURITY YSTEM ANUAL VERRIDE your vehicle. However, you can create handle without lifting the lock knob. The vehicle security alarm will not arm/disarm if conditions where the system will give you a false Doors locked before closing will remain locked you lock/unlock the doors using the manual...
Page 29: Power Door Locks - If Equipped
GETTING TO KNOW YOUR VEHICLE — I locking your key fob in the vehicle. Removing OWER OCKS QUIPPED WARNING! (Continued) the key fob or closing the door will allow the The power door lock switches are on each front locks to operate. A chime will sound if the key Never leave children alone in a vehicle, or ...
Page 30: Keyless Enter-N-Go - Passive Entry
GETTING TO KNOW YOUR VEHICLE -N-G — P The vehicle security alarm can be armed/ NOTE: EYLESS NTER ASSIVE  disarmed by pushing the Passive Entry key If “Unlock All Doors 1st Press” is programmed, NTRY QUIPPED fob lock/unlock buttons (if equipped). all doors will unlock when you grab hold of the The Passive Entry system is an enhancement to front driver’s door handle.
Page 31 GETTING TO KNOW YOUR VEHICLE with an automatic door unlock feature which NOTE: will function if the ignition switch is in the OFF After pushing the door handle lock button,  position. you must wait two seconds before you can If one of the vehicle doors is open and the door lock or unlock the doors, using either Passive panel switch is used to lock the vehicle, once all...
Page 32: Automatic Door Locks - If Equipped
GETTING TO KNOW YOUR VEHICLE General Information brouillage est susceptible d'en compro- Automatic Doors Unlock — If Equipped mettre le fonctionnement. The following regulatory statement applies to all This feature unlocks all of the doors of the Radio Frequency (RF) devices equipped in this vehicle when either front door is opened.
Page 33: Driver Memory Settings - If Equipped
GETTING TO KNOW YOUR VEHICLE door is engaged, that door can only be opened For emergency exit with the system engaged, Your vehicle is equipped with two key fobs,   by using the outside door handle even if the move the door lock switch to the unlock posi- one key fob can be linked to memory position tion, roll down the window, and open the door...
Page 34: Programming The Memory Feature
GETTING TO KNOW YOUR VEHICLE 3. Once the profile has been recalled, push ROGRAMMING EMORY EATURE INKING NLINKING EMOTE and release the set (S) button on the EYLESS NTRY EMORY To create a new memory profile, perform the memory switch. following: Your key fob can be programmed to recall one 4.
Page 35: Seats
GETTING TO KNOW YOUR VEHICLE SEATS Driver One Memory Position Recall To recall the memory settings for driver one  Seats are a part of the Occupant Restraint using the memory buttons on the door panel, System of the vehicle. push memory button (1).
Page 36: Manual Rear Seat Adjustment
GETTING TO KNOW YOUR VEHICLE Manual Front Seat Recline Adjustment Reclining Rear Seats — If Equipped WARNING! (Continued) The recline lever is located on the outboard side The recliner handle is located on the outside of To avoid injury, place your hand on the seat- ...
Page 37: Power Driver Seat Adjustment - If Equipped
GETTING TO KNOW YOUR VEHICLE — I Adjusting The Seat Forward Or Rearward OWER RIVER DJUSTMENT WARNING! The seat can be adjusted both forward and QUIPPED Adjusting a seat while driving may be  rearward. Push the seat switch forward or Some models may be equipped with an dangerous.
Page 38 GETTING TO KNOW YOUR VEHICLE Power Lumbar — If Equipped Easy Entry/Exit Seat The Easy Entry/Easy Exit feature is disabled  when the driver’s seat position is less than Vehicles equipped with power driver or This feature provides automatic driver’s seat 0.9 inches (22.7 mm) forward of the rear passenger seats may also be equipped with positioning to enhance driver mobility when...
Page 39: Heated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE — I Front Heated Seats Vehicles Equipped With Remote Start EATED EATS QUIPPED The heated seats control buttons are located on On models that are equipped with remote start, On some models, the front and rear seats may the center instrument panel below the the driver’s seat can be programmed to come be equipped with heaters located in the seat...
Page 40: Ventilated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE — I There are two heated seat switches that allow Press the ventilated seat button a third time ENTILATED EATS QUIPPED  to choose LO. the rear passengers to operate the seats Front Ventilated Seats independently.
Page 41: Front Head Restraints
GETTING TO KNOW YOUR VEHICLE base of the head restraint, and push downward To raise the head restraint, pull upward on the WARNING! on the head restraint. head restraint. To lower the head restraint, All occupants, including the driver, should push the adjustment button, located at the ...
Page 42: Front Head Restraint Removal
GETTING TO KNOW YOUR VEHICLE adjustment button located on the base of the RONT ESTRAINT EMOVAL ESTRAINT EMOVAL head restraint and push downward on the head To remove the head restraint, push the To remove the head restraint, push the restraint.
Page 43: Steering Wheel
GETTING TO KNOW YOUR VEHICLE STEERING WHEEL NOTE: WARNING! The engine must be running for the heated TEERING OLUMN Do not adjust the steering column while steering wheel to operate. driving. Adjusting the steering column while This feature allows you to tilt the steering Vehicles Equipped With Remote Start driving or driving with the steering column column upward or downward.
Page 44: Driver Adjustable Pedals - If Equipped
GETTING TO KNOW YOUR VEHICLE DRIVER ADJUSTABLE PEDALS — IF The pedals can be adjusted with the ignition WARNING! OFF. EQUIPPED Do not adjust the pedals while the vehicle is The pedals cannot be adjusted when the moving. You could lose control and have an The adjustable pedals system is designed to vehicle is in REVERSE or when the Speed accident.
Page 45: Automatic Dimming Mirror - If Equipped
GETTING TO KNOW YOUR VEHICLE Headlight glare from vehicles behind you can be This mirror automatically adjusts for headlight UTOMATIC IMMING IRROR reduced by moving the small control under the glare from vehicles behind you. — I AMERA ISPLAY mirror to the night position (toward the rear of NOTE: QUIPPED the vehicle).
Page 46: Outside Mirrors
GETTING TO KNOW YOUR VEHICLE the tailgate handle. The auto dimming feature is off through the Uconnect display. For further dimming mirror and will automatically adjust for also disabled to improve rear view viewing. information, refer to “Uconnect Settings” in headlight glare when the inside mirror adjusts.
Page 47: Power Convex Mirror Switch - If Equipped
GETTING TO KNOW YOUR VEHICLE — I The power mirror controls consist of mirror To return the control to the large mirror, push OWER ONVEX IRROR WITCH select buttons and a four-way mirror control the Power Convex Mirror Switch a second time. QUIPPED switch.
Page 48: Trailer Towing Mirrors - If Equipped
GETTING TO KNOW YOUR VEHICLE — I mirrors will then return to the original position RAILER OWING IRRORS when the vehicle is shifted out of the REVERSE QUIPPED position. Each stored memory setting will have These mirrors are designed with an adjustable an associated Tilt Side Mirrors In Reverse mirror head to provide a greater vision range position.
Page 49 GETTING TO KNOW YOUR VEHICLE If the mirror is manually folded after electrically The mirrors come out of the unfolded posi- Outside Mirrors Folding Feature  cycled, a potential extra button push is required tion. All outside mirrors are designed to be able to be to get the mirrors back to the home position.
Page 50: Illuminated Vanity Mirror - If Equipped
GETTING TO KNOW YOUR VEHICLE — I LLUMINATED ANITY IRROR EADLIGHT WITCH QUIPPED The headlight switch is located on the left side of the instrument panel. This switch controls the Illuminated vanity mirrors are located on each operation of the headlights, parking lights, sun visor.
Page 51: Daytime Running Lights (Drls) - If Equipped
GETTING TO KNOW YOUR VEHICLE Rotate the headlight switch clockwise to the first Broken, muddy, or obstructed headlights WITCH  detent for parking light and instrument panel and taillights of vehicles in the field of view Push the multifunction lever toward the will cause headlights to remain on longer light operation.
Page 52: Flash-To-Pass
GETTING TO KNOW YOUR VEHICLE LED H To Activate LASH IRECTIONAL EADLAMP YSTEM — I QUIPPED You can signal another vehicle with your 1. The Automatic High Beams are enabled headlights by lightly pulling the multifunction through the Uconnect system. Refer to This is a system consisting of LED (low/high lever toward you.
Page 53: Parking Lights And Panel Lights
GETTING TO KNOW YOUR VEHICLE headlight switch is on, and then the headlight ARKING IGHTS ANEL IGHTS switch is cycled off. Headlight delay can be To turn on the parking lights and instrument canceled by either turning the headlight switch panel lights, from the O (off) position, rotate the on then off, or by placing the ignition in the ON/ headlight switch clockwise to the first detent.
Page 54: Lane Change Assist - If Equipped
GETTING TO KNOW YOUR VEHICLE — I If equipped, and the vehicle’s speed is 0 mph HANGE SSIST QUIPPED (0 km/h), these lights can also be turned on Tap the multifunction lever up or down once, using the switch located just inside the pickup without moving beyond the detent, and the turn box, on the lower part of the bed light lens.
Page 55: Battery Saver
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: Courtesy/Reading Lights For vehicles shipped to or sold in the states of Battery saver mode is canceled if the ignition is The overhead console lights can also be California or Mississippi, the cargo, bed, and operated individually as reading lights by mirror spotter lights will not work while the pushing the corresponding buttons.
Page 56: Illuminated Entry
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: With the parking lights or headlights on, rotating On vehicles equipped with an LED overhead The Rear Courtesy/Reading Lights will remain the right dimmer control upward will increase console, if both the Dome On and Dome Defeat on until the switch is pushed a second time, so the brightness of the instrument panel lights.
Page 57: Windshield Wipers And Washers
GETTING TO KNOW YOUR VEHICLE NOTE: the lever upward to the second detent past the If the washer knob is depressed while in the If your vehicle is equipped with Illuminated intermittent settings for high-speed wiper delay range, the wiper will operate for several Approach lights under the outside mirrors, they operation.
Page 58: Rain Sensing Wipers - If Equipped
GETTING TO KNOW YOUR VEHICLE Mist Feature NOTE: The Rain Sensing system has protection This feature can be programmed on/off through features for the wiper blades and arms, and will When a single wipe to clear off road mist or the Uconnect system.
Page 59: Climate Controls
GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS ANUAL LIMATE ONTROL VERVIEW The Climate Control system allows you to regulate the temperature, air flow, and direction of air circulating throughout the vehicle. The controls are located on the touchscreen (if equipped), on the sides of the touchscreen, or on the instrument panel below the radio.
Page 60 GETTING TO KNOW YOUR VEHICLE Icon Description Recirculation Button Press and release this button on the touchscreen, or push the button on the faceplate, to change the system between Recirculation mode and outside air mode. The Recirculation indicator and the A/C indicator illuminate when the Recirculation button is pushed.
Page 61 GETTING TO KNOW YOUR VEHICLE Icon Description Mode Control Turn the Mode Control knob to adjust the airflow distribution. The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, defrost outlets and demist outlets. The Mode settings are as follows: Panel Mode Panel Mode Air comes from the outlets in the instrument panel.
Page 62 GETTING TO KNOW YOUR VEHICLE Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Mix Mode Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield.
Page 63: Automatic Climate Control Overview
GETTING TO KNOW YOUR VEHICLE UTOMATIC LIMATE ONTROL VERVIEW Uconnect 4/4C/4C NAV With 8.4–inch Display Uconnect 4C NAV With 12–inch Display Automatic Automatic Temperature Controls Temperature Controls NOTE: Icons and descriptions can vary based upon vehicle equipment. Icon Description MAX A/C Press and release the MAX A/C button on the touchscreen to change the current setting to the coldest output of air.
Page 64 GETTING TO KNOW YOUR VEHICLE Icon Description Faceplate A/C Button A/C Button Touchscreen A/C Press and release the button on the touchscreen, or push and release the button on the faceplate, to change the current Button setting. The A/C indicator illuminates when A/C is on. Recirculation Button Press and release this button to change the system between recirculation mode and outside air mode.
Page 65 GETTING TO KNOW YOUR VEHICLE Icon Description Faceplate Auto Button AUTO Set your desired temperature and press AUTO. AUTO will achieve and maintain your desired temperature by automatically adjusting the blower speed and air distribution. AUTO mode is highly recommended for efficiency. You can press and Touchscreen Auto release this button on the touchscreen, or push the button on the faceplate, to turn AUTO on.
Page 66 GETTING TO KNOW YOUR VEHICLE Icon Description Faceplate Temperature Knobs Driver and Passenger Temperature Up and Down Buttons Provides the driver and passenger with independent temperature control. Push the red button (or rotate knob if equipped) on the faceplate or touchscreen, or press and slide the temperature bar towards the red arrow button on the touchscreen for warmer temperature settings.
Page 67 GETTING TO KNOW YOUR VEHICLE Icon Description Blower Control Faceplate Blower Knob Blower Control regulates the amount of air forced through the climate system. There are seven blower speeds available. The speeds can be selected using either the blower control knob on the faceplate or the buttons on the touchscreen. Faceplate: The blower speed increases as you turn the blower control knob clockwise from the lowest blower setting.
Page 68 GETTING TO KNOW YOUR VEHICLE Icon Description Panel Mode Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction.
Page 69: Climate Control Functions
GETTING TO KNOW YOUR VEHICLE MAX A/C LIMATE ONTROL UNCTIONS UTOMATIC EMPERATURE ONTROL (ATC) MAX A/C sets the control for maximum cooling A/C (Air Conditioning) performance. Automatic Operation The Air Conditioning (A/C) button allows the Press and release to toggle between MAX A/C operator to manually activate or deactivate the 1.
Page 70: Operating Tips
GETTING TO KNOW YOUR VEHICLE NOTE: Vacation/Storage PERATING Before you store your vehicle, or keep it out of It is not necessary to move the temperature  NOTE: service (i.e., vacation) for two weeks or more, settings for cold or hot vehicles. The system Refer to the chart at the end of this section for run the air conditioning system at idle for about automatically adjusts the temperature,...
Page 71 GETTING TO KNOW YOUR VEHICLE Cabin Air Filter CONTROL CAUTION! (Continued) WEATHER The climate control system filters out dust and SETTINGS Use care when washing the inside of the  pollen from the air. Contact an authorized rear window. Do not use abrasive window Operate in dealer to service your cabin air filter, and to Cool Sunny...
Page 72: Windows
GETTING TO KNOW YOUR VEHICLE WINDOWS NOTE: To stop the window from going all the way down The Key Off Power Delay feature will allow the during the Auto-Down operation, pull up on the power windows to operate for up to 10 minutes switch briefly.
Page 73: Wind Buffeting
GETTING TO KNOW YOUR VEHICLE during auto closure. If this happens, pull the Window Lockout Switch switch lightly to the first detent and hold to close The window lockout switch on the driver's door the window manually. allows you to disable the window control on the rear passenger doors.
Page 74: Power Sunroof - If Equipped
GETTING TO KNOW YOUR VEHICLE buffeting occurs with the rear windows open, Opening Sunroof WARNING! open the front and rear windows together to Express minimize the buffeting. If the buffeting occurs Never leave children unattended in a  Push the switch rearward and release it within vehicle, or with access to an unlocked with the sunroof open, adjust the sunroof one-half second.
Page 75 GETTING TO KNOW YOUR VEHICLE called “Express Close.” During Express Close Sunshade Operation Venting Sunroof — Express operation, any other actuation of the switch will The sunshade can be opened manually. Push and release the Vent button within one stop the sunroof. However, the sunshade will open automatically half second and the sunroof will open to the as the sunroof opens.
Page 76: Hood
GETTING TO KNOW YOUR VEHICLE HOOD CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at To open the hood, two latches must be the front center of the hood to ensure that released.
Page 77: Closing
GETTING TO KNOW YOUR VEHICLE If equipped, a button on the center overhead To extend the bed step, place your foot on the console inside the vehicle can be used to protruding foot tab located on the left edge of release the tailgate.
Page 78: Garage Door Opener - If Equipped
GETTING TO KNOW YOUR VEHICLE To stow the bed step back under the tailgate, WARNING! (Continued) push the bed step forward with your foot until the bed step is retracted by the spring load. Vehicle exhaust contains carbon monoxide,  a dangerous gas.
Page 79 GETTING TO KNOW YOUR VEHICLE To erase the channels, place the ignition in the after HomeLink® has received the ON/RUN position, and push and hold the two frequency signal from the hand-held outside HomeLink® buttons (I and III) for up to transmitter.
Page 80 GETTING TO KNOW YOUR VEHICLE NOTE: Programming A Non-Rolling Code If the indicator light stays on constantly,  If the garage door opener/device does not acti- programming is complete and the garage For programming garage door openers vate, push the button a third time (for two door/device should activate when the manufactured before 1995.
Page 81: Canadian/Gate Operator Programming
GETTING TO KNOW YOUR VEHICLE seconds until HomeLink® has successfully Reprogramming A Single HomeLink® Button ANADIAN PERATOR accepted the frequency signal. The (Canadian/Gate Operator) ROGRAMMING indicator light will flash slowly and then To reprogram a channel that has been For programming transmitters in Canada/ rapidly when fully trained.
Page 82: Security
GETTING TO KNOW YOUR VEHICLE If you have any problems, or require assistance, ECURITY ENERAL NFORMATION please call toll-free 1-800-355-3515 or, on the It is advised to erase all channels before you sell The following regulatory statement applies to all Internet at HomeLink.com for information or or turn in your vehicle.
Page 83: Internal Equipment
GETTING TO KNOW YOUR VEHICLE 2. l'utilisateur de l'appareil doit accepter tout NOTE: Door Storage brouillage radioélectrique subi, même si le Not all vehicles are equipped with a door over Front Door Storage — If Equipped brouillage est susceptible d'en compro- the upper storage area.
Page 84 GETTING TO KNOW YOUR VEHICLE wall of the lower bin. Contents above the “fill Premium Center Console — If Equipped WARNING! line” may interfere with cupholder placement if The premium center console is equipped with This armrest is not a seat. Anyone seated equipped with a premium center console.
Page 85 GETTING TO KNOW YOUR VEHICLE Front Bench Seat Storage — If Equipped If your vehicle is equipped with a front bench seat, storage can be found by folding down the center seat back. A console storage area and cupholders are available. With the seatback in the upright position, lifting the seat bottom also reveals a storage location.
Page 86 GETTING TO KNOW YOUR VEHICLE Second Row In-Floor Storage Bin — If Fold Flat Load Floor — If Equipped Equipped Crew Cab models with a 60/40 rear seat may be equipped with a folding load floor. In-floor storage bins are located in front of the second row seats and can be used for extra WARNING! storage.
Page 87 GETTING TO KNOW YOUR VEHICLE 2. Unfold both the legs using the straps. Positioning The Load Floor For Storage Access 4. Reverse the procedure to put the load floor Under The Seat back in the secured down position before you operate the vehicle. 1.
Page 88: Cupholders
GETTING TO KNOW YOUR VEHICLE UPHOLDERS Front Seat Cupholders For vehicles equipped with a center console, two cupholders are located in front of the console storage bin. Front Cupholders With Bench Seat Rear Cup Wells LECTRICAL OWER UTLETS Rear Cupholders — If Equipped Some vehicles are equipped with rear The auxiliary 12 Volt (13 Amp) power outlet can cupholders located in the center armrest.
Page 89 GETTING TO KNOW YOUR VEHICLE Power Outlet Fuse Locations: CAUTION! WARNING! (Continued) F104 Fuse 20 A Yellow UCI Port/ USB Rear  Do not exceed the maximum power of Close the lid when not in use and while   Center Console 160 Watts (13 Amps) at 12 Volts.
Page 90: Power Inverter - If Equipped
This inverter can power If your vehicle is equipped with a Ram Box, a cellular phones, electronics and other low 115 Volt (400 Watts Maximum) inverter will be power devices requiring power up to 400 Watts.
Page 91: Wireless Charging Pad - If Equipped
GETTING TO KNOW YOUR VEHICLE If equipped, there may be a 115 Volt (400 Watts Due to built-in overload protection, the power Your vehicle may be equipped with a 15W 3A Qi  maximum) inverter located to the right of the inverter shuts down if the power rating is wireless charging pad located inside of the center exceeded.
Page 92: Overhead Sunglass Storage
GETTING TO KNOW YOUR VEHICLE VERHEAD UNGLASS TORAGE WARNING! At the front of the overhead console, a The pickup box is intended for load carrying  compartment is provided for the storage of one purposes only, not for passengers, who pair of sunglasses.
Page 93: Cargo Camera - If Equipped
GETTING TO KNOW YOUR VEHICLE There are stampings in the sheet metal on the A touchscreen button "X" to disable display of Activation inner side bulkheads of the box in front of and the camera image is made available when the The Dynamic Centerline feature can be behind both wheel housings.
Page 94: Rambox - If Equipped
GETTING TO KNOW YOUR VEHICLE Deactivation Turning Cargo Camera On Or Off — With There will also be a 115 Volt (400 Watt) power inverter located in the RamBox. Refer to Uconnect 4C/4C NAV The Dynamic Centerline feature will automatically “Internal Equipment”...
Page 95 GETTING TO KNOW YOUR VEHICLE Cargo bins feature two removable drain plugs CAUTION! CAUTION! (to allow water to drain from bins). To remove Failure to follow the following items could Leaving the lid open for extended periods of plug, pull up on the edge. To install, push the cause damage to the vehicle: plug downward into drain hole.
Page 96: Rambox Safety Warning
GETTING TO KNOW YOUR VEHICLE CAUTION! (Continued) WARNING! (Continued) Loads applied to the top of the bin lid In an accident, serious injury could result if   should be minimized to prevent damage to the storage bin covers are not properly the lid and latching/hinging mechanisms.
Page 97 GETTING TO KNOW YOUR VEHICLE Storage Position 2. With the side gates open, position the 4. Rotate the center handle horizontally to divider fully forward in the bed against the secure the side gates in the closed position. The storage position for the bed divider is at the front panel.
Page 98: Bed Rail Tie-Down System - If Equipped
GETTING TO KNOW YOUR VEHICLE To install the bed divider into a divider position, NOTE: perform the following: This feature is only available for vehicles equipped with a RamBox. 1. Make sure the center handle is unlocked using the vehicle key and rotate the center There are two adjustable cleats on each side of handle vertically to release the divider side the bed that can be used to assist in securing...
Page 99 GETTING TO KNOW YOUR VEHICLE Adjustable Cleat Assembly End Cap Screw Location If Equipped With End Cap Release Button If Not Equipped With Tonneau Tonneau Cover Cover 1 — Utility Rail Detent Cleat Removal (Without Tonneau Cover) 2 — Cleat Retainer Nut 3 —...
Page 100: Slide-In Campers
GETTING TO KNOW YOUR VEHICLE SLIDE-IN CAMPERS EASY-OFF TAILGATE 2. Remove the connector bracket from the sill by pushing inward in the locking tab. To simplify mounting of a camper unit with an AMPER PPLICATIONS overhang, the tailgate can be removed. Certain truck models are not recommended for NOTE: slide-in campers.
Page 101: Removing The Tailgate
GETTING TO KNOW YOUR VEHICLE 6. Tape the tailgate harness and bracket NOTE: against the forward-facing surface of the Do not carry the tailgate loose in the truck tailgate. This will prevent damaging the pickup box. connector and bracket when storing or reinstalling the tailgate.
Page 102: Tri-Fold Tonneau Cover - If Equipped
GETTING TO KNOW YOUR VEHICLE TRI-FOLD TONNEAU COVER — IF EQUIPPED 3. From the released position, send the clamps to the Stowed Position by pushing Your vehicle may be equipped with a Tri-Fold from the yellow bumper up. Listen for a Tonneau Cover which consists of different “clicking”...
Page 103 GETTING TO KNOW YOUR VEHICLE 4. Fold the rear panel up onto the center panel (intermediate position). Tri-Folded Position Correct Folding — Hold Panels Together NOTE: NOTE: When folding the center and rear panels, the Fold the panels gently. It is not recommended to Folded Rear Panel (Intermediate Position) sections MUST be held together to avoid allow the panels to drop under their own weight.
Page 104: Tri-Fold Tonneau Cover Installation
GETTING TO KNOW YOUR VEHICLE 7. Once in the Tri-Folded position, pull both ONNEAU OVER front clamp handles down to the Released NSTALLATION Position. To install the Tonneau Cover follow the following steps: 1. Position the folded Tonneau Cover on the truck bed and push the cover forward against the front of the truck bed.
Page 105 Intermediate Position (Vehicle Cannot Be Driven) 3. Push clamp wires up and under the flange NOTE: of the box (or flange of the Ram Box rail, if When folding the center and rear panels, the equipped) to the semi clamped position.
Page 106 7. Completely unfold the Tonneau Cover. Stowed Position 9. Push clamp wires up and under the flange of box (or flange of Ram Box rail, if equipped) to the semi clamped position. 10. Push clamp handles upward to the clamped position to properly engage the clamps.
Page 107: Tri-Fold Tonneau Cover Cleaning
GETTING TO KNOW YOUR VEHICLE NOTE: The Tonneau Cover clamps can be locked when ONNEAU OVER LEANING Once clamped, be sure the clamps are not in the clamped position by placing a lock For proper cleaning of the Tonneau Cover, use partially clamped to the truck bed flange.
Page 108: Getting To Know Your Instrument Panel
GETTING TO KNOW YOUR INSTRUMENT PANEL BASE / MIDLINE INSTRUMENT CLUSTER — GAS ENGINE Base / Midline Instrument Cluster — Gas Engine 2. Voltmeter charged. If the pointer moves to either IDLINE NSTRUMENT LUSTER extreme left or right and remains there —...
Page 109 GETTING TO KNOW YOUR INSTRUMENT PANEL 3. Instrument Cluster Display The fuel pump symbol points  WARNING! to the side of the vehicle where When the appropriate conditions exist,  the fuel door is located. A hot engine cooling system is dangerous. this display shows the instrument cluster You or others could be badly burned by steam display messages.
Page 110: Premium Instrument Cluster - Gas Engine
GETTING TO KNOW YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER — GAS ENGINE Premium Instrument Cluster — Gas Engine 2. Instrument Cluster Display 3. Speedometer REMIUM NSTRUMENT LUSTER — G ESCRIPTIONS NGINE When the appropriate conditions exist, Indicates vehicle speed.  ...
Page 111 GETTING TO KNOW YOUR INSTRUMENT PANEL The fuel pump symbol points  WARNING! CAUTION! to the side of the vehicle where the fuel door is located. A hot engine cooling system is dangerous. Driving with a hot engine cooling system You or others could be badly burned by steam could damage your vehicle.
Page 112: Base Instrument Cluster - Diesel Engine
GETTING TO KNOW YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER — DIESEL ENGINE Base Instrument Cluster — Diesel Engine 2. Engine Coolant Temperature Warning Light turns on while driving, NSTRUMENT LUSTER safely bring the vehicle to a stop, and — D ESCRIPTIONS IESEL NGINE...
Page 113 GETTING TO KNOW YOUR INSTRUMENT PANEL 4. Oil Pressure Gauge maintain normal vehicle operation and WARNING! emissions compliance. If something is The pointer should always indicate some  A hot engine cooling system is dangerous. wrong with the gauge, a DEF Warning oil pressure when the engine is running.
Page 114: Premium Instrument Cluster - Diesel Engine
GETTING TO KNOW YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER — DIESEL ENGINE Premium Instrument Cluster — Diesel Engine 2. Instrument Cluster Display 3. Speedometer REMIUM NSTRUMENT LUSTER — D ESCRIPTIONS IESEL NGINE When the appropriate conditions exist, Indicates vehicle speed. ...
Page 115: Instrument Cluster Display
GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY The fuel pump symbol points NOTE:  to the side of the vehicle where The DEF tank on these vehicles is designed  Your vehicle will be equipped with an the fuel filler door is located. with a large amount of full reserve.
Page 116: Instrument Cluster Display Controls
GETTING TO KNOW YOUR INSTRUMENT PANEL Trailer Tow — If Equipped NSTRUMENT LUSTER ISPLAY  ONTROLS Audio  The instrument cluster display features a driver Messages  interactive display that is located in the Screen Set Up instrument cluster.  Commercial Settings —...
Page 117: Oil Life Reset
GETTING TO KNOW YOUR INSTRUMENT PANEL Up Arrow Button 4. Push and hold the right arrow button to ESET  select “Reset”. Push and release the up arrow Your vehicle is equipped with an engine oil button to scroll upward through the 5.
Page 118: Display Menu Items
GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Temperature Push the Adaptive Cruise Control (ACC) on/off ISPLAY TEMS  button (located on the steering wheel) until one Oil Pressure Push and release the up or down arrow button  of the following displays in the instrument until the desired selectable menu icon is cluster display: Exhaust Brake —...
Page 119 GETTING TO KNOW YOUR INSTRUMENT PANEL System Off Trip A/Trip B Trailer Brake   Push and release the up or down arrow button ACC Proximity Warning Output   until the Trip menu item is highlighted in the Type ACC Unavailable Warning ...
Page 120 GETTING TO KNOW YOUR INSTRUMENT PANEL Stored Messages Favorite Menu Time  Push and release the up or down arrow button Speedometer Range To Empty   until the Messages Menu item is highlighted. Vehicle Info  Average MPG This feature shows the number of stored ...
Page 121 GETTING TO KNOW YOUR INSTRUMENT PANEL Center Range To Empty Left Side — If Equipped  None None  Average MPG   Compass Range  Current MPG   Outside Temp Average MPG  Trip A Distance   Time Menu Icon (Default Setting) ...
Page 122 GETTING TO KNOW YOUR INSTRUMENT PANEL Coolant Temperature Trailer Trip Average MPG    Oil Temperature Trailer Brake Current MPG    Transmission Temperature Oil Pressure Trip A Distance    Oil Life Coolant Temperature Trip B Distance ...
Page 123 GETTING TO KNOW YOUR INSTRUMENT PANEL Settings — If Equipped NOTE: Your vehicle may be equipped with the following Personal Settings allows the driver to set and settings. recall features when the transmission is in PARK. If equipped with a base radio (Non-Touch- ...
Page 124 GETTING TO KNOW YOUR INSTRUMENT PANEL Setting Names Abbreviated Setting Names Sub-Menus (Right Submenu Layer) (Left Submenu Layer) Headlights On with Wipers Lights w/ Wipers On; Off Automatic Highbeams Auto Highbeams On; Off Daytime Running Lights Daytime Lights On; Off Flash Lights with Lock Lights w/ Lock On;...
Page 125 GETTING TO KNOW YOUR INSTRUMENT PANEL Setting Names Abbreviated Setting Names Sub-Menus (Right Submenu Layer) (Left Submenu Layer) Aux Switches  Power Take-Off  PIN Setup  Commercial Settings Commercial NOTE: If the vehicle’s PIN is forgotten or not known, see an authorized dealer to have the PIN reset.
Page 126 GETTING TO KNOW YOUR INSTRUMENT PANEL Setting Names Abbreviated Setting Names Sub-Menus (Right Submenu Layer) (Left Submenu Layer) Trailer # (# is equal to slot position)  Boat   Cargo  Dump  Equipment  Flatbed  Trailer Name Trailer Name Gooseneck ...
Page 127: Diesel Messages And Warnings - 6.7L Cummins Diesel Engine
GETTING TO KNOW YOUR INSTRUMENT PANEL — Commercial Settings — If Equipped Your vehicle has the ability to alert you to IESEL ESSAGES ARNINGS additional maintenance required on your 6.7L C Commercial Settings allows the driver to set UMMINS IESEL NGINE vehicle or engine.
Page 128 GETTING TO KNOW YOUR INSTRUMENT PANEL remove the trapped Particulate Matter (PM). Exhaust Service Required — See Dealer Now cleaning routine. This will shortly result in a  If this occurs, the “Exhaust Filter XX% Full — This message indicates regeneration has Malfunction Indicator Light (MIL) and reduced Safely Drive at Highway Speeds to Remedy”...
Page 129 GETTING TO KNOW YOUR INSTRUMENT PANEL Engine Power Reduced Up To 2 Min (8 km/H) if the DEF system is not serviced The vehicle will only be capable of a  (Minutes) During Warmup — This message within less than 200 miles (322 km) of the fault maximum speed of 5 MPH upon the first of will display during start up when the ambient being detected.
Page 130 DEF system has not been serviced after If the vehicle is shutoff and restarted.  Your vehicle is equipped with an advanced Ram the “Service DEF System – See Dealer” Active Air system that provides enhanced If the vehicle is idled for an extended period ...
Page 131: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
Dealer”, vehicle performance may be reduced Audio and Telematics System  until service is performed by an authorized RAM These messages indicate the vehicle battery Loss of the battery charge may indicate one or dealer. has a low state of charge and continues to lose...
Page 132: Warning Lights And Messages
GETTING TO KNOW YOUR INSTRUMENT PANEL The battery was recently replaced and was After a trip:  ARNING IGHTS not charged completely. Check if any aftermarket equipment was  Seat Belt Reminder Warning Light installed (additional lights, upfitter electrical The battery was discharged by an electrical ...
Page 133 GETTING TO KNOW YOUR INSTRUMENT PANEL on, or turns on while driving, have the system The dual brake system provides a reserve Vehicles equipped with the Anti-Lock Brake inspected at an authorized dealer as soon as braking capacity in the event of a failure to a System (ABS) are also equipped with Electronic possible.
Page 134 GETTING TO KNOW YOUR INSTRUMENT PANEL Hood Open Warning Light If the light turns on while driving, safely pull over Do not operate the vehicle until the cause is and stop the vehicle. If the Air Conditioning corrected. This light does not indicate how This warning light will illuminate when (A/C) system is on, turn it off.
Page 135: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: towing. If this light turns on, stop the vehicle and ELLOW ARNING IGHTS This light may turn on if the accelerator and run the engine at idle or slightly faster, with the Adaptive Cruise Control (ACC) Fault brake pedals are pressed at the same time.
Page 136 GETTING TO KNOW YOUR INSTRUMENT PANEL automatic transmission control systems. This Electronic Stability Control (ESC) Active WARNING! warning light will illuminate when the ignition is Warning Light — If Equipped in the ON/RUN position before engine start. If A malfunctioning catalytic converter, as This warning light will indicate when the bulb does not come on when turning the referenced above, can reach higher...
Page 137 GETTING TO KNOW YOUR INSTRUMENT PANEL The ESC system will make buzzing or clicking When the LaneSense system senses the lane Low Fuel Warning Light   sounds when it is active. This is normal; the has been approached and is in a lane depar- When the fuel level reaches sounds will stop when ESC becomes inactive.
Page 138 GETTING TO KNOW YOUR INSTRUMENT PANEL Trailer Merge Assist Indicator Light — If Each tire, including the spare (if provided), even if under-inflation has not reached the level should be checked monthly when cold and to trigger illumination of the TPMS low tire Equipped inflated to the inflation pressure recommended pressure telltale.
Page 139 GETTING TO KNOW YOUR INSTRUMENT PANEL system is not functioning and service is Service 4WD Warning Light — If Equipped CAUTION! required as soon as possible. However, the This warning light will illuminate to The TPMS has been optimized for the original conventional brake system will continue to signal a fault with the 4WD system.
Page 140: Yellow Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Cargo Light — If Equipped Sway Bar Indicator Light — If Equipped ELLOW NDICATOR IGHTS This indicator light will illuminate This indicator light will illuminate Forward Collision Warning Off Indicator when the cargo light is activated by when the front sway bar is Light —...
Page 141 GETTING TO KNOW YOUR INSTRUMENT PANEL Air Suspension Bed Lowering Mode Front And Rear Axle Lock Indicator Light 4WD Low Indicator Light — If Equipped Indicator Light — If Equipped This light indicates when the front, This light alerts the driver that the rear, or both axles have been locked.
Page 142: Green Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Low Diesel Exhaust Fluid (DEF) Indicator before you drain the water from the fuel filter to Automatic Diesel Exhaust Brake Indicator prevent engine damage. Light — If Equipped Light — If Equipped The Low Diesel Exhaust Fluid (DEF) Refer to the “Draining Fuel/Water Separator This indicator light will illuminate Indicator will illuminate if the vehicle...
Page 143: White Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL to provide visual and torque warnings if an If equipped with fog lamps, the fog lamp on the Hill Descent Control (HDC) Indicator Light  unintentional lane departure occurs. side of the activated turn signal will also illumi- —...
Page 144: Blue Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL and other information to assist your service Authorized service technicians may need to NDICATOR IGHTS technician in making repairs. Although your access this information to assist with the High Beam Indicator Light vehicle will usually be drivable and not need diagnosis and service of your vehicle and towing, see an authorized dealer for service as emissions system.
Page 145: Emissions Inspection And Maintenance
GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND 1. Cycle the ignition switch to the ON position, If your OBD II system is not ready, you should but do not crank or start the engine. see an authorized dealer or repair facility. If your MAINTENANCE PROGRAMS vehicle was recently serviced or had a battery NOTE:...
Page 146: Safety
SAFETY SAFETY FEATURES You also may experience the following when WARNING! (Continued) ABS activates: (ABS) RAKE YSTEM Pumping of the Anti-Lock Brakes will  The ABS motor noise (it may continue to run  diminish their effectiveness and may lead for a short time after the stop) The Anti-Lock Brake System (ABS) provides to a collision.
Page 147: Electronic Brake Control (Ebc) System
SAFETY (EBC) ABS is designed to function with the Original receive the benefit of the system, you must LECTRONIC RAKE ONTROL Equipment Manufacturer (OEM) tires. apply continuous braking pressure during the YSTEM Modification may result in degraded ABS stopping sequence (do not “pump” the brakes). Your vehicle is equipped with an advanced Do not reduce brake pedal pressure unless performance.
Page 148 SAFETY If the “Brake System Warning Light” remains on ESC uses sensors in the vehicle to determine WARNING! or comes on while driving, it indicates that the the vehicle path intended by the driver and brake system is not functioning properly and compares it to the actual path of the vehicle.
Page 149 SAFETY ESC On NOTE: WARNING! (Continued) For vehicles with multiple partial ESC modes, a This is the normal operating mode for the ESC. momentary button push will toggle the ESC Vehicle modifications, or failure to properly  Whenever the vehicle is started, the ESC system mode.
Page 150 SAFETY Full Off — If Equipped ESC Activation/Malfunction Indicator Light WARNING! And ESC OFF Indicator Light This mode is intended for off-highway or In the ESC “Full Off” mode, the engine  off-road use only and should not be used on any The “ESC Activation/Malfunction torque reduction and stability features are public roadways.
Page 151 SAFETY to flash during acceleration, ease up on the Electronic Roll Mitigation (ERM) WARNING! accelerator and apply as little throttle as This system anticipates the potential for wheel possible. Be sure to adapt your speed and Many factors, such as vehicle loading, road lift by monitoring the driver’s steering wheel driving to the prevailing road conditions.
Page 152 SAFETY HDC Has Three States: selectable by the driver, and can be adjusted by NOTE: using the gear shift +/-. The following During HDC the +/- shifter input is used for HDC 1. Off (feature is not enabled and will not summarizes the HDC set speeds: target speed selection, but will not affect the activate)
Page 153 SAFETY Disabling HDC The cluster icon and switch lamp will flash for driver does not apply the throttle before this  several seconds then extinguish when the time expires, the system will release brake HDC will be deactivated and disabled if any of driver pushes the HDC switch but enable pressure and the vehicle will roll down the hill as the following conditions occur:...
Page 154 SAFETY If disabling HSA using Uconnect Settings, blink several times to confirm HSA is  WARNING! refer to “Uconnect Settings” in “Multimedia” disabled. There may be situations where the Hill Start for further information. 9. Repeat these steps if you want to return this Assist (HSA) will not activate and slight rolling For vehicles not equipped with an instrument feature to its previous setting.
Page 155: Auxiliary Driving Systems
SAFETY AUXILIARY DRIVING SYSTEMS Traction Control System (TCS) active automatically once an excessively swaying trailer is recognized. This system monitors the amount of wheel spin (BSM) — I LIND ONITORING of each of the driven wheels. If wheel spin is NOTE: detected, the Traction Control System (TCS) QUIPPED...
Page 156 SAFETY operate when the vehicle is in any forward gear The vehicle’s taillights, where the radar sensors If the blockage message is still present after or REVERSE and enters standby mode when the are located, must remain free of snow, ice, and cycling the ignition and driving in traffic, check vehicle is in PARK.
Page 157 SAFETY Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. Rear Monitoring Overtaking/Approaching Overtaking Traffic If you pass another vehicle slowly with a relative speed less than 15 mph (24 km/h) and the Side Monitoring vehicle remains in the blind spot for Entering From The Rear...
Page 158 SAFETY The BSM system is designed not to issue an WARNING! alert on stationary objects such as guardrails, posts, walls, foliage, berms, snow banks, car The Blind Spot Monitoring system is only an washes etc. However, occasionally the system aid to help detect objects in the blind spot may alert on such objects.
Page 159 SAFETY When RCP is on and the vehicle is in REVERSE, Blind Spot Alert Lights Only NOTE: the driver is alerted using both the visual and Whenever an audible alert is requested by the When operating in Blind Spot Alert mode, the audible alarms, including reducing the radio BSM system, the radio is also muted.
Page 160 SAFETY NOTE: maximum blind spot zone until the length has been verified. You will see “Auto” in the When a trailer with an electric brake is connected to the vehicle, the instrument cluster instrument panel cluster display will provide a menu to allow a selection Max Mode —...
Page 161 SAFETY Maximum length supported by the Trailer Merge Trailer length will be identified and placed into when there is a vehicle in the adjacent lane. The Assist feature is 39.5 ft (12 m). Trailer length is one of the following categories: driver is alerted by the illumination of the BSM considered the forward most portion of the warning light located in the outside mirror on...
Page 162: Forward Collision Warning (Fcw) With Mitigation - If Equipped
SAFETY (FCW) Le présent appareil est conforme aux CNR ORWARD OLLISION ARNING WARNING! d`Innovation, Science and Economic — I ITIGATION QUIPPED The Blind Spot Monitoring system is only an Development applicables aux appareils radio The Forward Collision Warning (FCW) system aid to help detect objects in the blind spot exempts de licence.
Page 163 SAFETY braking but has not applied sufficient brake NOTE: FCW will be disabled like ACC, with the  force, the system will compensate and provide unavailable screens. The minimum speed for FCW activation is  additional brake force as required. When towing 3 mph (5 km/h).
Page 164 SAFETY NOTE: FCW Braking Status And Sensitivity Near  The FCW sensitivity and Active Braking status When the sensitivity of FCW is set to the When the FCW is “on”, this allows the system   are programmable through the Uconnect to warn the driver of a possible collision with “Near”...
Page 165 SAFETY Service FCW Warning Le présent appareil est conforme aux CNR RESSURE ONITORING YSTEM d`Innovation, Science and Economic (TPMS) If the system turns off, and the instrument Development applicables aux appareils radio cluster displays: The Tire Pressure Monitoring System (TPMS) exempts de licence.
Page 166 SAFETY 1 mile (1.6 km) after a three hour period. The may need to be driven for up to 20 minutes CAUTION! cold tire inflation pressure must not exceed the above 15 mph (24 km/h) in order for the TPMS maximum inflation pressure molded into the to receive this information.
Page 167 SAFETY NOTE: Various Tire Pressure Monitoring System  messages, which display in the instrument The TPMS is not intended to replace normal  cluster tire care and maintenance or to provide warning of a tire failure or condition. Tire Pressure Monitoring System Warning ...
Page 168 SAFETY Should this occur, you should stop as soon as "SERVICE TPM SYSTEM" message for a A system fault may occur due to an incorrect possible and inflate the tires with a low pressure minimum of five seconds and then display TPM sensor location condition.
Page 169 (- -) in place of the pres- sensors can be purchased at an authorized condition falls below 25% of the drivers set sure value. Ram dealership. pressure or if a system malfunction occurs. The instrument cluster will display the actual tire...
Page 170 SAFETY With the sensors installed and the trailer near touchscreen will allow you to retry the or connected to your Ram truck, initiate the procedure; “Retry” will only appear when setup pairing process by entering the settings menu in fails. Each tire must be successfully paired the radio and select trailer.
Page 171 SAFETY Should this occur, you should stop as soon as Trailer Tire Pressure System Not Configured Tire Fill Alert possible and inflate the tires with a low pressure This feature notifies the user when the placard A “Trailer Tire Pressure System Not Configured” condition (those in a different color in the tire pressure is attained while inflating or message will be displayed in the Instrument...
Page 172 SAFETY If the hazard lamps do not come on while inflating Selectable Tire Fill Alert (STFA) Once the customer selects the tire pressures for the tire, the TPM sensor may be in a inoperative the front and rear axles that they want to inflate The Selectable Tire Fill Alert (STFA) system is an position, preventing the TPM sensor signal from or deflate to, they can begin inflating or...
Page 173 SAFETY Operation: NOTE: If the ignition switch is cycled, this sequence will It is particularly important for you to check the repeat, providing the system fault still exists. If The horn will chirp once when the selected  tire pressure in all of the tires on your vehicle the system fault no longer exists, the "SERVICE pressure is reached to let the user know monthly and to maintain the proper pressure.
Page 174: Occupant Restraint Systems
SAFETY General Information La operación de este equipo está sujeta a las Some of the safety features described in this siguientes dos condiciones: section may be standard equipment on some The following regulatory statement applies to all models, or may be optional equipment on Radio Frequency (RF) devices equipped in this 1.
Page 175: Seat Belt Systems
SAFETY 3. If a child from 2 to 12 years old (not in a 9. If the air bag system in this vehicle needs to Research has shown that seat belts save lives, rear-facing child restraint) must ride in the be modified to accommodate a disabled and they can reduce the seriousness of injuries front passenger seat, move the seat as far...
Page 176 SAFETY Seat Belt Reminder Light will turn on and Change Of Status Lap/Shoulder Belts remain on until both outboard front seat belts All seating positions except the Mega Cab and If the driver or outboard front seat passenger (if are buckled. The outboard front passenger seat Crew Cab front center seating position have equipped with outboard front passenger seat BeltAlert is not active when an outboard front...
Page 177 SAFETY WARNING! (Continued) WARNING! (Continued) WARNING! (Continued) It is dangerous to ride in a cargo area, Two people should never be belted into a A seat belt that is buckled into the wrong    inside or outside of a vehicle. In a collision, single seat belt.
Page 178 SAFETY 4. Position the lap belt so that it is snug and WARNING! (Continued) lies low across your hips, below your abdomen. To remove slack in the lap belt A frayed or torn seat belt could rip apart in  a collision and leave you with no protection.
Page 179 SAFETY 6. To release the seat belt, push the red button Adjustable Upper Shoulder Belt Anchorage NOTE: on the buckle. The seat belt will automat- The adjustable upper shoulder belt anchorage In the driver and outboard front passenger ically retract to its stowed position. If is equipped with an Easy Up feature.
Page 180 SAFETY First Row Center Seat Belt Operating 7. Position the lap belt so that it is snug and lies low across your hips, below your Instructions (Regular Cab Only) abdomen. To remove slack in the lap belt The first row center seat belt (Regular Cab only) portion, pull up on the shoulder belt.
Page 181 SAFETY First Row Center Lap Belt Operating WARNING! Instructions — If Equipped ONLY use a Seat Belt Extender if it is physi-  The center seating position for the Mega Cab cally required in order to properly fit the and Crew Cab front seat has a lap belt only. To original seat belt system.
Page 182 SAFETY Seat Belts And Pregnant Women Seat Belt Pretensioner Switchable Automatic Locking Retractors (ALR) — If Equipped The front outboard seat belt system is equipped with pretensioning devices that are designed to The seat belts in the passenger seating remove slack from the seat belt in the event of positions may be equipped with a Switchable a collision.
Page 183 SAFETY In Automatic Locking Mode, the shoulder belt is How To Engage The Automatic Locking Mode automatically pre-locked. The seat belt will still 1. Buckle the combination lap and shoulder retract to remove any slack in the shoulder belt. belt. Use the Automatic Locking Mode anytime a child restraint is installed in a seating position 2.
Page 184: Supplemental Restraint Systems (Srs)
SAFETY Air Bag System Components The ORC contains a backup power supply WARNING! (Continued) system that may deploy the air bag system even Occupant Restraint Controller (ORC)  if the battery loses power or it becomes Failure to replace the seat belt assembly ...
Page 185 SAFETY The Air Bag Warning Light remains on after Redundant Air Bag Warning Light instrument panel, above the glove  the four to eight-second interval. compartment. The words “SRS AIRBAG” or If a fault with the Air Bag Warning “AIRBAG” are embossed on the air bag covers. Light is detected, which could affect The Air Bag Warning Light comes on intermit- ...
Page 186 SAFETY The first stage inflator is triggered immediately The first stage inflator is triggered immediately WARNING! (Continued) during an impact that requires air bag during an impact that requires air bag deployment. A low energy output is used in less deployment.
Page 187 SAFETY Because air bag sensors measure vehicle Knee Impact Bolsters WARNING! (Continued) deceleration over time, vehicle speed and The Knee Impact Bolsters help protect the damage by themselves are not good indicators Relying on the air bags alone could lead to ...
Page 188 SAFETY The SABs may help to reduce the risk of SABICs may help reduce the risk of head and WARNING! occupant injury during certain side impacts, in other injuries to front and rear seat outboard addition to the injury reduction potential Do not use accessory seat covers or place occupants in certain side impacts, in addition to provided by the seat belts and body structure.
Page 189 SAFETY left Side Air Bags only and a right-side impact WARNING! (Continued) WARNING! (Continued) deploys the right Side Air Bags only. Vehicle damage by itself is not a good indicator of In order for the SABICs to work as intended, Seat belts (and child restraints where appro- ...
Page 190 SAFETY NOTE: Air Bag System Components If A Deployment Occurs Air bag covers may not be obvious in the interior The front air bags are designed to deflate NOTE: trim, but they will open during air bag deployment. immediately after deployment. The Occupant Restraint Controller (ORC) moni- Rollover Events tors the internal circuits and interconnecting...
Page 191 SAFETY eye irritation, rinse the area with cool water. Enhanced Accident Response System Cut off battery power to the:  For nose or throat irritation, move to fresh air. Engine In the event of an impact, if the communication  If the irritation continues, see your doctor.
Page 192 SAFETY Enhanced Accident Response System Event Data Recorder (EDR) WARNING! (Continued) Reset Procedure This vehicle is equipped with an event data It is dangerous to try to repair any part of  recorder (EDR). The main purpose of an EDR is In order to reset the Enhanced Accident the air bag system yourself.
Page 193: Child Restraints
SAFETY NOTE: Children 12 years or younger should ride Before buying any restraint system, make sure EDR data are recorded by your vehicle only if a properly buckled up in a rear seat, if available. that it has a label certifying that it meets all non-trivial crash situation occurs;...
Page 194 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and Either an Infant Carrier or a Convertible Child Infants and Toddlers who have not reached the height or weight limits Restraint, facing rearward in a rear seat of the of their child restraint...
Page 195 SAFETY Older Children And Child Restraints WARNING! WARNING! (Continued) Children who are two years old or who have Improper installation can lead to failure of Never install a rear-facing child restraint in   outgrown their rear-facing convertible child seat an infant or child restraint.
Page 196 SAFETY Children Too Large For Booster Seats 4. Is the lap part of the belt as low as possible, WARNING! touching the child’s thighs and not the Children who are large enough to wear the stomach? Never allow a child to put the shoulder belt shoulder belt comfortably, and whose legs are under an arm or behind their back.
Page 197 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight of LATCH – Lower Restraint Type the Child + Child LATCH – Lower Seat Belt + Top Seat Belt Only Anchors + Top Tether Restraint Anchors Only Tether Anchor...
Page 198 SAFETY LATCH Positions For Installing Child Restraints In This Vehicle Crew Cab 60/40 Split Bench LATCH Positions Crew Cab Full Bench LATCH Positions Top Tether Anchorage Symbol Top Tether Anchorage Symbol Lower Anchorage Symbol (2 Anchorages Per Lower Anchorage Symbol (2 Anchorages Per Regular Cab LATCH Positions Seating Position) Seating Position)
Page 199 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight of the child and the child What is the weight limit (child’s weight + weight restraint is 65 lbs (29.5 kg). Use the seat belt of the child restraint) for using the LATCH 65 lbs (29.5 kg) and tether anchor instead of the LATCH system...
Page 200 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Never “share” a LATCH anchorage with two or more child restraints. If the center position does Can two child restraints be attached using a not have dedicated LATCH lower anchorages, common lower LATCH anchorage? use the seat belt to install a child seat in the center position next to a child seat using the...
Page 201 SAFETY Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
Page 202 SAFETY some rear-facing child restraints will also be Crew Cab Split Bench Rear Seat Or Mega Cab To Install A LATCH-Compatible Child equipped with a tether strap. The tether strap Rear Seat: Center LATCH Anchorages Available Restraint will have a hook at the end to attach to the top If a child restraint installed in the center If the selected seating position has a tether anchorage and a way to tighten the strap...
Page 203 SAFETY 3. Attach the lower hooks or connectors of the How To Stow An Unused Switchable-ALR WARNING! child restraint to the lower anchorages in (ALR) Seat Belt: the selected seating position. Improper installation of a child restraint to  When using the LATCH attaching system to the LATCH anchorages can lead to failure of install a child restraint, stow all ALR seat belts 4.
Page 204 SAFETY Installing Child Restraints Using The into the retractor. Refer to the “Automatic Locking Mode” description in “Switchable Vehicle Seat Belt Automatic Locking Retractors (ALR)” under Child restraint systems are designed to be “Occupant Restraint Systems” for additional secured in vehicle seats by lap belts or the lap information on ALR.
Page 205 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Always use the tether anchor when weight + weight of the child using the seat belt to install a restraint) for using the Tether Weight limit of the Child Restraint forward facing child restraint, up to Anchor with the seat belt to attach...
Page 206 SAFETY Installing A Child Restraint With A For Regular Cab Models 6. Try to pull the webbing out of the retractor. If it is locked, you should not be able to pull Switchable Automatic Locking Retractor Place the child seat in the center of the out any webbing.
Page 207 SAFETY Installing A Child Restraint With A Cinching 2. Next, pull enough of the seat belt webbing Any seat belt system will loosen with time, so from the retractor to pass it through the belt check the belt occasionally, and pull it tight if Latch Plate (CINCH) —...
Page 208 SAFETY Installing Child Restraints Using The Top seating position. There is a plastic cover over 2. Route the tether strap to provide the most each anchorage. To attach the tether strap of direct path between the anchorage and the Tether Anchorage the child restraint: child seat.
Page 209 SAFETY Crew Cab Trucks: The top tether anchorages in this vehicle are tether strap loops located between the rear glass and the back of the rear seat. There is a tether strap loop located behind each seating position. Follow the steps below to attach the tether strap of the child restraint.
Page 210 SAFETY NOTE: restraint, through the tether strap loop If there are child seats in both of the outboard behind the seat and over to the tether strap (left and right) seating positions, the tether loop behind either the right or left outboard strap hooks of both child seats should be seat.
Page 211: Transporting Pets
SAFETY 5. Tighten the tether straps according to the RANSPORTING WARNING! (Continued) child seat manufacturer’s instructions, Air Bags deploying in the front seat could harm tightening the right and left tether straps Do not allow people to ride in any area of ...
Page 212: Safety Checks You Should Make Inside The Vehicle
SAFETY the Air Bag System has been detected. It will AFETY HECKS HOULD WARNING! (Continued) stay on until the fault is removed. If the light NSIDE EHICLE comes on intermittently or remains on while If it is necessary to sit in a parked vehicle ...
Page 213 SAFETY WARNING! WARNING! (Continued) WARNING! (Continued) An improperly attached, damaged, folded, or ONLY install floor mats designed to fit your ONLY use the passenger’s side floor mat on   stacked floor mat, or damaged floor mat vehicle. NEVER install a floor mat that the passenger’s side floor area.
Page 214: Periodic Safety Checks You Should Make Outside The Vehicle
SAFETY Lights ERIODIC AFETY HECKS HOULD WARNING! (Continued) Have someone observe the operation of brake UTSIDE EHICLE It is recommended to only use mild soap  lights and exterior lights while you work the and water to clean your floor mats. After Tires controls.
Page 215: Starting And Operating
STARTING AND OPERATING STARTING THE ENGINE — GAS ENGINE NOTE: WARNING! (Continued) This vehicle is equipped with a transmission Before starting your vehicle, adjust your seat,  Do not leave the key fob in or near the  shift interlocking system. The brake pedal adjust both inside and outside mirrors, and vehicle, or in a location accessible to chil- must be pressed to shift out of PARK.
Page 216: Keyless Enter-N-Go - Ignition
STARTING AND OPERATING -N-G — I To Turn Off The Engine Using ENGINE START/ with the vehicle speed below 5 mph (8 km/h), EYLESS NTER GNITION STOP Button the engine will shut off and the ignition will This feature allows the driver to operate the remain in the ACC position.
Page 217 STARTING AND OPERATING AutoPark — Rotary Shifter and 8-Speed If the vehicle is not in PARK and the driver exits WARNING! (Continued) the vehicle with the engine running, the vehicle Transmission Only may AutoPark. AutoPark is a supplemental feature. It is not ...
Page 218 STARTING AND OPERATING If the driver shifts into PARK while moving, the Additional customer warnings will be given The starter motor will engage automatically, run vehicle may AutoPark. when all of these conditions are met: for 10 seconds, and then disengage. Once this occurs, release the accelerator pedal and the AutoPark will engage ONLY when vehicle speed Vehicle is not in PARK...
Page 219: Cold Weather Operation (Below -22°F Or −30°C)
STARTING AND OPERATING FTER TARTING CAUTION! WARNING! (Continued) The idle speed is controlled automatically, and To prevent damage to the starter, do not Never leave children alone in a vehicle, or  it will decrease as the engine warms up. crank the engine for more than 10 seconds at with access to an unlocked vehicle.
Page 220: Keyless Enter-N-Go - Ignition
STARTING AND OPERATING Tip Start Feature 4. If you wish to stop the cranking of the 3. If the gear selector is not in PARK and the engine prior to the engine starting, remove ENGINE START/STOP button is pushed Do not press the accelerator. Cycle the ignition your foot from the brake pedal and push the once, the instrument cluster will display a switch briefly to the START position and release...
Page 221 STARTING AND OPERATING ENGINE START/STOP Button Functions — With Keyless Enter-N-Go Starting Procedure — 3. While the “Wait to Start” telltale is on, the Driver’s Foot OFF The Brake Pedal (In PARK Or instrument cluster will additionally display a Engine Manifold Air Temperature 0° F To NEUTRAL Position) gauge or bar whose initial length represents 66°...
Page 222: Extreme Cold Weather
STARTING AND OPERATING — 5. After engine start-up, check to see that XTREME EATHER ORMAL TARTING ROCEDURE there is oil pressure. NGINE ANIFOLD EMPERATURE The Cummins® Turbo Diesel engine is 66° F (19° C) 6. Release the parking brake and drive. equipped with several features designed to BOVE assist cold weather starting and operation:...
Page 223: Starting Procedure - Engine Manifold Air Temperature 0°F To 66°F (-18°C To 19°C)
STARTING AND OPERATING Follow the steps in the “Normal Starting” CAUTION! CAUTION! procedure except: Do not crank engine for more than 25 seconds Do not crank engine for more than 25 seconds 1. The “Wait To Start” telltale will remain on at a time or starter motor damage may result.
Page 224: Starting Procedure - Engine Manifold Air Temperature Below 0°F (-18°C)
STARTING AND OPERATING removed from the brake pedal prior to NOTE: 4. If the engine is cranked for more than pushing the start button again in order for the If multiple pre-heat cycles are used before 10 seconds, the post-heat cycle will turn off. ignition to move directly to off.
Page 225: Starting Fluids
STARTING AND OPERATING Engine oil pressure is above 10 psi (69 kPa) TARTING LUIDS  WARNING! (Continued) at idle. Never leave children alone in a vehicle, or WARNING!  Voltmeter operation:  with access to an unlocked vehicle. Allowing Starting fluids or flammable liquids must children to be in a vehicle unattended is The voltmeter may show a gauge fluctuation at never be used in the Cummins diesel engine...
Page 226 STARTING AND OPERATING Fuel Operating Range NOTE: Use “Ultra Low Sulfur Diesel Fuels” ONLY. Fuel Operating Range Chart *No. 1 Ultra Low Sulfur Diesel Fuel should only NOTE: Climatized Ultra Low Sulfur Diesel Fuel is a  blend of Number 2 Ultra Low Sulfur and be used where extended arctic conditions Use of Climatized Ultra Low Sulfur Diesel Fuel ...
Page 227 STARTING AND OPERATING The fuel grade should be clearly marked on Engine Oil Usage capability at low temperatures. Suitable battery  the pump at the fuel station. blankets are available from an authorized Refer to “Dealer Service” in “Servicing And Mopar dealer.
Page 228: Engine Idling
STARTING AND OPERATING NOTE: If the engine is allowed to idle or the truck is NOTE: If ambient temperatures are low and the coolant driven on low engine speed drive cycles for For instrument cluster display messages temperature is below 180°F (82°C), the engine more than 2 hours, the system will related to the vehicle's exhaust system, refer to idle speed will slowly increase to 1,000 RPM after...
Page 229: Noise
STARTING AND OPERATING DECEL switch and the idle speed will and can vary with changes in ambient will make noise even with the vehicle shut off. This decrease to approximately 1,100 RPM. temperature. Clicking sound from under the hood is normal as the DEF dosing module is purging shortly after vehicle shutdown is normal as DEF.
Page 230: Idle Shutdown
STARTING AND OPERATING HUTDOWN PERATING RECAUTIONS OOLING YSTEM This feature can be enabled so that the truck will To reduce potential for engine and transmission Avoid Overheating The Engine automatically shutdown when the truck has been overheating in high ambient temperature The temperature of the engine coolant idling for a set period of time when the engine is conditions, take the following actions:...
Page 231: Engine Block Heater - Gas Engine (If Equipped)
STARTING AND OPERATING ENGINE BLOCK HEATER — GAS ENGINE (IF ENGINE BLOCK HEATER — DIESEL ENGINE CAUTION! EQUIPPED) (IF EQUIPPED) If oil pressure falls to less than normal readings, shut the engine off immediately. The engine block heater warms the engine, and The engine block heater warms engine coolant Failure to do so could result in immediate and permits quicker starts in cold weather.
Page 232: Block Heater Usage
STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS — NOTE: The engine oil installed in the engine at the The block heater will require 110 Volts AC and factory is a high-quality energy conserving type DIESEL ENGINE 6.5 Amps to activate the heater element. lubricant.
Page 233: Parking Brake
STARTING AND OPERATING NOTE: When parking on a hill, it is important to turn the Light duty operation such as light trailer towing front wheels toward the curb on a downhill or no load operation will extend the time before grade and away from the curb on an uphill the engine is at full efficiency.
Page 234: Diesel Exhaust Brake - Engine
STARTING AND OPERATING DIESEL EXHAUST BRAKE — ENGINE WARNING! (Continued) BRAKING (IF EQUIPPED) Do not leave the key fob in or near the  vehicle, or in a location accessible to chil- The purpose of the exhaust brake (engine dren, and do not leave a vehicle equipped braking) feature is to supply negative (braking) with Keyless Enter-N-Go in the ACC or ON/ torque from the engine.
Page 235: Automatic Transmission
STARTING AND OPERATING AUTOMATIC TRANSMISSION Automatic “Smart” Exhaust Brake WARNING! Automatic “Smart” Exhaust Brake technology Do not use the exhaust brake feature when WARNING! delivers smoother, less aggressive exhaust driving in icy or slippery conditions as the braking characteristics during downhill Never use the PARK position as a substi- ...
Page 236: Ignition Park Interlock
STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) CAUTION! (Continued) It is dangerous to shift out of PARK or Never leave children alone in a vehicle, or Do not shift between PARK, REVERSE,    NEUTRAL if the engine speed is higher than with access to an unlocked vehicle.
Page 237: Brake/Transmission Shift Interlock System
STARTING AND OPERATING NOTE: select the highest available transmission gear, RAKE RANSMISSION HIFT In the event of a mismatch between the gear and will display that gear limit in the instrument NTERLOCK YSTEM selector position and the actual transmission cluster as 1, 2, 3, etc. Refer to “Electronic This vehicle is equipped with a Brake gear (for example, driver selects PARK while Range Select (ERS) Operation”...
Page 238 STARTING AND OPERATING PARK (P) WARNING! WARNING! (Continued) This range supplements the parking brake by Never use the PARK position as a substi- It is dangerous to shift out of PARK or   locking the transmission. The engine can be tute for the parking brake.
Page 239 STARTING AND OPERATING The following indicators should be used to CAUTION! WARNING! (Continued) ensure that you have properly engaged the transmission into the PARK position: Towing the vehicle, coasting, or driving for any Never leave children alone in a vehicle, or ...
Page 240 STARTING AND OPERATING conditions, using a lower gear range will In the event of a momentary problem, the NOTE: improve performance and extend transmission transmission can be reset to regain all forward Even if the transmission can be reset, we life by reducing excessive shifting and heat gears by performing the following steps: recommend that you visit an authorized dealer...
Page 241: Six-Speed Automatic Transmission
STARTING AND OPERATING gear. Once in ERS mode, tapping the GEAR – or When to Use TOW/HAUL Mode WARNING! GEAR + switch will change the top available When driving in hilly areas, towing a trailer, gear. Do not use the “TOW/HAUL” feature when carrying a heavy load, etc., and frequent driving in icy or slippery conditions.
Page 242 STARTING AND OPERATING The electronically-controlled transmission Gear Ranges precaution, turn the front wheels toward the provides a precise shift schedule. The curb on a downhill grade and away from the Do not depress the accelerator pedal when transmission electronics are self-calibrating; curb on an uphill grade.
Page 243 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) CAUTION! (Continued) It is dangerous to shift out of PARK or Never leave children alone in a vehicle, or DO NOT race the engine when shifting from    NEUTRAL if the engine speed is higher than with access to an unlocked vehicle.
Page 244 STARTING AND OPERATING NEUTRAL (N) DRIVE (D) If the transmission temperature exceeds normal operating limits, the powertrain Use this range when the vehicle is standing for This range should be used for most city and controller will modify the transmission shift prolonged periods with the engine running.
Page 245 STARTING AND OPERATING During cold temperatures, transmission Transmission Limp Home Mode 5. Restart the engine. operation may be modified depending on Transmission function is monitored electronically 6. Shift into the desired gear range. If the engine and transmission temperature as well for abnormal conditions.
Page 246 STARTING AND OPERATING available gears. Tapping the ERS (-) switch will WARNING! CAUTION! activate ERS mode, display the current gear in the instrument cluster, and set that gear as the Do not downshift for additional engine When using ERS for engine braking while top available gear.
Page 247 STARTING AND OPERATING When To Use TOW/HAUL Mode The “TOW/HAUL Indicator Light” will illuminate operation in the upper gears. When the vehicle in the instrument cluster to indicate that TOW/ speed drops or during some accelerations, the When driving in hilly areas, towing a trailer, HAUL mode has been activated.
Page 248: Auxiliary Switches - If Equipped
Two-Wheel Drive High Range (2WD)  Four-Wheel Drive High Range (4WD HIGH) For further information on using the auxiliary  switches, please refer to the Ram Body Builders Four-Wheel Drive Low Range (4WD LOW)  Guide by accessing www.rambodybuilder.com N (Neutral) and choosing the appropriate links.
Page 249 STARTING AND OPERATING For additional information on the appropriate N (Neutral) This electronically shifted transfer case is use of each transfer case mode position, see designed to be driven in the two–wheel drive N (Neutral) — This range disengages both the the information below: position (2WD) for normal street and highway front and rear driveshafts from the powertrain.
Page 250 STARTING AND OPERATING NOTE: If One Or More Of The Following Shift Conditions When operating your vehicle in 4WD LOW, the The transfer case NEUTRAL button is located in Are Not Met: engine speed is approximately three times that the center of the 4WD Control Switch and is of the 2WD or 4WD HIGH positions at a given 1.
Page 251 STARTING AND OPERATING current position indicator light will turn off, will remain on. At this time, reduce speed and Alternate Procedure the selected position indicator light will flash stop spinning the wheels to complete the shift. 1. Bring the vehicle to a complete stop. until the transfer case completes the shift.
Page 252: Electronically Shifted Transfer Case (Six Speed Transmission) - If Equipped
STARTING AND OPERATING For additional information on the appropriate NEUTRAL (N) LECTRONICALLY HIFTED RANSFER use of each transfer case mode position, see ) — I PEED RANSMISSION Neutral — This range disengages both the front the information below: and rear driveshafts from the powertrain. To be QUIPPED used for flat towing behind another vehicle.
Page 253 STARTING AND OPERATING When additional traction is required, the Transfer Case Position Indicator Lights NOTE: transfer case 4WD HIGH and 4WD LOW Before retrying a selection, make certain that all The Transfer Case Position Indicator Lights positions can be used to maximize torque to the the necessary requirements for selecting a new (4WD and 4LOW) are located in the instrument front driveshaft, forcing the front and rear...
Page 254 STARTING AND OPERATING Proper operation of four-wheel drive vehicles until the transfer case completes the shift. 2WD Or 4WD HIGH To 4WD LOW When the shift is complete, the position indi- depends on tires of equal size, type and NOTE: circumference on each wheel.
Page 255: Manually Shifted Transfer Case
STARTING AND OPERATING — Alternate Procedure N (Neutral) ANUALLY HIFTED RANSFER QUIPPED N (Neutral) — This range disengages both the 1. Bring the vehicle to a complete stop. front and rear driveshafts from the powertrain. The transfer case provides four mode positions: 2.
Page 256 STARTING AND OPERATING met. Refer to “Shifting Procedure – Manually NOTE: Two-Wheel Drive High Range (2H) Shifted Transfer Case” in this section for further Do not attempt to make a shift while only the Two-Wheel Drive High Range — This range is for information.
Page 257 STARTING AND OPERATING 2H Or 4H To 4L Shifting into or out of 4WD LOW is possible  CAUTION! with the vehicle completely stopped, however NOTE: difficulty may occur due to the mating clutch Do not use 4L (Low) range when operating When shifting into or out of 4WD LOW some gear teeth not being properly aligned.
Page 258: Air Suspension System - If Equipped
STARTING AND OPERATING AIR SUSPENSION SYSTEM — IF EQUIPPED Normal Ride Height (NRH) – This is the standard the vehicle above 5 mph (8 km/h) for Tire Jack position of the suspension and is meant for Mode, Alignment Mode, Transport Mode and normal driving.
Page 259: Instrument Cluster Display Messages
STARTING AND OPERATING in “Getting To Know Your Instrument Panel” or Wheel Alignment Mode Protection Strategy “Uconnect Settings” in “Multimedia” (if Before performing a wheel alignment this mode In order to “protect” the air suspension system, equipped with a touch screen radio) for further must be enabled.
Page 260: Operation
STARTING AND OPERATING Wheel Alignment Mode – No indicator lamps pavement due to the reduced ability to turn and PERATION  will be illuminated. Wheel Alignment Mode is speed limitations. Pushing the Alternate Trailer Height (ATH) disabled by driving the vehicle, or by dese- button once while at Normal Ride Height (NRH), lecting the mode via the interface.
Page 261 STARTING AND OPERATING To lock the rear axle, place the vehicle in 4WD To lock the front axle, push the FRONT/REAR CAUTION! (Continued) LOW, 4WD HIGH or 2WD. Refer to “Four Wheel LOCK button while traveling less than 10 mph Drive Operation”...
Page 262: Stabilizer/Sway Bar System - Power
STARTING AND OPERATING STABILIZER/SWAY BAR SYSTEM — POWER Push the SWAY BAR switch to activate the To disconnect the stabilizer/sway bar, shift to system. Push the switch again to deactivate the either 4WD HIGH or 4WD LOW and push the WAGON ONLY system.
Page 263: Safe Off-Road Driving - Power Wagon Only
STARTING AND OPERATING The National Forest Service, Bureau of Land Water Fording Characteristics WARNING! Management, or local Department of Natural Water fording characteristic is the vehicle's ability If the stabilizer/sway bar will not return to Resources are a wealth of information and to cross a body of still water, where the usually have maps with marked trails.
Page 264: Driving In Snow, Mud And Sand
STARTING AND OPERATING The Basics Of Off-Road Driving Snow – In heavy snow or for additional  CAUTION! control and traction at slower speeds, shift You will encounter many types of terrain driving Never park your vehicle over dry grass or the transmission to a low gear and shift the off-road.
Page 265: Crossing Obstacles (Rocks And Other High Points)
STARTING AND OPERATING They are normally full of debris from previous Using A Spotter CAUTION! vehicles getting stuck. As a good practice There are many times where it is hard to see the before entering any mud hole, get out and Reduced tire pressures may cause tire obstacle or determine the correct path.
Page 266: Hill Climbing
STARTING AND OPERATING Crossing A Ravine, Gully, Ditch, Washout Crossing Logs CAUTION! Or Rut To cross a log, approach it at a slight angle Winching or rocking the vehicle off hard (approximately 10 to 15 degrees). This allows When crossing a ravine, gully, ditch, washout or objects increases the risk of underbody one front tire to be on top of the log while the a large rut, the angled approach is the key to...
Page 267 STARTING AND OPERATING case into 4WD LOW and proceed with WARNING! WARNING! caution. You should use first gear and 4WD LOW for very steep hills. Never attempt to climb a hill at an angle or Do not descend a steep grade in NEUTRAL. Use turn around on a steep grade.
Page 268: Driving Through Water
STARTING AND OPERATING If You Stall Or Begin To Lose Headway – If you  RIVING HROUGH ATER CAUTION! stall or begin to lose headway while climbing Extreme care should be taken crossing any type a steep hill, allow your vehicle to come to a Water ingestion into the axles, transmission, of water.
Page 269: Airing Down For Off-Road Driving
STARTING AND OPERATING Crossing Puddles, Pools, Flooded Areas Or around your tires putting you and your vehicle IRING RIVING  Other Standing Water – Puddles, pools, in jeopardy. There is still a high risk of Running lower tire pressure off-road can improve flooded or other standing water areas personal injury and vehicle damage with your ride comfort and vehicle traction.
Page 270: Vehicle Recovery
STARTING AND OPERATING or in a situation where great care needs to be momentum, which hopefully gets you out. EHICLE ECOVERY Remember to ease off and on the accelerator taken during the recovery, then nothing can do If you drive off-road, you may encounter a the job better than a winch.
Page 271 STARTING AND OPERATING 30 feet (6 to 9 meters) between the vehicles vehicle's weight and provide a direction of WARNING! to allow for a safe recovery. If necessary join pull as straight as possible. Use block and two tow straps together using a 1.5 inch hard tackle if necessary to improve the angle of Never use tow straps with end hooks or link wood dowel.
Page 272: After Driving Off-Road
STARTING AND OPERATING LIMITED-SLIP DIFFERENTIAL them, if required, and torque to the values WARNING! specified in the Service Manual. The limited-slip differential provides additional Winch cables are under high tension when in Check for accumulations of plants or brush.  traction on snow, ice, mud, sand and gravel, use and can become a projectile if they fail.
Page 273: Winch Usage - Power Wagon Only (If Equipped)
STARTING AND OPERATING Care should be taken to avoid sudden Tensioning The Winch Rope Low Voltage Interrupt accelerations when both rear wheels are on a The winch rope must be properly tensioned Your winch is equipped with a device that will slippery surface.
Page 274: Winch Accessories
STARTING AND OPERATING 2. Remote Socket: The remote socket (which power the winch in and up to power the power; and (2) change your pulling direction will be located on the bumper assembly) winch out. The winch will stop if the switch without damaging the winch rope.
Page 275: Operating Your Winch
STARTING AND OPERATING General Information PERATING INCH WARNING! (Continued) Practice using your winch before you get stuck. Never wrap synthetic rope back onto itself. WARNING!  Some key points to remember when using your Always use a choker chain, wire choker winch are: Failure to observe any of these warnings rope or tree trunk protector on the anchor.
Page 276 STARTING AND OPERATING 1. Inspect the winch, winch mount, and CAUTION! (Continued) synthetic rope for damage. Do not use the winch if the mount is loose or rope shows Always inspect winch installation and  synthetic rope condition before operating excessive wear, frays, or damage.
Page 277 STARTING AND OPERATING in the direction the vehicle will move. This WARNING! allows the synthetic rope to wind tightly and Never touch winch rope or hook while evenly onto the spooling drum. An anchor point  someone else is at the control switch or as far away as possible will provide the winch during winching operation.
Page 278 STARTING AND OPERATING 9. Connect the remote control to the winch control box, located on the front bumper. Be careful not to let the remote control cord dangle in front of the winch. If you choose to control the winch from inside your vehicle, always pass the remote through a window to avoid pinching the cord in the door.
Page 279 STARTING AND OPERATING In certain situations you may decide to throw a heavy blanket or similar object over the rope. A heavy blanket can absorb ener- gy should the synthetic rope break. Place it on the rope midway between the winch and the anchor point.
Page 280 STARTING AND OPERATING synthetic rope tends to stack up at one end of until the winch hook is the same distance as the full length of the remote control from the winch. the drum. This stack can become large Pinch the hook between your thumb and fore- enough to cause serious damage to the finger and attach the hook strap.
Page 281: Rigging Techniques
STARTING AND OPERATING NOTE: This minimizes the synthetic rope collecting on drum, you can use a snatch block to double line Always store the remote control in a protected, one side of the drum affecting pulling efficiency out more rope. This decreases the number of clean, dry area.
Page 282: Speed Control
STARTING AND OPERATING SPEED CONTROL if multiple speed control functions are operated and the vehicle will operate at the selected at the same time. If this occurs, the Speed speed. When engaged, the Speed Control takes over Control system can be reactivated by pushing NOTE: accelerator operations at speeds greater than the Speed Control on/off button and resetting...
Page 283: To Accelerate For Passing
STARTING AND OPERATING Metric Speed (km/h) Metric Speed (km/h) WARNING! Pushing the RES (+) button once will result in Pushing the SET (-) button once will result in   Speed Control can be dangerous where the a 1 km/h increase in set speed. Each subse- a 1 km/h decrease in set speed.
Page 284: Adaptive Cruise Control (Acc)
STARTING AND OPERATING The following conditions will also deactivate the NOTE: You can change the mode by using the Cruise Speed Control without erasing the set speed Control buttons. The two control modes If the sensor does not detect a vehicle ahead ...
Page 285: Adaptive Cruise Control (Acc) Operation
STARTING AND OPERATING (ACC) DAPTIVE RUISE ONTROL WARNING! (Continued) WARNING! (Continued) PERATION Cannot take street, traffic, and weather You should switch off the ACC system:  The speed control buttons (located on the right conditions into account, and may be When driving in fog, heavy rain, heavy ...
Page 286: Activating Adaptive Cruise Control (Acc)
STARTING AND OPERATING NOTE: When the automatic transmission is in PARK, To turn the system off, push and release the  REVERSE or NEUTRAL. Any chassis/suspension or tire size modifica- Adaptive Cruise Control (ACC) on/off button tions to the vehicle will affect the performance again.
Page 287: To Set A Desired Acc Speed
STARTING AND OPERATING ACC S ESIRED PEED ANCEL When the vehicle reaches the speed desired, The following conditions cancel the system: The system will turn off and clear the set speed push the SET (-) button and release. The in memory if: The brake pedal is applied.
Page 288: To Vary The Speed Setting
STARTING AND OPERATING Metric Speed (km/h) Metric Speed (km/h) WARNING! Pushing the RES (+) button once will result in Pushing the SET (-) button once will result in   The Resume function should only be used if a 1 km/h increase in set speed. Each subse- a 1 km/h decrease in set speed.
Page 289: Setting The Following Distance In Acc
STARTING AND OPERATING The ACC system maintains set speed when  driving uphill and downhill. However, a slight speed change on moderate hills is normal. In addition, downshifting may occur while climbing uphill or descending downhill. This is normal operation and necessary to main- tain set speed.
Page 290: Overtake Aid
STARTING AND OPERATING The system automatically defaults to the The maximum braking applied by ACC is limited; NOTE: longest distance setting. To decrease the however, the driver can always apply the brakes The “BRAKE!” Screen in the instrument cluster distance setting, push the Distance Button and manually, if necessary.
Page 291: Acc Operation At Stop
STARTING AND OPERATING ACC O Adaptive Cruise Control Ready PERATION WARNING! When ACC is activated, but the vehicle speed If your ACC system brings your vehicle to a When the ACC system is resumed, the driver setting has not been selected, the display will standstill while following a vehicle ahead, your must ensure that there are no pedestrians, read “Adaptive Cruise Control Ready.”...
Page 292: Display Warnings And Maintenance
STARTING AND OPERATING NOTE: When the condition that deactivated the system ISPLAY ARNINGS If the “ACC/FCW Unavailable Wipe Front Radar is no longer present, the system will return to AINTENANCE Sensor” warning is active Normal (Fixed Speed) the “Adaptive Cruise Control Off” state and will “Wipe Front Radar Sensor In Front Of Cruise Control is still available.
Page 293: Precautions While Driving With Acc
STARTING AND OPERATING on the inside of glass. In these cases, the snow, rain, mud, or other obstruction, have the NOTE: instrument cluster display will show “ACC/FCW windshield and forward facing camera Aftermarket add-ons such as snow plows, lift  Limited Functionality Clean Front Windshield”...
Page 294 STARTING AND OPERATING Towing A Trailer Turns And Bends Using ACC On Hills ACC while towing a trailer is recommended only When driving on a curve with ACC engaged, the When driving on hills, ACC may not detect a with an Integrated Trailer Brake Controller. system may decrease the vehicle speed and vehicle in your lane.
Page 295 STARTING AND OPERATING Lane Changing Narrow Vehicles Stationary Objects And Vehicles ACC may not detect a vehicle until it is Some narrow vehicles traveling near the outer ACC does not react to stationary objects and completely in the lane in which you are edges of the lane or edging into the lane are not stationary vehicles.
Page 296: General Information
STARTING AND OPERATING La operación de este equipo está sujeta a las To change between the different control modes, ENERAL NFORMATION siguientes dos condiciones: push the Adaptive Cruise Control (ACC) on/off The following regulatory statement applies to all button which turns the ACC on and the Normal 1.
Page 297 STARTING AND OPERATING has been set a message “CRUISE CONTROL SET Metric Speed (km/h) If the button is continually pushed, the set  speed will continue to decrease in 5 mph TO MPH (km/h)” will appear indicating what Pushing the RES (+) button once will result in ...
Page 298: Parksense Rear Park Assist
STARTING AND OPERATING PARKSENSE REAR PARK ASSIST — IF The vehicle parking brake is applied.  ENSE ENSORS EQUIPPED The braking temperature exceeds normal The four ParkSense sensors, located in the rear  range (overheated). fascia/bumper, monitor the area behind the The ParkSense Rear Park Assist system vehicle that is within the sensors’...
Page 299: Parksense Display
STARTING AND OPERATING ENSE ISPLAY When the vehicle is in REVERSE, the warning display will turn on indicating the system status. The system will indicate a detected obstacle by showing a single arc in the left and/or right rear regions based on the object’s distance and location relative to the vehicle.
Page 300 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Continuous Tone WARNING ALERTS Greater than Less than...
Page 301: Enabling And Disabling Parksense
STARTING AND OPERATING Adjustable Chime Volume Settings The ParkSense switch LED will be on when If "Rear ParkSense Unavailable Wipe Sensors" ParkSense is disabled or defective. The appears in the instrument cluster display make The rear chime volume settings are ParkSense switch LED will be off when the sure the outer surface and the underside of the programmable through the Uconnect system.
Page 302 STARTING AND OPERATING When you move the gear selector into On vehicles equipped with a tailgate, Park-   WARNING! (Continued) REVERSE with ParkSense turned off, the Sense should be disabled when the tailgate instrument cluster display will show "Off" on is in the lowered or open position and the Before using ParkSense, it is strongly ...
Page 303: Parksense Front And Rear Park Assist
STARTING AND OPERATING (11 km/h) or above. A warning will appear in the 47 inches (120 cm) from the front fascia/ CAUTION! (Continued) instrument cluster display when the vehicle is in bumper in the horizontal direction, depending REVERSE, indicating the vehicle is above on the location, type and orientation of the The vehicle must be driven slowly when ...
Page 304 STARTING AND OPERATING Single 1/2 Second Tone Slow Tone For Rear Only Fast Tone Slow Tone Fast Tone For Rear Only Continuous Tone...
Page 305 STARTING AND OPERATING If an obstacle is detected in the left and/or right arc moving closer to the vehicle and the tone The vehicle is close to the obstacle when the rear region, the display will show a single arc in will change from a single 1/2 second tone to display shows one flashing arc and sounds a the left and/or right rear region and the system...
Page 306: Enabling And Disabling Front And/Or Rear Parksense
STARTING AND OPERATING WARNING ALERTS FOR FRONT Front Distance Greater than 47 inches 47-39 inches 39-25 inches 25-12 inches Less than 12 inches (inches/cm) (120 cm) (120-100 cm) (100-65 cm) (65-30 cm) (30 cm) Audible Alert Chime None None None Fast Continuous Arcs-Left...
Page 307: Service The Parksense Front/Rear
STARTING AND OPERATING requires service, the Front or Rear ParkSense If "Front/Rear ParkSense Unavailable Wipe ENSE YSTEM SAGE switch LED will blink momentarily, and then the Sensors" appears in the instrument cluster RECAUTIONS LED will be on. display make sure the outer surface and the underside of the rear fascia/bumper is clean NOTE: ERVICE...
Page 308: Lanesense - If Equipped
STARTING AND OPERATING Clean the ParkSense sensors regularly,  WARNING! CAUTION! taking care not to scratch or damage them. The sensors must not be covered with ice, Drivers must be careful when backing up ParkSense is only a parking aid and it is ...
Page 309: Turning Lanesense On Or Off
STARTING AND OPERATING applied turn signal (if the left turn signal is when the driver’s hands are not detected on the To turn the LaneSense system off, push the LaneSense button again (LED turns on). applied and the vehicle departs to the right), the steering wheel.
Page 310 STARTING AND OPERATING Left Lane Departure — Only Left Lane Detected NOTE: When the LaneSense system senses a lane  drift situation, the left lane line turns solid The LaneSense system operates with similar When the LaneSense system is on, the Lane- ...
Page 311: Changing Lanesense Status
STARTING AND OPERATING PARKVIEW REAR BACK UP CAMERA When the LaneSense system senses the lane NOTE:  has been approached and is in a lane depar- The LaneSense system operates with similar Your vehicle may be equipped with the ture situation, the left lane line flashes yellow behavior for a right lane departure.
Page 312 STARTING AND OPERATING When the vehicle is shifted out of REVERSE Cargo Camera Icons — If Equipped NOTE: For further information about how to access (with Camera delay turned on), the rear Camera Backup Camera Touchscreen Button and change the programmable features of the image will be displayed for up to 10 seconds ParkView Rear Backup Camera, refer to “Ucon- after shifting to another gear, unless the vehicle...
Page 313: Aux Camera - If Equipped
STARTING AND OPERATING AUX C — I display screen, the image will zoom in to four AMERA QUIPPED CAUTION! times the standard view. Pressing the icon a Your vehicle may be equipped with one or two To avoid vehicle damage, ParkView should second time will return the view to the standard ...
Page 314: Surround View Camera System - If Equipped
STARTING AND OPERATING SURROUND VIEW CAMERA SYSTEM — IF Deactivation When the vehicle is shifted into REVERSE, the Rear View and Top View is the default view of The AUX Camera is deactivated by pressing the EQUIPPED the system (Automatic Activation). “X”...
Page 315 STARTING AND OPERATING The following table shows the approximate The fifth button of the ParkSense Camera View Top View will show which doors are open.  distances for each zone: screen will change based on the features Open front doors will cancel the outside ...
Page 316 STARTING AND OPERATING Rear View Camera Trailer Reverse Guidance the view to the standard Backup Camera display. Pressing the Trailer Reverse Pressing the Backup Camera soft key will provide a full screen rear view with Guidance soft key will provide a full When Zoom View is selected while the vehicle is screen view of the cargo area and in REVERSE, then shifted to DRIVE, the camera...
Page 317 STARTING AND OPERATING Deactivation button, Backup Camera button, Cargo Camera Cargo Camera With Dynamic Centerline — If button or Forward Facing Camera button: Equipped The system is deactivated in the following conditions if it was activated automatically: The "X" button on the display is pressed The Dynamic Centerline feature provides an ...
Page 318 STARTING AND OPERATING Adjusting Centerline Cargo Camera Zoom View NOTE: When the Cargo Camera image is Follow the steps below to manually adjust the If the vehicle is in DRIVE, NEUTRAL, or  centerline: being displayed, and the vehicle REVERSE, and speed is greater than or equal speed is below 8 mph (13 km/h) to 8 mph (13 km/h), Zoom View is unavail- 1.
Page 319 STARTING AND OPERATING Deactivation displayed side-by-side on the touchscreen. Left The ignition is placed in the OFF position  and right camera images are swapped and The Forward Facing Camera is deactivated in The vehicle speed is over 8 mph (13 km/h) ...
Page 320: Aux Camera - If Equipped
STARTING AND OPERATING AUX C — I Deactivation AMERA QUIPPED CAUTION! (Continued) The AUX Camera is deactivated by pressing the Your vehicle may be equipped with one or two To avoid vehicle damage, the vehicle must  “X” in the upper right corner of the touchscreen. AUX Cameras, which display rearview and side be driven slowly when using Surround View This will return the display back to the...
Page 321: Engine Runaway - Diesel Engine
STARTING AND OPERATING ENGINE RUNAWAY — DIESEL ENGINE REFUELING THE VEHICLE — GAS ENGINE WARNING! (Continued) Diesel engine runaway is a rare condition The fuel filler cap (gas cap) is located behind the A fire may result if gasoline is pumped into ...
Page 322: Loose Fuel Filler Cap Message
STARTING AND OPERATING Tighten the gas cap until you hear a “clicking” Display” in “Getting To Know Your Instrument 2. Insert the fuel nozzle fully into the filler pipe  sound. This is an indication that the gas cap Panel” for further information. Tighten the fuel –...
Page 323: Diesel Exhaust Fluid
STARTING AND OPERATING injected into the exhaust upstream of a catalyst WARNING! (Continued) where, when vaporized, it converts smog-forming nitrogen oxides (NOx) into Never add fuel when the engine is running.  harmless nitrogen (N2) and water vapor (H2O), This is in violation of most state and federal fire regulations and may cause the two natural components of the air we breathe.
Page 324 STARTING AND OPERATING Temperature sensors NOTE: gauge needle can stay on a fixed position and  may not move for extended periods of time. When working with DEF, it is important to know SCR catalyst  that: This is a normal function of the system. UQS Sensor ...
Page 325 STARTING AND OPERATING 2. Insert DEF fill adapter/nozzle into DEF tank CAUTION! CAUTION! (Continued) filler neck. To avoid DEF spillage, and possible Never add anything other than DEF to the   NOTE: damage to the DEF tank from overfilling, do tank –...
Page 326: Vehicle Loading
STARTING AND OPERATING system to operate properly at temperatures AYLOAD below 12°F (-11°C). If your vehicle is not in The payload of a vehicle is defined as the This is the rim size that is appropriate for the tire operation for an extended period of time with allowable load weight a truck can carry, size listed.
Page 327: Trailer Towing
STARTING AND OPERATING TRAILER TOWING The entire vehicle should first be weighed on a Gross Trailer Weight (GTW) commercial scale to ensure that the GVWR has The GTW is the weight of the trailer plus the In this section you will find safety tips and not been exceeded.
Page 328 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Sway Control Weight-Distributing Hitch The GAWR is the maximum capacity of the front The trailer sway control can be a mechanical A weight-distributing system works by applying and rear axles. Distribute the load over the front telescoping link that can be installed between leverage through spring (load) bars.
Page 329 STARTING AND OPERATING Recommended Distribution Hitch Adjustment WARNING! Towing With 2500/3500 Air Suspension An improperly adjusted weight distributing  1. Position the truck to be ready to connect to hitch system may reduce handling, stability the trailer (do not connect the trailer). and braking performance and could result in a collision.
Page 330 STARTING AND OPERATING 5. Install and adjust the tension in the weight Towing With All Other 2500/3500 (Non-Air Measurement Example 2500/ distributing bars per the manufacturers’ Suspension) Example 3500 Height (mm) recommendations so that the height of the 1. Position the truck to be ready to connect to 1030 front fender is approximately (H2-H1)/ the trailer (do not connect the trailer).
Page 331: Trailer Hitch Type And Maximum Trailer Weight
STARTING AND OPERATING RAILER ITCH YPE AND AXIMUM RAILER EIGHT The following chart provides the maximum trailer weight a given factory equipped trailer hitch type can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Type and Maximum Trailer Weight Hitch Type Max.
Page 332: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING Consider the following items when computing RAILER OWING EIGHTS AXIMUM CAUTION! the weight on the rear axle of the vehicle: RAILER EIGHT ATINGS Do not tow a trailer at all during the first  The tongue weight of the trailer. ...
Page 333 STARTING AND OPERATING Check for signs of tire wear or visible tire  WARNING! (Continued) WARNING! (Continued) damage before towing a trailer. Refer to “Tires” in “Servicing And Maintenance” for When hauling cargo or towing a trailer, do Total weight must be distributed between ...
Page 334 STARTING AND OPERATING Integrated Trailer Brake Module — If The user interface consists of the following: WARNING! Equipped Manual Brake Control Lever Do not connect trailer brakes to your  Your vehicle may have an Integrated Trailer Slide the manual brake control lever to the left vehicle's hydraulic brake lines.
Page 335 STARTING AND OPERATING If a fault is detected in the trailer wiring or the 1. Make sure the trailer brakes are in good 6. Push the UP or DOWN buttons until the Integrated Trailer Brake Module (ITBM), the working condition, functioning normally Trailer Brake Type appears on the screen.
Page 336 STARTING AND OPERATING Light Electric Heavy Electric Light EOH Heavy EOH Electric over Hydraulic Electric over Hydraulic Type of Trailer Brakes Electric Trailer Brakes Electric Trailer Brakes Trailer Brakes Trailer Brakes Load *Under 10,000 lbs *Above 10,000 lbs *Under 10,000 lbs *Above 10,000 lbs * The suggested selection depends and may NOTE:...
Page 337 STARTING AND OPERATING The Trailer Tow Package may include a four- and seven-pin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicle’s wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector.
Page 338: Towing Tips
STARTING AND OPERATING Tow/Haul Mode City Driving OWING To reduce potential for automatic transmission In city traffic — while stopped, place the trans-  Before setting out on a trip, practice turning, overheating, activate TOW/HAUL mode when mission in NEUTRAL, but do not increase stopping, and backing up the trailer in an area driving in hilly areas, or select a lower gear engine idle speed.
Page 339: Snowplow
STARTING AND OPERATING SNOWPLOW NOWPLOW ACKAGE ODEL CAUTION! VAILABILITY Snowplow Prep Packages are available as a The “Lamp Out” indicator could illuminate if factory installed option. These packages For Information about snowplow applications exterior lamps are not properly installed. include components necessary to equip your visit www.ramtrucks.com or refer to the current vehicle with a snowplow.
Page 340: Over The Road Operation With Snowplow Attached
STARTING AND OPERATING NOTE: PERATION ENERAL AINTENANCE Detach the snowplow when transporting NOWPLOW TTACHED Snowplows should be maintained in passengers. accordance with the plow manufacturer's The blade restricts air flow to the radiator and Vehicle front end wheel alignment was set to instructions.
Page 341: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) OWING EHICLE EHIND NOTHER EHICLE Wheels OFF The Two-Wheel Drive Towing Condition Four-Wheel Drive Models Ground Models See Instructions Automatic transmission in PARK  Flat Tow NONE NOT ALLOWED Transfer case in NEUTRAL (N) ...
Page 342: Recreational Towing Four -Wheel Drive Models
STARTING AND OPERATING — 2. Drive the rear wheels onto the tow dolly. ECREATIONAL OWING CAUTION! (Continued) HEEL RIVE ODELS 3. Firmly apply the parking brake. Place Before recreational towing, the transfer  automatic transmission in PARK. case must be in NEUTRAL. To be certain the NOTE: transfer case is fully in NEUTRAL, perform Both the manual shift and electronic shift...
Page 343 STARTING AND OPERATING Shifting Into (N) NEUTRAL NOTE: 7. Release the brake pedal for five seconds If vehicle is equipped with air suspension, and ensure that there is no vehicle Use the following procedure to prepare your ensure the vehicle is set to Normal Ride Height. movement.
Page 344 STARTING AND OPERATING NOTE: This process allows the air suspension to With electronic shift transfer case with  adjust the vehicle’s ride height to compen- With electronic shift transfer case: push-button selector switch, push and sate for temperature effects. hold the switch for the desired transfer Steps 2 through 3 are requirements that ...
Page 345: Driving Tips
STARTING AND OPERATING DRIVING TIPS 11. Shift the transmission into gear, release the Flowing/Rising Water brake pedal, and check that the vehicle WARNING! operates normally. RIVING LIPPERY URFACES Do not drive on or across a road or path Acceleration NOTE: where water is flowing and/or rising (as in With electronic shift transfer case: Rapid acceleration on snow covered, wet, or...
Page 346: Off-Road Driving Tips
STARTING AND OPERATING RIVING WARNING! (Continued) CAUTION! (Continued) Care should be taken when attempting to climb Driving through standing water limits your Do not exceed 5 mph (8 km/h) when   steep hills or driving diagonally across a hill or vehicle’s braking capabilities, which driving through standing water.
Page 347 STARTING AND OPERATING After Driving Off-Road Check threaded fasteners for looseness,  WARNING! particularly on the chassis, drivetrain compo- Off-road operation puts more stress on your nents, steering, and suspension. Retighten Abrasive material in any part of the brakes vehicle than does most on-road driving. After them, if required, and torque to the values may cause excessive wear or unpredictable going off-road, it is always a good idea to check...
Page 348: In Case Of Emergency
IN CASE OF EMERGENCY HAZARD WARNING FLASHERS ASSIST AND SOS SYSTEM — IF EQUIPPED Push the switch to turn on the Hazard Warning Flashers. When the switch is activated, all directional turn signals will flash on and off to NOTE: warn oncoming traffic of an emergency.
Page 349 IN CASE OF EMERGENCY NOTE: SiriusXM Guardian™ Customer Care –  In-vehicle support for SiriusXM Guardian™. Your vehicle may be transmitting data as  authorized by the subscriber. Vehicle Customer Care – Total support for all  other vehicle issues. The SOS and ASSIST buttons will only func- ...
Page 350 IN CASE OF EMERGENCY 3. Once a connection between the vehicle and NOTE: WARNING! a SOS operator is made, the SOS Call Your vehicle may be transmitting data as  system may transmit the following If anyone in the vehicle could be in danger ...
Page 351 IN CASE OF EMERGENCY SOS or other emergency line operators in WARNING! (Continued) WARNING! (Continued) Mexico may not answer or respond to SOS system calls. The SOS Call system is embedded into the The Occupant Restraint Control module   vehicle’s electrical system.
Page 352: General Information
IN CASE OF EMERGENCY LTE (voice/data) or 4G (data) network and/or Never place anything on or near the vehicle’s Le présent appareil est conforme aux CNR   Global Positioning Satellite signals are LTE (voice/data) or 4G (data) and GPS d`Innovation, Science and Economic unavailable or obstructed.
Page 353: Bulb Replacement
IN CASE OF EMERGENCY BULB REPLACEMENT EPLACEMENT ULBS All of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. Interior Bulbs Bulb Name Bulb Number Overhead Console Lamps TS 212–9 Dome Lamp 7679 For lighted switches, see an authorized dealer for replacement instructions. Exterior Bulbs Bulb Name Bulb Number...
Page 354 IN CASE OF EMERGENCY Exterior Bulbs Bulb Name Bulb Number Front Side Marker (Halogen Reflector Headlamp) Front Side Marker (LED Headlamps) LED (Serviced At An Authorized Dealer) Front Fog Lamps (Halogen Reflector Headlamp) H11LL Front Fog Lamps (LED Headlamps) LED (Serviced At An Authorized Dealer) Side Indicators (Front And Side View Mirror) LED (Serviced At An Authorized Dealer) Base Rear Tail/Turn and Stop Lamp...
Page 355: Replacing Exterior Bulbs
IN CASE OF EMERGENCY 4. Reach through the access hole of the wheel 6. Rotate the bulb counterclockwise a quarter EPLACING XTERIOR ULBS house splash shield and disengage the bulb turn to unlock the bulb from the lamp. Base Quad: Low Beam Headlamp, High access cover by rotating counterclockwise.
Page 356 IN CASE OF EMERGENCY 4. Reach behind the headlamp and disengage Front Park And Turn 7. Reverse the procedure for installation of the access cover by rotating counter- new bulb and covers. 1. Open the hood. clockwise. Side Marker Lamp 2.
Page 357 IN CASE OF EMERGENCY 4. Reach through the access hole of the wheel Halogen CAUTION! house splash shield and disengage the side 1. Reach under and behind the front bumper marker socket by rotating counterclockwise Do not contaminate the bulb glass by to access the back of the front fog lamp a quarter turn.
Page 358 IN CASE OF EMERGENCY 2. Pull the outboard side of the lamp rearward 6. Reverse the procedure to install the bulb 4. Pull the desired bulb straight from the far enough to unsnap the two receptacles and housing. socket. on the outboard side of the lamp housing Center High Mounted Stop Lamp (CHMSL) from the two plastic snap post retainers in the outer box side panel.
Page 359 IN CASE OF EMERGENCY Cab Top Clearance Lamps — If Equipped 3. Pull the bulb straight from it's socket and Side Marker Lamps (Dual Rear Wheels) — replace. If Equipped 1. Remove the screws from the top of the lamp. Rear Lamp Bar ID Marker (Dual Rear Wheels) —...
Page 360: Fuses
IN CASE OF EMERGENCY FUSES each fuse and component may be stamped on WARNING! (Continued) the inside cover, otherwise the cavity number of each fuse is stamped on the inside cover that If the replaced fuse blows again, contact an WARNING! ...
Page 361 IN CASE OF EMERGENCY Cavity Cartridge Fuse Micro Fuse Description 40 Amp Green – Steering Torque Overlay Module (STOM) 40 Amp Green – Starter Solenoid 20 Amp Blue – NOX Sensor – If Equipped 40 Amp Green – Diesel / Fuel Heater – If Equipped 30 Amp Pink –...
Page 362 IN CASE OF EMERGENCY Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink – Front Wiper — – Spare — – Spare 20 Amp Blue – Trailer Tow Backup Lights – If Equipped 20 Amp Blue – Trailer Tow Parking Lights – If Equipped Trailer Tow Receptacle / Trailer Tow (Separate E-Brake) / 30 Amp Pink –...
Page 363 IN CASE OF EMERGENCY Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Upfitters Relay Coil – If Equipped – – Spare – – Spare – 10 Amp Red IP Cluster / CSG – 20 Amp Yellow Air Suspension Control Module – If Equipped Ignition Node Module / Keyless Ignition Node Module, –...
Page 364 IN CASE OF EMERGENCY Cavity Cartridge Fuse Micro Fuse Description Fuel Injectors / Powertrain Control Module / SRV – If – 25 Amp Clear Equipped MOD Inverter (Wake Up) / Power Port / USB IP / WCPM – – 10 Amp Red If Equipped –...
Page 365 IN CASE OF EMERGENCY Cavity Cartridge Fuse Micro Fuse Description – 20 Amp Yellow Trailer Tow Right Turn / Stop Lights - If Equipped – 10 Amp Red Steering Column Control Module / Cruise Control – – Spare – 15 Amp Blue ASBM / HVAC / ICS / Rear Heated Seat Switches –...
Page 366 IN CASE OF EMERGENCY Cavity Cartridge Fuse Micro Fuse Description F100 – 10 Amp Red Upfitters Box Feed– If Equipped F101 – 20 Amp Yellow Rear Heated Seat Right — If Equipped F102 – 20 Amp Yellow Rear Heated Seat Left / Run RLY #3 Coil — If Equipped F103 –...
Page 367: Jacking And Tire Changing
IN CASE OF EMERGENCY JACKING AND TIRE CHANGING NOTE: If your vehicle is equipped with an air suspen- sion system, there is a feature which allows the WARNING! automatic leveling to be disabled to assist with Do not attempt to change a tire on the side ...
Page 368 IN CASE OF EMERGENCY Remove the jack and tools from the bracket There are two ways to assemble the tools: CAUTION! (Continued) assembly. Turn the jack turn-screw Assembled For Spare Tire Lowering/Raising counterclockwise to release jack from bracket Damage to the lug wrench, extensions and ...
Page 369: Removing The Spare Tire
IN CASE OF EMERGENCY 4. Lift the spare tire with one hand to give WARNING! clearance to tilt the retainer at the end of the cable. After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid acceleration or sharp turns.
Page 370: Preparations For Jacking
IN CASE OF EMERGENCY NOTE: WARNING! (Continued) The winch mechanism is designed for use with the extension tubes only. Use of an air wrench Block the wheel diagonally opposite the  or other power tools is not recommended and wheel to be raised. can damage the winch.
Page 371 IN CASE OF EMERGENCY CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare wheel, jack, and tools from storage. 2. Using the lug wrench, loosen, but do not Jack Warning Label Lug Wrench Adapter remove, the wheel nuts by turning them...
Page 372 IN CASE OF EMERGENCY Rear Jacking Location When changing a rear wheel, assemble the jack driver to the jack and connect the jack driver to the extension tubes. Place the jack under the axle between the spring and the shock absorber with the extension tubes ex- tending to the rear.
Page 373 IN CASE OF EMERGENCY 4. By rotating the lug wrench clockwise, raise the vehicle until the wheel just clears the surface. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
Page 374: To Stow The Flat Or Spare
IN CASE OF EMERGENCY 6. Finish tightening the lug nuts. Push down on 8. Lower the jack to its fully closed position. NOTE: the lug wrench while at the end of the Stow the replaced tire, jack, and tools as Have the flat tire repaired or replaced immedi- handle for increased leverage.
Page 375: Reinstalling The Jack And Tools
IN CASE OF EMERGENCY 4. Rotate the lug wrench handle clockwise until the wheel is drawn into place against the underside of the vehicle. Continue to rotate until you feel the winch mechanism slip, or click three or four times. It cannot be overtightened.
Page 376: Hub Caps/Wheel Covers - If Equipped
IN CASE OF EMERGENCY NOTE: On 3500 models with Dual Rear Wheels (DRW), CAUTION! Ensure that the jack and tool bracket assembly you must first remove the hub caps—use the slides into the front hold down location. Use extreme caution when removing the front procedure noted for the single rear wheel.
Page 377: Jump Starting
IN CASE OF EMERGENCY The positive battery post may be covered with  CAUTION! CAUTION! (Continued) a protective cap if equipped. Lift up on the cap to gain access to the positive battery Do not use a portable battery booster pack or The rear hub caps on the dual rear wheel ...
Page 378: Jump Starting Procedure
IN CASE OF EMERGENCY 1. Connect the positive (+) end of the jumper TARTING ROCEDURE WARNING! (Continued) cable to the positive (+) post of the discharged vehicle. Remove any metal jewelry such as rings, WARNING!  watch bands and bracelets that could NOTE: Failure to follow this jump starting procedure make an inadvertent electrical contact.
Page 379: Gear Selector Override - 6-Speed
IN CASE OF EMERGENCY 5. Start the engine in the vehicle that has the If frequent jump starting is required to start your 5. Insert a screwdriver or similar tool into the access port (ringed circle) on the bottom of booster battery, let the engine idle a few vehicle you should have the battery and charging the steering column, and push and hold the...
Page 380: Manual Park Release - 8 - Speed
IN CASE OF EMERGENCY MANUAL PARK RELEASE — 8 – SPEED Follow these steps to activate the Manual Park Release: TRANSMISSION 1. Firmly apply the parking brake. WARNING! 2. Using a small screwdriver or similar tool, remove the Manual Park Release access Always secure your vehicle by fully applying cover, which is just above the parking brake the parking brake before activating the...
Page 381: If Your Engine Overheats
IN CASE OF EMERGENCY IF YOUR ENGINE OVERHEATS 4. Using the screwdriver or similar tool, push To Reset The Manual Park Release: the Manual Park Release lever locking tab 1. Push the locking tab to the right, to unlock In any of the following situations, you can (just below the middle of the lever) to the the lever.
Page 382: Freeing A Stuck Vehicle
IN CASE OF EMERGENCY FREEING A STUCK VEHICLE Push the “ESC OFF” switch, to place the Elec-  WARNING! tronic Stability Control (ESC) system in If your vehicle becomes stuck in mud, sand, or You or others can be badly burned by hot “Partial Off”...
Page 383: Towing A Disabled Vehicle
IN CASE OF EMERGENCY NOTE: CAUTION! CAUTION! (Continued) Vehicles equipped with the Air Suspension Racing the engine or spinning the wheels System must be placed in Transport mode, Revving the engine or spinning the wheels   may lead to transmission overheating and too fast may lead to transmission over- before tying them down (from the body) on a failure.
Page 384: Two-Wheel Drive Models
IN CASE OF EMERGENCY Wheels OFF The Towing Condition 2WD Models 4WD Models Ground If transmission is operable: See instructions in “Recreational Towing” under “Starting And Operating” • Transmission in NEUTRAL Automatic Transmission in PARK • 30 mph (48 km/h) max speed ...
Page 385: Four-Wheel Drive Models
IN CASE OF EMERGENCY NOTE: CAUTION! CAUTION! Refer to “Manual Park Release” in this section for instructions on shifting the transmission to Towing this vehicle in violation of the above Front or rear wheel lifts must not be used (if ...
Page 386: Emergency Tow Hooks - If Equipped
IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM — I MERGENCY OOKS WARNING! QUIPPED (EARS) Do not use a chain for freeing a stuck  Your vehicle may be equipped with emergency vehicle. Chains may break, causing serious This vehicle is equipped with an Enhanced tow hooks.
Page 387: Servicing And Maintenance
SERVICING AND MAINTENANCE SCHEDULED SERVICING — GAS ENGINE If a scheduled oil change is performed by Once A Month Or Before A Long Trip: someone other than an authorized dealer, the Check engine oil level  Your vehicle is equipped with an automatic oil message can be reset by referring to the steps change indicator system.
Page 388: Maintenance Plan - Gasoline Engine
SERVICING AND MAINTENANCE — G AINTENANCE ASOLINE NGINE Required Maintenance Refer to the Maintenance Plan on the following pages for required maintenance. More frequent maintenance may be needed in severe conditions, such as dusty areas and very short trip driving. In some extreme conditions, additional maintenance not specified in the maintenance schedule may be required.
Page 389 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level.
Page 390 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace cabin air filter. Replace engine air filter. Replace spark plugs. Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Inspect the transfer case fluid, change for any of the following: police, taxi, fleet, or frequent trailer towing.
Page 391: Heavy Duty Use Of The Vehicle
SERVICING AND MAINTENANCE SCHEDULED SERVICING— DIESEL ENGINE Once A Month WARNING! Inspect the batteries, and clean and tighten  You can be badly injured working on or  CAUTION! the terminals as required. around a motor vehicle. Do only service Failure to perform the required maintenance Check the fluid levels of the coolant reservoir, work for which you have the knowledge and...
Page 392: Oil Change Indicator System - Cummins Diesel
SERVICING AND MAINTENANCE Inspection and service should also be An authorized dealer will reset the oil change If Chassis Cab models configured with optional performed anytime a malfunction is observed or indicator message after completing the B20 capability are operated with greater than suspected.
Page 393: Maintenance Plan - Cummins Diesel Engine
SERVICING AND MAINTENANCE — C AINTENANCE UMMINS IESEL NGINE Mileage or time passed (whichever comes first): Or Months: Or Kilometers: Change engine oil every 15,000 miles (24,000 km) or 12 months or 500 Hours or sooner if prompted by the oil change indicator system, whichever comes first.
Page 394 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first): Or Months: Or Kilometers: Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Inspect the brake linings.
Page 395 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first): Or Months: Or Kilometers: Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level. If using your vehicle for police, taxi, fleet, off-road or frequent trailer towing change the axle fluid.
Page 396 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first): Or Months: Or Kilometers: Change automatic transmission fluid (AISIN (AS69RC) transmission only). Change automatic transmission fluid and sump filter (AISIN (AS69RC) transmission only). Change automatic transmission fluid and filter(s) if using your vehicle for any of the following: police, fleet, or frequent trailer towing (68RFE transmission only).
Page 397 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first): Or Months: Or Kilometers: Flush and replace power steering fluid. Flush and replace engine coolant. 1. Under no circumstances should oil change intervals exceed 15,000 miles (24,000 km) or 12 months or 500 Hours, whichever comes first. 2.
Page 398: Engine Compartment
SERVICING AND MAINTENANCE ENGINE COMPARTMENT 6.4L E NGINE 1 — Engine Coolant Pressure Cap 6 — Battery 2 — Engine Coolant Reservoir 7 — Washer Fluid Reservoir Cap 3 — Engine Oil Fill 8 — Power Distribution Center (Fuses) 4 — Engine Oil Dipstick 9 —...
Page 399: L Diesel Engine - Six-Speed 68Rfe
SERVICING AND MAINTENANCE 6.7L D — S 68RFE IESEL NGINE PEED 1 — Battery 7 — Brake Fluid Reservoir Cap 2 — Engine Coolant Reservoir Cap 8 — Battery 3 — Engine Coolant Pressure Reservoir 9 — Power Distribution Center (Fuses) 4 —...
Page 400: L Diesel Engine - Six-Speed Aisin (As69Rc Hd)
SERVICING AND MAINTENANCE 6.7L D — S AISIN (AS69RC HD) IESEL NGINE PEED 1 — Battery 7 — Brake Fluid Reservoir Cap 2 — Engine Coolant Reservoir Cap 8 — Battery 3 — Engine Coolant Pressure Reservoir 9 — Power Distribution Center (Fuses) 4 —...
Page 401: Checking Oil Level - Gas Engine
SERVICING AND MAINTENANCE — G parked overnight. When checking oil after HECKING EVEL NGINE CAUTION! operating the engine, first ensure the engine is To ensure proper lubrication of your vehicle's at full operating temperature, then wait for Overfilling or underfilling the crankcase will engine, the engine oil must be maintained at the 30 minutes after engine shutdown to check cause oil aeration or loss of oil pressure.
Page 402: Maintenance-Free Battery
SERVICING AND MAINTENANCE WARNING! WARNING! CAUTION! Commercially available windshield washer Battery fluid is a corrosive acid solution and It is essential when replacing the cables on   can burn or even blind you. Do not allow the battery that the positive cable is solvents are flammable.
Page 403: Dealer Service
SERVICING AND MAINTENANCE DEALER SERVICE NOTE: NGINE Hemi engine (6.4L) at times can tick right after An authorized dealer has the qualified service Change Engine Oil — Gas Engine startup and then quiet down after approxi- personnel, special tools, and equipment to mately 30 seconds.
Page 404 SERVICING AND MAINTENANCE American Petroleum Institute (API) Engine maximum sulfated ash content of 1.00 mass % Engine Oil Viscosity — Diesel Engine is recommended for all oil used in the engine. Oil Identification Symbol — Gas Engine In ambient temperatures above 0°F (-18°C), we recommend you use SAE 10W-30 engine oil such This symbol means that the oil has The same oil change interval is to be followed...
Page 405: Engine Oil Filter
SERVICING AND MAINTENANCE Synthetic engine oils which do not have both the NGINE ILTER engine oil certification mark and the correct SAE The engine oil filter should be replaced with a viscosity grade number should not be used. new filter at every engine oil change. Materials Added To Engine Oil Engine Oil Filter Selection The manufacturer strongly recommends...
Page 406 SERVICING AND MAINTENANCE Engine Air Cleaner Filter Inspection And 3. Remove the air cleaner filter element from WARNING! the housing assembly. Replacement — Gas Engine The air induction system (air cleaner, hoses, Inspect engine air cleaner filter for dirt and or etc.) can provide a measure of protection in debris, if you find evidence of either dirt or the case of engine backfire.
Page 407: Air Conditioner Maintenance
SERVICING AND MAINTENANCE 3. Tighten the fasteners (six) on the air cleaner 2. Lift the air cleaner cover to access the air 2. Install the air cleaner cover onto the filter assembly cleaner filter. housing assembly locating tabs. 3. Remove the air cleaner filter element from 3.
Page 408 SERVICING AND MAINTENANCE NOTE: WARNING! WARNING! (Continued) Use only manufacturer approved A/C system PAG compressor oil and refrigerants. Do not remove the cabin air filter while the The air conditioning system contains refrig-  erant under high pressure. To avoid risk of vehicle is running, or while the ignition is in Refrigerant Recovery And Recycling —...
Page 409 SERVICING AND MAINTENANCE Right Side Of Glove Compartment Glove Compartment Filter Cover Removal 1 — Glove Compartment Door 1 — Glove Compartment Travel Stop 1 — Finger Tabs 2 — Glove Compartment Tension Tether 2 — Glove Compartment Tension Tether 3 —...
Page 410: Accessory Drive Belt Inspection
SERVICING AND MAINTENANCE 6. Install the cabin air filter with the arrow on 9. Reattach the glove compartment tension the filter pointing toward the floor. When tether by inserting the tether clip in the installing the filter cover, press on each end glove compartment and sliding the clip until you hear an audible click.
Page 411: Draining Fuel/Water Separator Filter - Diesel Engine
SERVICING AND MAINTENANCE When inspecting accessory drive belts, small Belt slips models second filter location is on the frame  cracks that run across ribbed surface of belt behind the front axle. The best access to this “Groove jumping" (belt does not maintain ...
Page 412: Engine Mounted Fuel Filter Replacement - Diesel Engine
SERVICING AND MAINTENANCE If the “Water In Fuel Indicator Light” comes on Drain the fuel/water separator filters when the The sensor drain should not be over-tightened and a single chime is heard while you are “Water In Fuel Indicator Light” is ON. Within during normal service operations to avoid driving, or with the ignition switch in the ON 10 minutes of vehicle shutdown, turn the...
Page 413 SERVICING AND MAINTENANCE 1. Ensure engine is turned off. 8. Install new o-ring back into ring groove on the filter housing and lubricate with clean 2. Place drain pan under the fuel filter drain engine oil. hose. 9. Remove new filter cartridge from plastic bag 3.
Page 414: Underbody Mounted Fuel Filter Replacement - Diesel Engine
SERVICING AND MAINTENANCE 7. Wipe clean the sealing surfaces of the lid NDERBODY OUNTED ILTER CAUTION! and housing. — D EPLACEMENT IESEL NGINE Diesel fuel will damage blacktop paving  8. Install new o-ring back into ring groove on surfaces. Drain the filter into an appro- NOTE: the filter housing and lubricate with clean priate container.
Page 415: Message Process Flow
SERVICING AND MAINTENANCE switch to the off position, and leave off for at NTERVENTION EGENERATION CAUTION! least 30 seconds. Repeat this procedure — M TRATEGY ESSAGE ROCESS three times before cranking the engine. Due to lack of lubricants in alcohol or The Cummins diesel engine meets all gasoline, the use of these fuels can cause 3.
Page 416: Diesel Exhaust Fluid
You can receive assistance in locating DEF in Spring. Apply a small amount of a high quality further information. the United States by calling 866-RAM-INFO lubricant, such as Mopar Lock Cylinder (866-726-4636). In Canada call Lubricant directly into the lock cylinder.
Page 417 SERVICING AND MAINTENANCE Avoid using the wiper blades to remove frost or Wiper Blade Removal/Installation 3. Tilt the lower end of the wiper blade away ice from the windshield. Keep the blade rubber from the arm and use one finger push the CAUTION! out of contact with petroleum products such as release tab toward the wiper arm.
Page 418: Exhaust System
SERVICING AND MAINTENANCE blade down toward the base of the wiper 3. Insert the receiver bracket on the wiper connections could permit exhaust fumes to arm and away from the J hook in the end of assembly into the hook on the tip of the arm seep into the passenger compartment.
Page 419: Cooling System
SERVICING AND MAINTENANCE NOTE: OOLING YSTEM CAUTION! Intentional tampering with emissions control The catalytic converter requires the use of systems can result in civil penalties being WARNING!  unleaded fuel only. Leaded gasoline will assessed against you. You or others can be badly burned by hot ...
Page 420 SERVICING AND MAINTENANCE Engine Coolant Checks damage. If any coolant is needed to be added to will need to be drained, flushed, and refilled with fresh OAT coolant (conforming to the system please contact an authorized Check the engine coolant (antifreeze) dealer.
Page 421 SERVICING AND MAINTENANCE be used up to ten years or 150,000 miles Use only high purity water such as distilled or Cooling System Pressure Cap  (240,000 km) before replacement. To prevent deionized water when mixing the water/ The cap must be fully tightened to prevent loss engine coolant (antifreeze) solution.
Page 422 SERVICING AND MAINTENANCE Disposal Of Used Coolant Points To Remember If frequent engine coolant (antifreeze) addi-  tions are required, the cooling system should Used ethylene glycol-based coolant (antifreeze) is NOTE: be pressure tested for leaks. a regulated substance requiring proper disposal. When the vehicle is stopped after a few miles/ Check with your local authorities to determine the Maintain engine coolant (antifreeze) concen-...
Page 423: Charge Air Cooler - Inter-Cooler
SERVICING AND MAINTENANCE — I “Maintenance Plan” in this section for the a leak and a system check should be HARGE OOLER NTER OOLER proper maintenance intervals. conducted. The charge air cooler is positioned below the Refer to “Fluids And Lubricants” in “Technical radiator and the air conditioner condenser.
Page 424: Automatic Transmission
SERVICING AND MAINTENANCE CAUTION! CAUTION! WARNING! (Continued) Using a transmission fluid other than the Do not use chemical flushes in your Overfilling the brake fluid reservoir can  result in spilling brake fluid on hot engine manufacturer’s recommended fluid may transmission as the chemicals can damage parts, causing the brake fluid to catch fire.
Page 425 SERVICING AND MAINTENANCE transmission is not functioning properly, or dipstick at normal operating temperature. If CAUTION! the vehicle cannot be driven, see the NOTE the fluid level is low, add fluid through the If a transmission fluid leak occurs, visit an and CAUTION below about checking the dipstick tube to bring it to the proper level.
Page 426: Rear Axle And 4X4 Front Driving Axle Fluid Level
SERVICING AND MAINTENANCE Fluid And Filter Changes — Eight-Speed Refer to “Fluids And Lubricants” in “Technical CAUTION! Specifications” for further information. This Transmission If the fluid temperature is below 50°F (10°C) inspection should be made with the vehicle in a Under normal operating conditions, the fluid it may not register on the dipstick.
Page 427: Transfer Case
SERVICING AND MAINTENANCE NOTE: Required Maintenance For Noise Control OISE ONTROL YSTEM EQUIRED Slight noise and mild shuddering may be Systems & W AINTENANCE ARRANTY evident while turning a vehicle with limited slip The following maintenance services must be All vehicles built over 10,000 lbs. (4,535 kg) differential on concrete or dry pavement.
Page 428 SERVICING AND MAINTENANCE Air Cleaner Assembly Among those acts presumed to constitute Noise Emission Warranty tampering are the acts listed below. The manufacturer warrants that this vehicle as Inspect air cleaner housing for proper assembly manufactured by the manufacturer, was and fit.
Page 429 SERVICING AND MAINTENANCE Maintenance Log and Service Chart (Diesel Engines) Noise Systems Maintenance Chart and Service Log — Insert Month, Day, Year under column mileage closest to the mileage at which service was performed. MILES 7,500 15,000 22,500 30,000 37,500 45,000 52,500 60,000...
Page 430 SERVICING AND MAINTENANCE Noise Systems Maintenance Chart and Service Log — Insert Month, Day, Year under column mileage closest to the mileage at which service was performed. MILES 67,500 75,000 82,500 90,000 97,500 105,000 112,500 120,000 KILOMETERS 108,000 120,000 132,000 144,000 156,000 168,000...
Page 431: Hoisting
SERVICING AND MAINTENANCE HOISTING Tire Markings NOTE: P (Passenger) — Metric tire sizing is based on A conventional floor jack may be used at the  US design standards. P-Metric tires have the jacking locations. However, a floor jack or frame letter “P”...
Page 432 SERVICING AND MAINTENANCE Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
Page 433 SERVICING AND MAINTENANCE EXAMPLE: H = Speed Symbol A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions  The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle ...
Page 434 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.
Page 435 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a Cold Tire Inflation Pressure minimum of three hours.
Page 436 SERVICING AND MAINTENANCE Tire And Loading Information Placard Loading Steps For Determining Correct Load Limit— The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on (1) Locate the statement “The combined your vehicle. You will not exceed the tire's load weight of occupants and cargo should carrying capacity if you adhere to the loading never exceed XXX kg or XXX lbs.”...
Page 437: Tires - General Information
SERVICING AND MAINTENANCE (5) Determine the combined weight of — G NOTE: IRES ENERAL NFORMATION luggage and cargo being loaded on the If your vehicle will be towing a trailer, load  Tire Pressure vehicle. That weight may not safely from your trailer will be transferred to your Proper tire inflation pressure is essential to the exceed the available cargo and luggage...
Page 438 SERVICING AND MAINTENANCE Fuel Economy CAUTION! WARNING! (Continued) Underinflated tires will increase tire rolling After inspecting or adjusting the tire pressure, Overinflated or underinflated tires can  resistance resulting in higher fuel consumption. affect vehicle handling and can fail always reinstall the valve stem cap. This will Tread Wear suddenly, resulting in loss of vehicle prevent moisture and dirt from entering the...
Page 439 SERVICING AND MAINTENANCE the cold tire inflation pressure should be Tire Repair WARNING! increased by 3 psi (21 kPa), which equals 1 psi If your tire becomes damaged, it may be (7 kPa) for every 12°F (7°C) for this outside High speed driving with your vehicle under repaired if it meets the following criteria: temperature condition.
Page 440 SERVICING AND MAINTENANCE Run Flat Tires — If Equipped Tire Spinning Run Flat tires allow you the capability to drive When stuck in mud, sand, snow, or ice 50 miles (80 km) at 50 mph (80 km/h) after a conditions, do not spin your vehicle's wheels rapid loss of inflation pressure.
Page 441 SERVICING AND MAINTENANCE Life Of Tire NOTE: It is recommended to replace the two front tires Wheel valve stem must be replaced as well or two rear tires as a pair. Replacing just one tire The service life of a tire is dependent upon when installing new tires due to wear and tear can seriously affect your vehicle’s handling.
Page 442: Tire Types
SERVICING AND MAINTENANCE sidewall. Use all season tires only in sets of four; Snow Tires WARNING! (Continued) failure to do so may adversely affect the safety Some areas of the country require the use of and handling of your vehicle. Never use a tire with a smaller load index or ...
Page 443: Spare Tires - If Equipped
SERVICING AND MAINTENANCE — I Compact Spare Tire — If Equipped PARE IRES QUIPPED WARNING! The compact spare is for temporary emergency Compact and collapsible spares are for CAUTION! use only. You can identify if your vehicle is temporary emergency use only. With these equipped with a compact spare by looking at Because of the reduced ground clearance, do spares, do not drive more than 50 mph...
Page 444: Wheel And Wheel Trim Care
SERVICING AND MAINTENANCE Since this tire has limited tread life, the original Full Size Spare — If Equipped WARNING! equipment tire should be repaired (or replaced) The full size spare is for temporary emergency and reinstalled on your vehicle at the first Limited use spares are for emergency use use only.
Page 445: Tire Chains And Traction Devices
SERVICING AND MAINTENANCE Your wheels are susceptible to deterioration Chrome Cleaner or their equivalent is Dark Vapor Chrome, Black Satin Chrome, or caused by salt, sodium chloride, magnesium recommended or select a non-abrasive, Low Gloss Clear Coat Wheels chloride, calcium chloride, etc., and other road non-acidic cleaner for aluminum or chrome CAUTION! wheels.
Page 446: Tire Rotation Recommendations
SERVICING AND MAINTENANCE 2500 Models WARNING! CAUTION! (Continued) Install on rear tires only.  Using tires of different size and type (M+S, Drive cautiously and avoid severe turns and  For LT245/70R17E, LT275/70R18E and Snow) between front and rear axles can large bumps, especially with a loaded ...
Page 447 SERVICING AND MAINTENANCE increase tread life, help to maintain mud, snow Dual Rear Wheels — If Equipped After a tire rotation is completed, as shown  and wet traction levels and contribute to a below, the system can auto learn the loca- The tires used on dual wheel assemblies should tions of each sensor ID.
Page 448: Department Of Transportation
SERVICING AND MAINTENANCE READWEAR WARNING! CAUTION! (Continued) The Treadwear grade is a comparative The traction grade assigned to this tire is When replacing a flat, the spare tire may  rating, based on the wear rate of the tire have to be remounted on the rim, or based on straight-ahead braking traction when tested under controlled conditions installed at a different location, to maintain...
Page 449: Storing The Vehicle
SERVICING AND MAINTENANCE BODYWORK represent higher levels of performance The most common causes are: on the laboratory test wheel, than the Road salt, dirt and moisture accumulation.  ROTECTION TMOSPHERIC minimum required by law. Stone and gravel impact.  GENTS WARNING! Insects, tree sap and tar.
Page 450: Preserving The Bodywork
SERVICING AND MAINTENANCE Tri-Fold Soft Tonneau Cover Care — If CAUTION! CAUTION! Equipped Do not use abrasive or strong cleaning Do not use scouring pads, steel wool, a bristle  For cleaning and protecting the vinyl Tri-Fold materials such as steel wool or scouring brush, metal polishes, or oven cleaner.
Page 451 SERVICING AND MAINTENANCE If you detect any stone chips or scratches in Weathering and UV exposure will lead to fading,  WARNING! the paint, touch them up immediately. The dulling, and loss of gloss over time. cost of such repairs is considered the respon- Do not use silicon-based protection products To help maintain the appearance of your sibility of the owner.
Page 452: Interiors
SERVICING AND MAINTENANCE INTERIORS For grease stains, apply Mopar Multi-Purpose  WARNING! Cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove A frayed or torn belt could rip apart in a EATS ABRIC ARTS soap residue.
Page 453: Leather Parts
SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster taken to avoid soaking your leather upholstery LASS URFACES with any liquid. Please do not use polishes, oils, Lenses All glass surfaces should be cleaned on a cleaning fluids, solvents, detergents, or The lenses in front of the instruments in this regular basis with Mopar Glass Cleaner, or any ammonia-based cleaners to clean your leather vehicle are molded in clear plastic.
Page 454: Technical Specifications
TECHNICAL SPECIFICATIONS IDENTIFICATION DATA WHEEL AND TIRE TORQUE SPECIFICATIONS However, you will experience a substantial increase in braking effort to stop the vehicle. Proper lug nut/bolt torque is very important to EHICLE DENTIFICATION UMBER If either the front or rear hydraulic system loses ensure that the wheel is properly mounted to normal braking capability, the remaining The Vehicle Identification Number (VIN) is found...
Page 455 TECHNICAL SPECIFICATIONS NOTE: Dual wheels are flat mounted, center piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the lug nut/bolt and the washer.
Page 456: Fuel Requirements - Gas Engine
TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS — GAS ENGINE www.toptiergas.com for a list of TOP TIER EFORMULATED ASOLINE Detergent Gasoline Retailers. Many areas of the country require the use of 6.4L E NGINE Indiscriminate use of fuel system cleaning cleaner burning gasoline referred to as Do not use E-85 flex fuel or ethanol blends agents should be avoided.
Page 457: Do Not Use E-85 In Non-Flex Fuel
TECHNICAL SPECIFICATIONS CNG A LP F Problems that result from using gasoline YSTEM YSTEM AUTIONS containing more than 15% ethanol (E-15) or ODIFICATIONS gasoline containing methanol are not the CAUTION! Modifications that allow the engine to run on responsibility of the manufacturer and may void Follow these guidelines to maintain your Compressed Natural Gas (CNG) or Liquid or not be covered under New Vehicle Limited...
Page 458: Carbon Monoxide Warnings
TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS – DIESEL ENGINE NOTE: WARNING! Intentional tampering with the emissions Use good quality diesel fuel from a reputable control system can result in civil penalties being Do not use alcohol or gasoline as a fuel supplier in your vehicle. Federal law requires assessed against you.
Page 459: Fuel Specifications
TECHNICAL SPECIFICATIONS In addition, commercially available fuel addi- Biodiesel is a fuel produced from renewable PECIFICATIONS  tives are not necessary for the proper opera- resources typically derived from animal fat, The Cummins® Turbo Diesel engine has been tion of your Cummins diesel engine. rapeseed oil (Rapeseed Methyl Ester (RME) developed to take advantage of the high energy However, if seasonably adjusted fuel is not...
Page 460 Mopar/Cummins filtration system is designed 20%. maintained to the following schedule: to provide adequate fuel water separation capabilities. Ram PickUp 2500/3500 Only — 15,000 Miles* (*unless otherwise notified with a oil service message)
Page 461: Fluid Capacities - Gas Engine
TECHNICAL SPECIFICATIONS FLUID CAPACITIES — GAS ENGINE Metric Fuel (Approximate) 2500/3500 Shortbed Models 31 Gallons 117 Liters 2500/3500 Longbed Models 32 Gallons 121 Liters 2500/3500 Crew Cab Longbed Models — If Equipped 50 Gallons 189 Liters Engine Oil With Filter 6.4L Engine (We recommend you use SAE 0W-40 engine oil meeting the requirements of 7 Quarts 6.6 Liters...
Page 462: Fluid Capacities - Diesel Engine
TECHNICAL SPECIFICATIONS FLUID CAPACITIES — DIESEL ENGINE Metric Fuel (Approximate) 2500/3500 Standard Cab Longbed 28 Gallons 106 Liters Models 2500/3500 Crew/Mega Cab 31 Gallons 117 Liters Shortbed Models 2500/3500 Crew Cab Longbed 32 Gallons 121 Liters Models 2500/3500 Crew Cab Longbed 50 Gallons 189 Liters Models —...
Page 463: Fluids And Lubricants - Gas Engine
TECHNICAL SPECIFICATIONS FLUIDS AND LUBRICANTS — GAS ENGINE NGINE Component Fluid, Lubricant, or Genuine Part We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Engine Coolant Mile (240,000 km) Formula OAT (Organic Additive Technology). For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of Engine Oil –...
Page 464 TECHNICAL SPECIFICATIONS CAUTION! CAUTION! (Continued) Mixing of engine coolant (antifreeze) other Do not use water alone or alcohol-based   than specified Organic Additive Technology engine coolant (antifreeze) products. Do (OAT) engine coolant (antifreeze), may not use additional rust inhibitors or antirust result in engine damage and may decrease products, as they may not be compatible corrosion protection.
Page 465: Chassis
We recommend you use Mopar Transfer Case Lubricant for Borg Warner Transfer Case 44-44 and 44-45. We recommend you use SAE 75W-85 HD Ram GL-5 Synthetic Axle Lubricant in 9.25 Front, 11.5 and 12.0 (Single Rear Wheel) Rear Axles. Front and Rear Axle Use Mopar GL-5 Synthetic Gear Lubricant SAE 75W-140 in 12.0 (Dual...
Page 466: Fluids And Lubricants - Diesel Engine
TECHNICAL SPECIFICATIONS FLUIDS AND LUBRICANTS — DIESEL ENGINE NGINE Component Fluid, Lubricant, or Genuine Part We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Engine Coolant Additive Technology). In ambient temperatures above 0°F (-18°C), we recommend you use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
Page 467 Use of fluids not API Certified to ISO 22241 may result in system damage. You can receive assistance in locating DEF Diesel Exhaust Fluid in the United States by calling 866-RAM-INFO (866-726-4636). In Canada call 1–800–465–2001 (English) or 1–800–387–9983 (French).
Page 468: Chassis
Transfer Case We recommend you use Mopar BW44–44 Transfer Case Fluid. We recommend you use SAE 75W-85 HD Ram GL-5 Synthetic Axle Lubricant in 9.25 Front, 11.5 and 12.0 (Single Rear Wheel) Rear Axles. Front and Rear Axle Fluid (2500/3500) Use Mopar GL-5 Synthetic Gear Lubricant SAE 75W-140 in 12.0 (Dual...
Page 469: Multimedia
MULTIMEDIA UCONNECT SYSTEMS computer or other devices, your vehicle may WARNING! (Continued) require software updates to improve the usability For detailed information about your Uconnect and performance of your systems or to reduce the As always, if you experience unusual ...
Page 470: Uconnect Settings
MULTIMEDIA Privacy of any wireless and wired Your Uconnect system may also have Screen the Uconnect system allows you to access communications cannot be assured. Third Off and Mute buttons on the faceplate. programmable features that may be equipped parties may unlawfully intercept information such as Display, Units, Voice, Clock, Safety &...
Page 471 MULTIMEDIA Language After pressing the Language button on the touchscreen, the following setting will be available: Setting Name Selectable Options Set Language English Français Español NOTE: When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Español) for all display nomenclature, including the trip functions and the navigation system (if equipped).
Page 472 MULTIMEDIA Units After pressing Units on the touchscreen, the following settings will be available: Setting Name Selectable Options Units Metric Custom Speed km/h Distance Fuel Consumption MPG (UG) MPG (UK) L/100 km km/L Pressure Power — If Equipped HP (US) HP (UK) Temperature °C...
Page 473 MULTIMEDIA Clock After pressing the Clock button on the touchscreen, the following settings will be available: Setting Name Selectable Options 12 hour 24 hour Set Time & Format Sync Time Safety/Assistance After pressing the Safety/Assistance button on the touchscreen, the following settings will be available: Setting Name Selectable Options Forward Collision Warning —...
Page 474 MULTIMEDIA Setting Name Selectable Options Tilt Side Mirrors In Reverse — If Equipped NOTE: When the “Tilt Side Mirrors In Reverse” feature is selected, the exterior side-view mirrors tilt downward when the ignition is in the ON/RUN position and the transmission gear selector is in the REVERSE position. The mirrors move back to their previous position when the transmission is shifted out of REVERSE.
Page 475 MULTIMEDIA Setting Name Selectable Options ParkView Backup Camera Active Guidelines NOTE: Your vehicle may be equipped with the ParkView Backup Camera Active Guidelines that allows you to see active guidelines over the ParkView Backup camera display whenever the gear selector is put into REVERSE. The image will be displayed on the radio touchscreen display along with a caution note to “check entire surroundings”...
Page 476 MULTIMEDIA Setting Name Selectable Options Rain Sensing Auto Wipers — If Equipped NOTE: When the “Rain Sensing Auto Wipers” feature is selected, the system automatically activates the windshield wipers if it senses moisture on the windshield. Hill Start Assist — If Equipped NOTE: When the “Hill Start Assist”...
Page 477 MULTIMEDIA Setting Name Selectable Options Headlights With Wipers — If Equipped Auto Dim High Beams — If Equipped Daytime Running Lights Flash Lights With Lock NOTE: When the “Flash Lights With Lock” feature is selected, the exterior lights flash when the doors are locked or unlocked with the key fob. This feature may be selected with or without the Sound Horn On Lock feature selected.
Page 478 MULTIMEDIA Doors & Locks After pressing the Doors & Locks button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto Door Locks — If Equipped NOTE: When the “Auto Door Locks” feature is selected, all doors lock automatically when the vehicle reaches a speed of 15 mph (24 km/h). Auto Unlock On Exit NOTE: When the “Auto Unlock On Exit”...
Page 479 MULTIMEDIA Setting Name Selectable Options Memory Linked To Fob — If Equipped NOTE: The “Memory Linked To Fob” feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle.  The seat returns to the memorized seat location if “Memory Linked To Fob” is set to On when the key fob is used to unlock the door. ...
Page 480 MULTIMEDIA Power Side Steps — If Equipped After pressing the Power Side Steps button on the touchscreen, the following setting will be available: Setting Name Selectable Options Power Side Steps Automatic Stow Auto-On Comfort Systems — If Equipped After pressing the Auto-On Comfort Systems button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated/Ventilated...
Page 481 MULTIMEDIA Setting Name Selectable Options 0 sec 45 sec Engine Off Power Delay 5 min 10 min Setting Name Selectable Options Auto Entry/Exit — If Equipped Suspension — If Equipped After pressing the Suspension button on the touchscreen, the following settings will be available: Setting Name Selectable Options Display Suspension Messages...
Page 482 MULTIMEDIA Trailer Brake — If Equipped After pressing the Trailer Brake button on the touchscreen, the following settings will be available: Setting Name Selectable Options Trailer Select Trailer 1 Trailer 2 Trailer 3 Trailer 4 Trailer Brake Type Light Electric Heavy Electric Light EOH Heavy EOH...
Page 483 MULTIMEDIA Setting Name Selectable Options Surround Sound — If Equipped NOTE: The “Surround Sound” feature provides simulated surround sound mode. AUX Volume Offset — If Equipped NOTE: The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the AUX input. Auto Play —...
Page 484 MULTIMEDIA SiriusXM® Setup — If Equipped After pressing the SiriusXM® Setup button on the touchscreen, the following settings will be available: Setting Name Selectable Options Tune Start Channel Skip List of Channels NOTE: SiriusXM® can be programmed to exclude undesirable channels while scanning. To make your selection, press the Channel Skip button on the touch- screen, select the channels you would like to skip.
Page 485 MULTIMEDIA Restore Default Settings After pressing the Restore Default Settings button on the touchscreen, the following setting will be available: Setting Name Selectable Options Restore Default Settings NOTE: When the “Restore Default Settings” feature is selected it will reset the Display, Clock, Audio, and Radio Settings to their default settings. If “Yes” is selected a pop-up will appear asking "Are you sure you want to reset your settings to default?”...
Page 486: Uconnect 4/4C/4C Nav Settings
MULTIMEDIA 4/4C/4C NAV S Press the Apps button on the touchscreen then When making a selection, press the button on CONNECT ETTINGS press the Settings button on the touchscreen to the touchscreen to enter the desired menu. display the settings menu screen. In this mode Once in the desired menu, press and release the Uconnect system allows you to access the preferred setting until a check mark...
Page 487 MULTIMEDIA Language After pressing the Language button on the touchscreen, the following setting will be available: Setting Name Selectable Options Set Language English Français Español NOTE: When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Español) for all display nomenclature, including the trip functions and the navigation system (if equipped).
Page 488 MULTIMEDIA Setting Name Selectable Options Display Brightness With Headlights OFF – NOTE: To make changes to the "Display Brightness With Headlights OFF" setting, the headlights must be off and the interior dimmer switch must not be in the "party" or "parade" position. Touchscreen Beep Controls Screen Time-Out —...
Page 489 MULTIMEDIA Setting Name Selectable Options Speed km/h Distance Fuel Consumption MPG (US) MPG (UK) L/100 km km/L Pressure Power — If Equipped HP (US) HP (UK) Temperature °F °C Torque — If Equipped lb-ft Voice After pressing the Voice button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length...
Page 490 MULTIMEDIA Setting Name Selectable Options 12 hrs 24 hrs Time Format Show Time In Status Bar — If Equipped NOTE: The “Show Time In Status Bar” feature allows you to turn on or shut off the digital clock in the status bar. Camera After pressing the Camera button on the touchscreen, the following settings will be available: Setting Name...
Page 491 MULTIMEDIA Setting Name Selectable Options ParkView Backup Camera Delay NOTE: The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image with dynamic grid lines for up to 10 seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF position.
Page 492 MULTIMEDIA Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: Setting Name Selectable Options Surround View Camera — If Equipped NOTE: The “Surround View Camera” feature displays a complete 360 degree view of the vehicle's exterior environment while backing up. Surround View Camera Delay —...
Page 493 MULTIMEDIA Setting Name Selectable Options Active Parkview Backup Camera Guidelines NOTE: The “Active ParkView Backup Camera Guidelines” feature overlays the Rear Backup Camera image with active or dynamic grid lines to help illustrate the width of the vehicle and its projected backup path, based on the steering wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist with parking or aligning to a hitch/receiver.
Page 494 MULTIMEDIA Setting Name Selectable Options Forward Collision Warning Near Sensitivity — If Equipped NOTE: Sets the distance in which a Forward Collision Warning occurs. Front ParkSense Volume — If High Equipped Rear ParkSense Volume — If High Equipped Power Side Steps — If Equipped Auto Store Blind Spot Alert —...
Page 495 MULTIMEDIA Setting Name Selectable Options Rain Sensing Auto Wipers — If Equipped NOTE: Automatically adjusts the wiper speed based on the amount of precipitation. Headlights with Wipers Lights After pressing the Lights button on the touchscreen, the following settings will be available: Setting Name Selectable Options Headlight Off Delay...
Page 496 MULTIMEDIA Setting Name Selectable Options Auto Dim High Beams — If Equipped NOTE: When the “Auto Dim High Beams” feature is selected, the high beam headlights deactivate automatically under certain conditions. Daytime Running Lights — If Equipped NOTE: When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned On or Off. This feature is only available if allowed by law in the country of the vehicle purchase.
Page 497 MULTIMEDIA Setting Name Selectable Options Auto Unlock On Exit NOTE: When the “Auto Unlock On Exit” feature is selected, all doors unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position, and the driver's door is opened. Flash Lights With Lock NOTE: When the “Flash Lights With Lock”...
Page 498 MULTIMEDIA Setting Name Selectable Options Passive Entry — If Equipped NOTE: The “Passive Entry” feature allows you to lock and unlock the vehicle’s door(s) without having to push the key fob Lock or Unlock buttons. Personal Settings Linked To Key Fob —...
Page 499 MULTIMEDIA Auto-On Comfort Systems — If Equipped After pressing the Auto-On Comfort Systems button on the touchscreen, the following setting will be available: Setting Name Selectable Options Auto-On Driver Heated/Ventilated Seat & Steering Wheel With Vehicle Remote Start All Starts Start —...
Page 500 MULTIMEDIA Setting Name Selectable Options Headlight Off Delay – NOTE: When the “Headlight Off Delay” feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. Setting Name Selectable Options Auto Entry/Exit —...
Page 501 MULTIMEDIA Setting Name Selectable Options Wheel Alignment Mode NOTE: Before performing a wheel alignment, the “Wheel Alignment Mode” must be enabled. Refer to an authorized dealer for further information. Trailer — If Equipped After pressing the Trailer button on the touchscreen, the following settings will be available: Setting Name Selectable Options Trailer...
Page 502 MULTIMEDIA Setting Name Selectable Options NOTE: After pressing Next, the Tire Pressure screen appears. The default for this option is 50 PSI (344 kPa), however the range is selectable anywhere between 25–125 PSI (172–862 kPa). Once PSI (kPa) is programmed, the pairing screen appears. Tire sensors must be paired in order shown. Starting with Tire 1, deflate tire by 5 PSI (34 kPa) and wait for a horn chirp.
Page 503 MULTIMEDIA Setting Name Selectable Options Speed Adjusted Volume NOTE: The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed. Surround Sound — If Equipped NOTE: The “Surround Sound” feature provides simulated surround sound mode. AUX Volume Offset — If Equipped NOTE: The “AUX Volume Offset”...
Page 504 MULTIMEDIA Setting Name Selectable Options Paired Phones and Audio Devices List Of Paired Phones and Audio Sources NOTE: The “Paired Phones and Audio Devices” feature shows which phones and audio sources are paired to the Phone and Audio Sources Settings system. For further information, refer to the Uconnect Owner’s Manual Supplement.
Page 505 MULTIMEDIA Setting Name Selectable Options Subscription Info Sirius ID NOTE: New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM® Satellite Radio with your radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription Information screen to re-subscribe. 1.
Page 506 MULTIMEDIA Clear Personal Data After pressing the Clear Personal Data Settings button on the touchscreen, the following setting will be available: Setting Name Selectable Options Clear Personal Data NOTE: When this feature is selected it will remove all personal data including Bluetooth® devices and presets. If “Yes” is selected a pop-up will appear asking "Are you sure you want to clear all personal data?”...
Page 507: Uconnect 4C Nav With 12-Inch
MULTIMEDIA 4C NAV W When making a selection, press the button on CONNECT INCH 1 — Uconnect Buttons On The Touchscreen the touchscreen to enter the desired menu. ISPLAY ETTINGS 2 — Uconnect Buttons On The Faceplate Once in the desired menu, press and release the preferred setting until a check mark Press the Settings button on the touchscreen to appears next to the setting, showing that setting...
Page 508 MULTIMEDIA Language After pressing the Language button on the touchscreen, the following setting will be available: Setting Name Selectable Options Language English Español Français NOTE: When the Language feature is selected, you may select one of multiple languages (English / Français / Español) for all display nomenclature, including the trip functions and the navigation system (if equipped).
Page 509 MULTIMEDIA Setting Name Selectable Options Set Theme Pre-configured Themes Touchscreen Beep Controls Screen Timeout — If Equipped Fuel Saver Display — If Equipped NOTE: When selected, the system displays fuel saver mode in the instrument cluster. Navigation Turn-by-Turn Displayed in Cluster — If Equipped Phone Pop-ups Displays In Cluster Ready To Drive Pop-Ups —...
Page 510 MULTIMEDIA Setting Name Selectable Options Pressure Power — If Equipped HP (US) HP (UK) Temperature °F °C Torque — If Equipped lb-ft Voice Settings After pressing the Voice Settings button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length Brief...
Page 511 MULTIMEDIA Camera After pressing the Camera button on the touchscreen, the following settings will be available: Setting Name Selectable Options Surround View Camera — If Equipped NOTE: The “Surround View Camera” feature displays a complete 360 degree view of the vehicle's exterior environment while backing up. Surround View Camera Delay —...
Page 512 MULTIMEDIA Setting Name Selectable Options Parkview Camera Delay — If Equipped NOTE: The “Parkview Camera Delay” setting determines whether or not the screen will display the rear view image with dynamic grid lines for up to 10 seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF position.
Page 513 MULTIMEDIA Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: Setting Name Selectable Options Forward Collision Warning — If Warning Only Warning & Active Braking Equipped NOTE: Sounds an audible warning for the driver to slow the vehicle in case of collision or sounds an audible warning and applies brakes. Forward Collision Warning Near Sensitivity —...
Page 514 MULTIMEDIA Mirrors & Wipers After pressing the Mirror & Wipers button on the touchscreen, the following settings will be available: Setting Name Selectable Options Tilt Side Mirrors In Reverse — If Equipped NOTE: When the “Tilt Side Mirrors In Reverse” feature is selected, the outside side-view mirrors will tilt downward when the ignition is in the ON/RUN position and the transmission gear selector is in the REVERSE position.
Page 515 MULTIMEDIA Setting Name Selectable Options Headlight Illumination On Approach – NOTE: When the “Headlight Illumination On Approach” feature is selected, the headlights will activate and remain on for 0, 30, 60, or 90 seconds when the doors are unlocked with the key fob. Headlights With Wipers —...
Page 516 MULTIMEDIA Setting Name Selectable Options Flash Lights with Lock NOTE: When the “Flash Lights With Lock” feature is selected, the exterior lamps flash when the doors are locked or unlocked with the key fob. This feature may be selected with or without the “Sound Horn With Lock” feature selected. Rear Guidance Lights w/ Cargo Lights—...
Page 517 MULTIMEDIA Setting Name Selectable Options Sound Horn With Remote Start 1st Press Of Key Fob Unlocks Driver Door All Doors NOTE: When “1st Press Of Key Fob Unlocks: Driver Door” is programmed, only the driver's door unlocks on the first press of the key fob unlock button. ...
Page 518 MULTIMEDIA Auto-On Comfort & Remote Start — If Equipped After pressing the Auto-On Comfort & Remote Start button on the touchscreen, the following setting will be available: Setting Name Selectable Options Auto-On Driver Heated/Vented Seat Remote Start All Starts & Steering Wheel — If Equipped NOTE: When the “Auto-On Driver Heated/Vented Seat &...
Page 519 MULTIMEDIA Setting Name Selectable Options Auto Entry/Exit — If Equipped Easy Exit Seat — If Equipped NOTE: When the “Easy Exit Seat” feature is selected, the Driver’s seat will automatically move rearward once the engine is shut off. Suspension — If Equipped After pressing the Suspension button on the touchscreen, the following settings will be available: Setting Name Selectable Options...
Page 520 MULTIMEDIA Trailer Brake After pressing the Trailer Brake button on the touchscreen, the following settings will be available: Setting Name Selectable Options Trailer Trailer 1 Trailer 2 Trailer 3 Trailer 4 Once selecting the specific trailer, the following programmable options become available: Setting Name Selectable Options Use This Trailer...
Page 521 MULTIMEDIA Setting Name Selectable Options Trailer Name List of Trailer Names NOTE: You can select and personalize your trailer name depending on the type of trailer you are hauling. Select the trailer name from the following list: trailer, boat, car, cargo, dump, equipment, flatbed, gooseneck, horse, livestock, motorcycle, snowmobile, travel, utility, and 5th wheel. NOTE: For further information about Trailer Tire Pressure Monitoring, refer to ”Auxiliary Driving Systems”...
Page 522 MULTIMEDIA Setting Name Selectable Options Surround Sound — If Equipped NOTE: The “Surround Sound” feature provides simulated surround sound mode. AUX Volume Offset — If Equipped NOTE: The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the AUX input. Auto Play Bluetooth®...
Page 523 MULTIMEDIA Setting Name Selectable Options Smartphone Device Mirroring — If Equipped Enable CarPlay Projections — If Equipped Automatically Display Pop-Ups in Cluster — If Equipped Set as Default Device — If Equipped Projection Manager Smartphone Device Mirroring On Smartphone Device Mirroring Off SiriusXM®...
Page 524 MULTIMEDIA Setting Name Selectable Options Channel Skip List of Channels NOTE: SiriusXM® can be programmed to designate a group of channels that are the most desirable to listen to or to exclude undesirable channels while scanning. This feature allows you to select the channels you would like to skip. Subscription Info Sirius ID NOTE:...
Page 525 MULTIMEDIA Reset After pressing the Reset button on the touchscreen, the following settings will be available: Setting Name Selectable Options Reset App Drawer to Default Order Cancel Restore Settings Cancel NOTE: When the “Restore Settings” feature is selected, it resets all settings to their default settings. Clear Personal Data Cancel NOTE:...
Page 526: Safety And General Information
MULTIMEDIA SAFETY AND GENERAL INFORMATION Stop use immediately if a problem occurs. NOTE:  Failure to do so may cause injury or damage Many features of this system are speed depen- to the product. Return it to an authorized dent. For your own safety, it is not possible to AFETY UIDELINES dealer for repair.
Page 527: Uconnect 3 With 5-Inch Display
MULTIMEDIA Do not spray any liquid or caustic chemicals 1 — RADIO 6 — SCREEN OFF  directly on the screen! Use a clean and dry Push the RADIO button on the faceplate to enter Push the SCREEN OFF button to turn the microfiber lens cleaning cloth in order to Radio Mode.
Page 528: Radio Mode
MULTIMEDIA The radio is equipped with the following modes: TUNE/SCROLL Control ADIO Turn the rotary TUNE/SCROLL control knob  Operating Radio Mode clockwise to increase or counterclockwise to  decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection. SiriusXM®...
Page 529 MULTIMEDIA Seek Down Get over 160 channels on your satellite radio, available throughout our satellite service area and enjoy all you want, all in one place. Hear and in Alaska and Hawai. © 2020 SiriusXM® Press and release the Seek Down button on the commercial-free music, sports, news, talk, and Radio Inc.
Page 530 MULTIMEDIA Audio Settings Balance/Fade — Press the Balance/Fade Clock Settings  button on the touchscreen to adjust the 1. Push the SETTINGS button on the right side 1. Push the SETTINGS button on the sound from the speakers. Use the Arrow of the radio faceplate.
Page 531: Media Mode
MULTIMEDIA Audio Source Selection Seek Up/Seek Down Functions EDIA Once in Media Mode, press the Source button Seek Up /Seek Down Operating Media Mode on the touchscreen and the desired mode Press and release the Seek Up button on the button on the touchscreen.
Page 532 MULTIMEDIA Track Selection (Browse) Audio the available media by pressing the button on the touchscreen. Press the Exit button on the Rotate the Browse button on the touchscreen to Refer to “Audio Settings” for the adjustable touchscreen if you wish to cancel the Browse scroll through and select a desired track on the audio settings.
Page 533: Phone Mode
MULTIMEDIA AUX Mode The Uconnect Phone is a voice-activated, HONE hands-free, in-vehicle communications system AUX Mode is entered by inserting a AUX device Operating Phone Mode with voice command capability. Refer to Voice using a stereo cable with a 3.5 mm audio jack Recognition (VR) within this publication for into the AUX port or by pushing the MEDIA further information.
Page 534 MULTIMEDIA Phone Mode Activation Connecting/Disconnecting A Mobile 2. Push the PHONE button on the faceplate. Phone Or Bluetooth® Device Press the PHONE button on the front panel to If there are no phones currently  activate the Phone mode. connected with the system, a pop-up Pairing A Phone appears asking if you would like to pair a Main Functions...
Page 535 MULTIMEDIA If “No” is selected and you still would like to this phone the highest priority. This phone phone, so you can call them using the vehicle's pair a mobile phone, press the Settings but- will take precedence over other paired hands-free system.
Page 536 MULTIMEDIA 4. Select the specific device (mobile phone or Deletion Of A Mobile Phone Or A Setting A Mobile Phone Or A Bluetooth® Bluetooth® device). Bluetooth® Audio Device Audio Device As A Favorite To delete a mobile phone or Bluetooth® audio To set a mobile phone or Bluetooth®...
Page 537 MULTIMEDIA If equipped and specifically supported by your Only the phonebook of the currently Proceed as follows:  phone, Uconnect Phone asks you if you want to connected mobile phone is accessible. 1. Press the Keyboard icon on the display and download names (text names) and number Only the mobile phone’s phonebook is down- use the number buttons to enter the...
Page 538 MULTIMEDIA Making A Second Call While Current Call Is In Deactivate/activate the microphone Managing Two Phone Calls  Progress If two calls are in progress (one active and one Transfer the call  on hold), it is possible to switch between them When a phone conversation is active, a second Switch from one call to the other ...
Page 539: Steering Wheel Audio Controls
MULTIMEDIA STEERING WHEEL AUDIO CONTROLS — IF Ending A Call If this function is not supported by the phone, the corresponding message button is Press the End button on the touchscreen or the EQUIPPED deactivated (grayed out) or may only accept PHONE button on the steering wheel controls to incoming messages.
Page 540: Radio Operation
MULTIMEDIA IPOD®/USB/MP3 CONTROL — IF EQUIPPED The left-hand control is a rocker type switch with a push button in the center. The function of the Located on the center stack, just below the left-hand control is different depending on instrument panel, is the main media hub. There which mode you are in.
Page 541 MULTIMEDIA Applicable to only Uconnect 4C/4C NAV With 8.4-inch Display, and Uconnect 4C NAV With 12-inch Display radios, different scenarios are listed below when a non-phone device is plugged into the smaller and larger USB Ports, and when a phone device is plugged into the smaller and larger USB Ports: A new device is now connected.
Page 542: Radio Operation And Mobile Phones
MULTIMEDIA RADIO OPERATION AND MOBILE PHONES standards and recommendations, which reflect Le présent appareil est conforme aux CNR the consensus of the scientific community. d`Innovation, Science and Economic Under certain conditions, the mobile phone Development applicables aux appareils radio The radio manufacturer believes the internal being on in your vehicle can cause erratic or exempts de licence.
Page 543: Voice Recognition Quick Tips
MULTIMEDIA VOICE RECOGNITION QUICK TIPS NOTE: 3. Speak clearly at a normal pace and volume while facing straight ahead. The This equipment has been tested and found to  NTRODUCING CONNECT microphone is located in the headliner and comply with the limits for a Class B digital aimed at the driver.
Page 544: Basic Voice Commands
MULTIMEDIA ASIC OICE OMMANDS The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button on the steering wheel. After the beep, say: “Cancel” to stop a current voice session  “Help”...
Page 545: Radio
MULTIMEDIA “Change source to Bluetooth®” “Redial (call previous outgoing phone ADIO   number)” “Change source to AUX” Use your voice to quickly get to the AM, FM or  “Call back (call previous incoming phone SiriusXM® Satellite Radio stations you would ...
Page 546: Climate (4C/4C Nav)
MULTIMEDIA TIP: Push the VR button on the steering wheel. PRE-DEFINED VOICE TEXT REPLY Your mobile phone must have the full imple- After the beep, say one of the following RESPONSES mentation of the Message Access Profile (MAP) commands: Stuck in to take advantage of this feature.
Page 547: Siri® Eyes Free - If Equipped
MULTIMEDIA TIP: NOTE: SING ISTURB To start a POI search, push the VR button With Do Not Disturb, you can disable Only the beginning of your custom message  the steering wheel. After the beep, say: “Find will be seen on the touchscreen. notifications from incoming calls and texts, nearest coffee shop.”...
Page 548: Apple Carplay® - If Equipped
MULTIMEDIA ® — I “Phone” icon on the main menu bar to begin Messages PPLE QUIPPED  Android Auto™. Push and hold the VR button on Maps  NOTE: the steering wheel, or press and hold the Feature availability depends on your carrier and “Microphone”...
Page 549: Additional Information
MULTIMEDIA 1. This device may not cause harmful La operación de este equipo está sujeta a las SiriusXM® and all related marks and logos are interference, and siguientes dos condiciones: trademarks of SiriusXM® Radio Inc. Uconnect System Support: 2. This device must accept any interference 1.
Page 550: Customer Assistance
CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE dealers, you may obtain a rental vehicle at a If for some reason you are still not satisfied,  talk to the general manager or owner of the minimal daily charge. If you need a rental, it is FOR YOUR VEHICLE advisable to make these arrangements when authorized dealer.
Page 551: Fca Us Llc Customer Center
CUSTOMER ASSISTANCE FCA US LLC C additional protection beyond your vehicle’s USTOMER ENTER USTOMER SSISTANCE warranty. If you purchased a Mopar Vehicle EARING PEECH MPAIRED P.O. Box 21–8004 Protection Plan, you will receive Plan Provisions (TDD/TTY) Auburn Hills, MI 48321–8004 and an Owner Identification Card in the mail within three weeks of the vehicle delivery date.
Page 552: Warranty Information
CUSTOMER ASSISTANCE REPORTING SAFETY DEFECTS To contact NHTSA, you may call the WARNING! Vehicle Safety Hotline toll free at 50 U Engine exhaust (internal combustion engines NITED TATES 1-888-327-4236 (TTY: only), some of its constituents, and certain , D.C. ASHINGTON 1-800-424-9153);...
Page 553: Publication Order Forms
CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS Diagnostic Procedure Manuals Owner's Manuals Diagnostic Procedure Manuals are filled with These Owner's Manuals have been prepared with To order the following manuals, you may use diagrams, charts and detailed illustrations. the assistance of service and engineering either the website or the phone numbers listed These practical manuals make it easy for specialists to acquaint you with specific FCA US...
Page 554 INDEX ......405 ........50 Air Conditioner Maintenance Automatic Headlights ....405 ......74 Adaptive Cruise Control (ACC) Air Conditioner Refrigerant Automatic Tailgate Release ..........282 ......... 405 ....67 (Cruise Control) Air Conditioner System Automatic Temperature Control (ATC) ....418 ......... 57 ....... 235 Adding Engine Coolant (Antifreeze) Air Conditioning Automatic Transmission...
Page 555 Belts, Seat .............210 Cargo Light ............52 Cooling System ..........417 Blind Spot Monitoring ........153 Cellular Phone ..........540 Adding Coolant (Antifreeze) ...... 418 Body Builders Guide ........12 Center High Mounted Stop Light ....356 Coolant Level ........418 Body Mechanism Lubrication ......414 Center Seat Storage Compartment ....81...
Page 556 .....412 ........54 Diesel Fuel System, Re-Priming Emergency, In Case Of Entry System, Illuminated ........270 ..... 380 ............454 Differential, Limited Slip Freeing Vehicle When Stuck Ethanol ........381 ......346 ..........232 Disabled Vehicle Towing Hazard Warning Flasher Exhaust Brake ........... 375 ......
Page 557 Four-Way Hazard Flasher .......346 Gear Ranges ..........240 Hoisting ............429 Freeing A Stuck Vehicle .........380 Gear Selector Override ......... 377 HomeLink (Garage Door Opener) .....76 Front Axle (Differential) ........424 Glass Cleaning ..........451 Hood Prop ............74 Fuel ............. 454 Gross Axle Weight Rating ......
Page 558 ............212 ..........357 Lights Side Marker ..........365 ........130 ........148 Jack Location Air Bag Traction Control ..........375 ........49 ........... 255 Jump Starting Automatic High Beam Transfer Case ....... 148 ....51 Brake Assist Warning Turn Signals .......... 131 Brake Warning Warning Instrument Cluster ........
Page 559 Manual Overdrive ............244 Park Release ..........378 Occupant Restraints ........172 Overdrive OFF Switch ........244 Service ............551 Octane Rating, Gasoline (Fuel) ..... 454 Overheating, Engine ........379 Media Hub .............538 Off-Pavement Driving (Off-Road) ..261 Memory Seat ........... 31 Off-Road Driving (Off-Pavement) ..
Page 560 ..........74 ........130 Power Seats Release, Hood Seat Belt Reminder ............35 ..........74 ..........173 Down Release, Tailgate Seat Belts ............35 ........173 ......177 Forward Reminder, Seat Belt Adjustable Shoulder Belt ............. 35 ........14 ..177 Rearward Remote Keyless Entry Adjustable Upper Shoulder Anchorage ............
Page 561 Memory ............31 Spark Plugs ........... 461 Sunglasses Storage .........90 Power ............35 Speed Control Sunshade Operation ........73 Rear Folding ..........33 Accel/Decel ..........281 Sway Control, Trailer ........153 Reclining Rear ..........34 Cancel ............281 Synthetic Engine Oil ........
Page 562 ........436 ..........325 ..........235 Inflation Pressure Towing Transmission ..........439 ........381 .......235 Life Of Tires Disabled Vehicle Automatic ........433 ............330 ..........463 Load Capacity Guide Fluid ... 136 ..........339 ..........422 Pressure Monitoring System (TPMS) Recreational Maintenance ..........446 ............
Page 563 Universal Garage Door Opener (HomeLink) ..76 Window Fogging ..........68 Universal Transmitter ........76 Warning Lights (Instrument Cluster Windows ............70 Unleaded Gasoline ........454 Descriptions) ..........135 Power ............70 Untwisting Procedure, Seat Belt ....177 Warnings And Cautions ........12 Rear Sliding ..........71 ...............538 Warranty Information ........
Page 567 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Ram brand vehicle and to provide a convenient reference for common questions.
Page 568 ©2020 FCA US LLC. All Rights Reserved. Tous droits réservés. Ram is a registered trademark of FCA US LLC. Ram est une marque déposée de FCA US LLC. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

This manual is also suitable for:

3500 2020

Save PDF