Table of Contents
Advertisement
3.
From the Released Position, send the clamps to the
Stowed Position by pushing from the yellow bumper
upward. Listen for a "clicking" sound to confirm the
clamp has been stowed properly.
Stowed Position
CAUTION!
Make sure the Tonneau Cover clamp and clamp wire
are in the proper stowed position. If the clamp and
clamp wire are not properly stowed, damage to the
Tonneau Cover material will result.
4.
Fold the rear panel up onto the center panel
(Intermediate Position).
Folded Rear Panel (Intermediate Position)
NOTE:
The vehicle cannot be driven when the Tonneau Cover is
in this position.
5.
Fold the rear and center panels up onto the front
panel (Tri-Folded Position).
Tri-Folded Position
GETTING TO KNOW YOUR VEHICLE
Incorrect Folding — Will Cause Damage
Correct Folding — Hold Panels Together
NOTE:
When folding the center and rear panels, the
sections MUST be held together to avoid damage
to the cover material.
Fold the panels gently. It is not recommended to
allow the panels to drop under their own weight.
87
2
Advertisement
Table of Contents
