Table of Contents
Advertisement
B
D
— I
E
ED
IVIDER
F
QUIPPED
The bed divider has two functional positions:
Divider Position
Storage Position
Divider Position
The divider position is intended for managing your cargo
and assisting in keeping cargo from moving around the
bed. There are 11 divider slots along the bed inner panels
which allow for various positions to assist in managing
your cargo.
To install the bed divider into a divider position, perform
the following:
1.
Make sure the center handle is unlocked using the
vehicle key and rotate the center handle vertically to
release the divider side gates.
Center Handle And Lock
1 — Center Handle Lock
2 — Handle
3 — Unlocked Position
4 — Locked Position
2.
With the side gates open, position the divider so the
outboard ends align with the intended slots in the
sides of the bed.
GETTING TO KNOW YOUR VEHICLE
Aligning Gate To Slots
3.
Rotate the side gates closed so that the outboard
ends are secured into the intended slots of the bed.
4.
Rotate the center handle horizontally to secure the
side gates in the closed position.
Side Gates Closed
5.
Lock the center handle to secure the panel into place.
85
2
Advertisement
Table of Contents
