Table of Contents
Advertisement
356
IN CASE OF EMERGENCY
Jack Warning Label
Lug Wrench Adapter Location
See the following steps for proper jacking and tire
removal:
1.
Remove the spare wheel, jack, and tools from
storage.
2.
Using the lug wrench, loosen, but do not remove, the
wheel nuts by turning them counterclockwise one
turn while the wheel is still on the ground. Changing a
dually tire requires the lug wrench adapter.
NOTE:
If your vehicle is equipped with hub caps/wheel covers
they must be removed before raising the vehicle off the
ground
page 360.
Ú
Lug Wrench Adapter
Lug Wrench Adapter And Wrench
3.
Place the assembled jack and tools into the jacking
position.
NOTE:
Placement for the front and rear jacking locations are
critical. Keep the jack and tools aligned while raising the
vehicle to prevent tool damage. See the following images
for proper jacking locations.
Jack / Extensions Placement
Advertisement
Table of Contents
