Table of Contents
Advertisement
4.
Pull the desired bulb straight from the socket.
CHMSL Bulb And Socket
CAUTION!
Do not contaminate the bulb glass by touching it with
your fingers or by allowing it to contact other oily
surfaces. Shortened bulb life will result.
Outside Bulbs: Cargo Lamps
Inside Bulb: Center High Mounted Stop Lamp
5.
Reverse the procedure for installation of bulbs and
housing.
CAB TOP CLEARANCE LAMPS — IF EQUIPPED
See the following steps to replace:
1.
Remove the screws from the top of the lamp.
Screw Location From Clearance Lamp
2.
Rotate the bulb socket a quarter turn and pull it from
the lamp assembly.
Removing Bulb Socket From Clearance Lamp
3.
Pull the bulb straight from it's socket and replace.
SERVICING AND MAINTENANCE
REAR LAMP BAR ID MARKER (DUAL REAR
WHEELS) — IF EQUIPPED
See the following steps to replace:
1.
Loosen the two screws and the housing to gain
access to the bulb sockets.
Screw Locations
2.
Turn the socket a quarter turn counterclockwise to
access the bulb.
3.
Pull the bulb straight out from the socket.
4.
Reverse the procedure for installation of the bulbs
and housing.
415
8
Advertisement
Table of Contents
