Trailer Cameras - If Equipped; Trailer Surround View Camera System - RAM 2500 2023 Owner's Manual

196 STARTING AND OPERATING
CAUTION!
 To avoid vehicle damage, Surround View should only
be used as a parking aid. The Surround View Camera
is unable to view every obstacle or object in your
drive path.
 To avoid vehicle damage, the vehicle must be driven
slowly when using Surround View to be able to stop
in time when an obstacle is seen. It is recommended
that the driver look frequently over his/her shoulder
when using Surround View.
NOTE:
If the vehicle is not equipped with a Pickup Box:
 The bottom wedge of the Top View will be displayed in
black.
 The Rear Cross Path button will be grayed out.
 The guidelines will not be overlaid on Top View/Rear
View and Full Screen of Back Up Camera view.
 Black video will be displayed for the right side of the
Top and Rear View, and full screen of the Back Up
Camera view when the Rear View Camera is not
connected.
To access all camera options when the vehicle is in
REVERSE, select the More Cams button on the surround
view screen.
For information on Auxiliary Cameras (if equipped), see
page 199.
Ú
TRAILER CAMERAS — IF EQUIPPED
T S V
RAILER URROUND IEW
S
YSTEM
The Trailer Surround View Camera system allows you to
see an on-screen image of the surroundings and the
Top View of a trailer using four mountable cameras.
This occurs whenever the More Cams button is
selected, or when enabled through the Uconnect system.
The image will be displayed on the Uconnect display along
with a caution note "Check Entire Surroundings".
After five seconds, this note will disappear.
NOTE:
 Trailer Surround View Camera kit is only available for
vehicles equipped with the Surround View Camera
system.
 The Trailer Surround View Camera system has
programmable settings that may be selected through
the Uconnect system page 226.
Ú
Set Up
The Trailer Surround View Camera system includes an
C
installation kit with a Trailer Surround View Module and
AMERA
four Trailer Surround View Cameras that must be installed
on your trailer prior to connecting to your vehicle. See the
installation instructions included with the Trailer Surround
View installation kit for more information.
NOTE:
The trailer will be connected to the vehicle via the 12-way
connector, and the installation location varies for Conven-
tional or Gooseneck trailers.
For Conventional trailers, the connection from the rear
fascia goes to the receptacle in the bumper.
Conventional Trailer Connection
1 — Rear Fascia Connector
2 — Receptacle