Table of Contents
Advertisement
Released Position
Hold The Bumper And Push The Handle Up
8. Holding the bumper, push the fully released
latch to the center and push up. Push the
handle firmly, locking it into the stowed
position. Repeat Steps 2 & 3 for the
opposite side latch.
9. With two people, remove the cover.
T
-F
T
C
RI
OLD
ONNEAU
OVER
I
NSTALLATION
To install the Tonneau Cover follow these steps:
1. Position the Tonneau Cover on the truck
bed and center using the locating
bumpers.
2. Locate the front pair of Tonneau Cover
latches on the underside of the Cover. Slide
the locking lever toward the inside of the
truck bed and release the latch from the
stowed position, and pull the handle
downward into the released position. Do
this for both the left and right side.
Location of Front Latches
GETTING TO KNOW YOUR VEHICLE
Slide Locking Lever Towards Inside Of Truck
Unlatching Latch
101
2
Advertisement
Table of Contents
