Table of Contents
Advertisement
336
SAFETY
Can a child seat be installed in the center position using
the inner LATCH lower anchorages from the outboard
seating positions?
Can two child restraints be attached using a common
lower LATCH anchorage?
Can the rear-facing child restraint touch the back of the
front passenger seat?
Can the rear head restraints be removed?
Frequently Asked Questions About Installing Child Restraints With LATCH
N/A – Regular Cab/Mega Cab/Crew Cab Split Bench
No – Crew Cab Full Bench rear seat
No
Yes
Yes
Regular Cab Front / Crew Cab with full bench rear seat:
Use the seat belt and tether anchor to install a child seat
in the center seating position.
Crew Cab with split bench rear seat / Mega Cab: Child
restraints can be installed using the supplied lower
anchorages for the center seating position.
Never "share" a LATCH anchorage with two or more child
restraints. If the center position does not have dedicated
LATCH lower anchorages, use the seat belt to install a child
seat in the center position next to a child seat using the
LATCH anchorages in an outboard position.
The child seat may touch the back of the front passenger
seat if the child restraint manufacturer also allows
contact. See your child restraint owner's manual for more
information.
The head restraints can be removed in every rear seating
position if they interfere with the installation of the child
restraint
page 36.
Ú
Advertisement
Table of Contents
