Page 1
R A M T R U C K 2 0 1 6 1 5 0 0 / 2 5 0 0 / 3 5 0 0 O W N E R ’ S M A N U A L...
Page 2
This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
- all essentials that are traditional to our vehicles. RAM is a registered trademark of FCA US LLC. This Owner’s Manual has been prepared with the assis- HOW TO USE THIS MANUAL...
6 INTRODUCTION WARNINGS AND CAUTIONS Operating instructions for the special equipment in- stalled by the conversion/camper manufacturer should This Owner’s Manual contains WARNINGS against also be supplied with your vehicle. If these instructions operating procedures that could result in a collision, are missing, please contact your authorized dealer for bodily injury and/or death.
INTRODUCTION 7 frame and underbody as well as the Automobile Infor- VEHICLE MODIFICATIONS/ALTERATIONS mation Disclosure Label affixed to a window on your vehicle, the vehicle registration and title. WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
Page 11
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ General Information ....21 A WORD ABOUT YOUR KEYS ... . .12 ▫...
Page 12
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Sound Horn With Remote Key Lock ..28 ▫ To Exit Remote Start Mode And Drive The Vehicle ......37 ▫...
Page 13
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 OCCUPANT RESTRAINT SYSTEMS ..52 SAFETY TIPS ......118 ▫...
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses either a key start ignition system or keyless ignition system. The key start ignition system consists of a either a bladed key with an immobilizer chip in it, or a Key Fob with Remote Keyless Entry (RKE) transmitter and an Ignition Node Module (IGNM).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Keyless Push Button Ignition — If Equipped This feature allows the driver to operate the ignition switch with the push of a button as long as the Remote Keyless Entry (RKE) transmitter is in the passenger compartment.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob NOTE: When using the emergency key to gain access to your vehicle, be aware that the security alarm may be Key Fob — If Equipped triggered. Insert the Key Fob into the ignition and place The Key Fob operates the ignition switch.
Page 17
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Keyless Push Button Ignition Key Fob — If Equipped To remove the emergency key, slide the mechanical latch on the backside of the Key Fob sideways with your This Keyless Push Button Ignition Key Fob allows the thumb and then pull the key out with your other hand.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Removing Key Fob From Ignition Place the shift lever in PARK (if equipped with an automatic transmission). Turn the Key Fob to the OFF position and then remove the Key Fob. NOTE: •...
Page 19
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 • For vehicles equipped with a touchscreen radio, refer WARNING! to “Uconnect Settings” in “Understanding Your Instru- • Before exiting a vehicle, always shift the automatic ment Panel” for further information. transmission into PARK or the manual transmis- CAUTION! sion into REVERSE, apply the parking brake, turn the vehicle OFF, remove the key fob from the...
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder WARNING! (Continued) Opening the driver’s door when the Key Fob is in the • Do not leave the Key Fob in or near the vehicle, or ignition and the ignition switch position is OFF or ACC, in a location accessible to children, and do not a chime will sound to remind you to remove the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 General Information SENTRY KEY The following regulatory statement applies to all Radio The Sentry Key Immobilizer System prevents unauthor- Frequency (RF) devices equipped in this vehicle: ized vehicle operation by disabling the engine. The system does not need to be armed or activated.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A Key Fob that has not been programmed is also CAUTION! considered an invalid key. The Sentry Key Immobilizer system is not compat- During normal operation, after turning on the ignition ible with some aftermarket remote starting systems.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Customer Key Programming CAUTION! Programming Key Fobs or RKE transmitters may be • Always remove the Key Fobs from the vehicle and performed at an authorized dealer. lock all doors when leaving the vehicle unat- General Information tended.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE SECURITY ALARM To Arm The System The Vehicle Security Alarm monitors the vehicle doors Follow these steps to arm the Vehicle Security Alarm: and ignition for unauthorized operation. When the Ve- 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 same exterior zone (refer to Keyless Enter- N-Go in 1. Push the UNLOCK button on the Remote Keyless Things To Know Before Starting Your Vehicle for Entry (RKE) transmitter. further information). 2. Grasp the Passive Entry Unlock Door Handle with a •...
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE system will give you a false alarm. If one of the previ- ILLUMINATED APPROACH ously described arming sequences has occurred, the The courtesy lights will turn on when you use the Vehicle Security Alarm will arm regardless of whether Remote Keyless Entry (RKE) transmitter to unlock the you are in the vehicle or not.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 The illuminated entry system will not operate if the REMOTE KEYLESS ENTRY (RKE) dimmer control is in the “Dome OFF” position (rotate The RKE system allows you to lock or unlock all doors, horizontal thumb wheel on the bottom of the switch to tailgate, and the RamBox (if equipped) as well as activate the far left detent position).
Page 28
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Push and release the LOCK button on the RKE transmit- ter to lock all doors, the tailgate and the RamBox (if equipped). The turn signal lights will flash and the horn will chirp to acknowledge the signal. NOTE: Inserting the Key Fob with RKE transmitter into the ignition switch disables the system from responding to any button pushes from that RKE transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. NOTE: The EVIC/DID or Uconnect Settings are setup for driver door first, otherwise this will unlock all doors. Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver’s door or all doors on the first push of the...
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with a touchscreen radio, refer NOTE: Pushing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle to “Uconnect Settings” in “Understanding Your Instru- Security Alarm System.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 (EVIC)/Settings (Customer-Programmable Features)” the headlights will turn on, the park lights will flash, the in “Understanding Your Instrument Panel” for further horn will pulse on and off, and the turn signal lights will information.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE RKE Air Suspension (Remote Lowering Of The Cancelling Remote Lowering Vehicle) — If Equipped Vehicle lowering can be cancelled at anytime. When vehicle lowering is cancelled, the vehicle will raise up to For easy entry and loading, your vehicle can be the next defined level and lock out the remote lowering lowered by pushing the Key Fob air suspension...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Transmitter Battery Replacement The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board.
Page 34
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Emergency Key Removal Remove Screw From Transmitter Case 2. Separating RKE halves requires screw removal – if equipped, and gently prying the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal.
Page 35
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Separating Transmitter Case Separating Transmitter Case 3. Remove the battery by turning the back cover over (battery facing downward) and tapping it lightly on a solid surface such as a table or similar, then replace the battery.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE new battery with your fingers. Skin oils may cause NOTE: Changes or modifications not expressly approved battery deterioration. If you touch a battery, clean it by the party responsible for compliance could void the with rubbing alcohol.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • Fuel meets minimum requirement How To Use Remote Start • System not disabled from previous remote start event All of the following conditions must be met before the engine will remote start: •...
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message horn will chirp twice (if programmed). Once the vehicle has started, the engine will run for 15 minutes. The following messages will display in the EVIC/DID if the vehicle fails to remote start or exits remote start NOTE: prematurely: •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 the ignition switch must be cycled to the ON/RUN Remote Start Comfort Systems — If Equipped position before you can repeat the start sequence for a When Remote Start is activated, the heated steering third cycle.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information DOOR LOCKS The following regulatory statement applies to all Radio Manual Door Locks Frequency (RF) devices equipped in this vehicle: Front and rear doors may be locked by moving the lock This device complies with Part 15 of the FCC Rules and knob down or unlocked by moving the lock knob up.
Page 41
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Front doors may be opened with the inside door handle WARNING! (Continued) without lifting the lock knob. • Before exiting a vehicle, always shift the automatic Doors locked before closing will remain locked when transmission into PARK or the manual transmis- closed.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode.
Page 43
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 operate. A chime will sound if the Key Fob is in the Automatic Doors Unlock Programming — If ignition switch and a door is open, as a reminder to Equipped remove the Key Fob. The Automatic Doors Unlock feature can be enabled or disabled as follows: Automatic Door Locks —...
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child-Protection Door Lock To use the system, open each rear door, use a flat blade screwdriver (or emergency key) and rotate the dial to To provide a safer environment for children riding in the engage and disengage the Child-Protection locks.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 KEYLESS ENTER-N-GO WARNING! The Passive Entry system is an enhancement to the Avoid trapping anyone in a vehicle in a collision. vehicle’s Remote Keyless Entry (RKE) system and a Remember that the rear doors can only be opened feature of Keyless Enter-N-Go.
Page 46
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the vehicle is unlocked by Passive Entry and no door is opened within 60 seconds, the vehicle will re-lock and if equipped will arm the security alarm. • The vehicles security alarm can be armed/disarmed by pushing the passive entry key fob lock/unlock buttons (if equipped).
Page 47
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 To Unlock From The Passenger Side: Passive Entry system is equipped with an automatic door unlock feature which will function if the ignition switch With a valid Passive Entry RKE transmitter within 5 ft is in the OFF position.
Page 48
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Vehicle’s Doors: Do NOT grab the door handle when pushing the door handle lock button. This could unlock the door(s). With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle LOCK button to lock all doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 NOTE: General Information • After pushing the door handle LOCK button, you The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle: must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS the front passenger door for passenger window control and on the rear doors of the Quad Cab and Crew Cab Power Windows — If Equipped models. The windows will operate when the ignition switch is turned to the ON/RUN or ACC position, and for up to 10 minutes after the ignition is turned OFF or until a front door is opened.
Page 51
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Auto-Up Feature With Anti-Pinch Protection WARNING! (Continued) (4-Door Models Driver And Front Passenger Door particularly unattended children, can become en- Only) — If Equipped trapped by the windows while operating the power Lift the window switch fully upward to the second window switches.
Page 52
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the window runs into any obstacle during the Reset Auto-Up auto-closure, it will reverse direction and then go back Should the Auto Up feature stop working, the window down. Remove the obstacle and use the window switch may need to be reset.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Window LOCKOUT Switch (4–Door Models Only) The window LOCKOUT switch on the driver’s door allows you to disable the window control on the rear passenger doors. To disable the window controls on the rear passenger doors, push the window LOCK button into the latched or down position.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- Important Safety Precautions rence and can be minimized. If the buffeting occurs with Please pay close attention to the information in this the rear windows open, then open the front and rear section.
Page 55
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 restraints or belt-positioning booster seats. Older chil- side air bags will inflate forcefully into the space dren who do not use child restraints or belt- between occupants and the door and occupants could positioning booster seats should ride properly buckled be injured.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Systems their seat belts. The Belt Alert feature is active when- ever the ignition switch is in the START or ON/RUN Buckle up even though you are an excellent driver, even position.
Page 57
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 BeltAlert Warning Sequence Change Of Status The BeltAlert warning sequence is activated when the If the driver or outboard front seat passenger (if vehicle is moving above a specified vehicle speed range equipped with outboard front passenger seat BeltAlert) and the driver or outboard front seat passenger is un- unbuckles their seat belt while the vehicle is traveling,...
Page 58
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If BeltAlert has been deactivated and the driver WARNING! or outboard front seat passenger (if equipped with out- • Relying on the air bags alone could lead to more board front passenger seat BeltAlert) is unbuckled the Seat Belt Reminder Light will turn on and remain on until severe injuries in a collision.
Page 59
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat injury in a collision.
Page 60
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A shoulder belt placed behind you will not protect properly. In a sudden stop, you could move too far you from injury during a collision.
Page 61
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear seat (for vehicles equipped with a rear seat).
Page 62
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low 5. Position the shoulder belt across the shoulder and across your hips, below your abdomen. To remove chest with minimal, if any slack so that it is comfort- slack in the lap belt portion, pull up on the shoulder able and not resting on your neck.
Page 63
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 6. To release the seat belt, push the red button on the 3. Slide the latch plate upward over the folded webbing. buckle. The seat belt will automatically retract to its The folded webbing must enter the slot at the top of stowed position.
Page 64
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release but- ton.
Page 65
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 1. Remove the mini-latch plate and regular latch plate from its stowed position on the seat. In Use Position 2. Grasp the mini-latch plate and pull the seat belt over the seat. Inserting Latch Plate 3.
Page 66
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. When the seat belt is long enough to fit, insert the 8. Position the shoulder belt on your chest so that it is mini-latch plate into the mini-buckle until you hear a comfortable and not resting on your neck.
Page 67
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 WARNING! (Continued) proper restraint and will increase the risk of injury in a collision. • When reattaching the mini-latch plate and mini- buckle, ensure the seat belt webbing is not twisted. If the webbing is twisted, follow the preceding procedure to detach the mini-latch plate and mini- buckle, untwist the webbing, and reattach the mini-latch plate and mini-buckle.
Page 68
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove slack, pull the loose end of the webbing. Wear WARNING! the lap belt snug against the hips. Sit back and upright in • ONLY use a Seat Belt Extender if it is physically the seat, then adjust the seat belt as tightly as is comfort- able.
Page 69
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Seat Belts And Pregnant Women Position the lap belt snug and low below the abdomen and across the strong bones of the hips. Place the shoulder belt across the chest and away from the neck. Never place the shoulder belt behind the back or under the arm.
Page 70
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The pretensioners are triggered by the Occupant Re- For additional information, refer to “Installing Child straint Controller (ORC). Like the air bags, the preten- Restraints Using The Vehicle Seat Belt” under the “Child sioners are single use items.
Page 71
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 sound as the seat belt retracts. Allow the webbing to retract completely in this case and then carefully pull out only the amount of webbing necessary to comfortably wrap around the occupant’s mid-section. Slide the latch plate into the buckle until you hear a click.
Page 72
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Mode and activate the vehicle sensitive (emergency) WARNING! (Continued) locking mode. 12 years or younger, including a child in a rear- facing child restraint. WARNING! • Only use a rear-facing child restraint in a vehicle •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 • Front and Side Impact Sensors — If Equipped Supplemental Restraint System (SRS) • Seat Belt Pretensioners Air Bag System Components • Seat Belt Buckle Switch Your vehicle may be equipped with the following air bag system components: Advanced Front Air Bags •...
Page 74
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 75
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Advanced Front Air Bag Features WARNING! The Advanced Front Air Bag system has multistage • No objects should be placed over or near the air driver and front passenger air bags. This system provides bag on the instrument panel or steering wheel output appropriate to the severity and type of collision as because any such objects could cause harm if the...
Page 76
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because air bag sensors measure vehicle deceleration WARNING! (Continued) over time, vehicle speed and damage by themselves are some collisions, air bags won’t deploy at all. Al- not good indicators of whether or not an air bag should ways wear your seat belts even though you have air have deployed.
Page 77
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Knee Impact Bolsters SABs are marked with a “SRS AIRBAG” or “AIR- BAG” label sewn into the outboard side of the seats. The Knee Impact Bolsters help protect the knees of the driver and front passenger, and position the front occu- pants for improved interaction with the Advanced Front Air Bags.
Page 78
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the SAB deploys, it opens the seam on the out- 2. Supplemental Side Air Bag Inflatable Curtains board side of the seatback’s trim cover. The inflating SAB (SABICs): Located above the side windows. The trim deploys through the seat seam into the space between the covering the SABICs is labeled “SRS AIRBAG”...
Page 79
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 SABICs may help reduce the risk of head or other injuries WARNING! to front and rear seat outboard occupants in certain side • Your vehicle is equipped with left and right impacts and/or vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and Supplemental Side Air Bag Inflatable Curtains body structure.
Page 80
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to help keep you in position, away from inflating Side Air activate in certain side impacts and certain rollover Bags. To get the best protection from the Side Air Bags, events.
Page 81
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 The Side Air Bags will not deploy in all side collisions, WARNING! (Continued) including some collisions at certain angles, or some side properly. In some collisions, Side Air Bags won’t collisions that do not impact the area of the passenger deploy at all.
Page 82
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE faster-developing event may deploy the seat belt preten- deploy and unfold. The abrasions are similar to fric- sioners as well as the Side Air Bags on both sides of the tion rope burns or those you might get sliding along a vehicle.
Page 83
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Do not drive your vehicle after the air bags have de- Enhanced Accident Response System ployed. If you are involved in another collision, the air In the event of an impact, if the communication network bags will not be in place to protect you.
Page 84
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System Reset the OFF position or in the ACC position, the air bag Procedure system is not on and the air bags will not inflate. In order to reset the Enhanced Accident Response System The ORC contains a backup power supply system that functions after an event, the ignition switch must be may deploy the air bags even if the battery loses power or...
Page 85
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 While the air bag system is designed to be maintenance WARNING! free, if any of the following occurs, have an authorized dealer service the air bag system immediately. Ignoring the Air Bag Warning Light in your instru- ment panel could mean you won’t have the air bags •...
Page 86
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) authorized dealer. Only manufacturer approved wiring, including adding any kind of badges or seat accessories may be used. If it is necessary to stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 • Whether or not the driver and passenger safety belts In addition to the vehicle manufacturer, other parties, were buckled/fastened; such as law enforcement, that have the special equip- ment, can read the information if they have access to the •...
Page 88
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Before buying any restraint system, make sure that it has WARNING! a label certifying that it meets all applicable Safety Standards. You should also make sure that you can install In a collision, an unrestrained child can become a it in the vehicle where you will use it.
Page 89
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Children who are two years old or Either an Infant Carrier or a Convertible Toddlers younger and who have not reached the Child Restraint, facing rearward in the rear...
Page 90
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints WARNING! Safety experts recommend that children ride rear-facing • Never place a rear-facing child restraint in front of in the vehicle until they are two years old or until they an air bag.
Page 91
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Older Children And Child Restraints WARNING! Children who are two years old or who have outgrown Do not install a rear-facing car seat using a rear support their rear-facing convertible child seat can ride forward- leg in this vehicle.
Page 92
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • When your child restraint is not in use, secure it in • Improper installation can lead to failure of an the vehicle with the seat belt or LATCH anchor- infant or child restraint.
Page 93
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 2. Do the child’s knees bend comfortably over the front position. If the shoulder belt contacts the face or neck, of the vehicle seat – while they are still sitting all the move the child closer to the center of the vehicle, or use way back? a booster seat to position the seat belt on the child...
Page 94
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 95
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Lower Anchors And Tethers For CHildren Your vehicle is equipped with the child restraint anchor- (LATCH) Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 96
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Quad Cab/Crew Cab/Mega Cab 60/40 Split Bench • Lower Anchorage Symbol - 2 anchorages per seating position Regular Cab • Lower Anchorage Symbol – 2 anchorages per •...
Page 97
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Quad Cab/Crew Cab Full Bench • Lower Anchorage Symbol 2 anchorages per seating position • Top Tether Anchorage Symbol...
Page 98
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system weight + weight of the child re- until the combined weight of the straint) for using the LATCH an- child and the child restraint is chorage system to attach the child...
Page 99
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Frequently Asked Questions About Installing Child Restraints With LATCH Can two child restraints be at- Never “share” a LATCH anchorage tached using a common lower with two or more child restraints. LATCH anchorage? If the center position does not have dedicated LATCH lower anchor- ages, use the seat belt to install a...
Page 100
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 101
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Quad Cab, Mega Cab and Crew Cab models have tether strap anchorages located behind each of the rear seats. Mega Cab Tether Anchorages (Behind Covers) LATCH-compatible child restraint systems will be Regular Cab Tether Anchorages equipped with a rigid bar or a flexible strap on each side.
Page 102
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether strap. The tether strap will have a hook at the end Center Seat LATCH — Quad Cab/Mega Cab/Crew to attach to the top tether anchorage and a way to tighten Cab Split Bench the strap after it is attached to the anchorage.
Page 103
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 To Install A LATCH-Compatible Child Restraint 3. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seat- If the selected seating position has a Switchable Auto- ing position.
Page 104
102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Stow An Unused ALR Seat Belt: WARNING! When using the LATCH attaching system to install a • Improper installation of a child restraint to the child restraint, stow all ALR seat belts that are not being LATCH anchorages can lead to failure of the re- used by other occupants or being used to secure child straint.
Page 105
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Installing Child Restraints Using The Vehicle Seat webbing out of the retractor and then letting the webbing Belt retract back into the retractor. If it is locked, the ALR will make a clicking noise while the webbing is pulled back The seat belts in the passenger seating positions are into the retractor.
Page 106
104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle Quad Cab/Mega Cab/Crew Cab • ALR = Switchable Automatic Locking Retractor Regular Cab • Cinch = Cinching Latch Plate • ALR = Switchable Automatic Locking Retractor •...
Page 107
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 Lap/Shoulder Belt Systems Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using weight of the child restraint) for using the Child Restraint the seat belt to install a forward facing...
Page 108
106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 109
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 strap. See the section “Installing Child Restraints rear-most position to make room for the child seat. Using the Top Tether Anchorage” for directions to You may also move the front seat forward to allow attach a tether anchor.
Page 110
108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. See the section “Installing Child Restraints If the belt still cannot be tightened after you shorten the Using the Top Tether Anchorage” for directions to buckle, disconnect the latch plate from the buckle, turn attach a tether anchor.
Page 111
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 Regular and Mega Cab Trucks: WARNING! (Continued) In the regular cab truck, the top tether anchorages are (LATCH) Restraint System” for the location of ap- located behind the center and right passenger seats. In proved tether anchorages in your vehicle.
Page 112
110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Route the tether strap to provide the most direct path between the anchorage and the child seat. The tether strap should go between the head restraint posts underneath the head restraint. You may need to adjust the head restraint to the upward position to pass the tether strap underneath the head restraint and be- tween its posts.
Page 113
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 WARNING! Never place a rear-facing child restraint in front of an air bag. A deploying Passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years or younger, including a child in a rear-facing child restraint.
Page 114
112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Right or Left Outboard Seats: 1. Raise the head restraint and reach between the rear seat and rear glass to access the tether strap loop. Tether Strap Loop With Center Head Restraint In Raised Position 2.
Page 115
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 3. Pass the tether strap hook under the head restraint 4. Attach the hook to the center tether strap loop (see behind the child seat, though the tether strap loop diagram). Tighten the tether strap according to the behind the seat and over to the center tether strap child seat manufacturer’s instructions.
Page 116
114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If there are child seats in both of the outboard (left and right) seating positions, the tether strap hooks of both child seats should be connected to the center tether strap loop. This is the correct way to tether two outboard child seats.
Page 117
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 3. Pass the tether strap hook under the head restraint 4. Attach the hook to the outboard tether strap loop (see behind the child seat, though the tether strap loop diagram). Tighten the tether strap according to the behind the seat and over to the right or left outboard child seat manufacturer’s instructions.
Page 118
116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Three Child Restraints: 1. Place a child restraint on each outboard rear seat. Route the tether straps following the directions for right and left seating positions, above. 2. Attach both hooks to the center tether strap loop, but do not tighten the straps yet.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 ENGINE BREAK-IN RECOMMENDATIONS WARNING! (Continued) A long break-in period is not required for the engine and behind the child seat to secure a child restraint top drivetrain (transmission and axle) in your vehicle. tether strap.
118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! • Do not leave children or animals inside parked Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 119 Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
120 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The have the system inspected at an authorized dealer as Vehicle soon as possible. This light will illuminate with a single chime when a fault with the Air Bag Warning Seat Belts Light has been detected, it will stay on until the fault Inspect the seat belt system periodically, checking for...
Page 123
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 121 unobstructed and that are firmly secured so that they WARNING! (Continued) cannot slip out of position and interfere with the pedals mats and other coverings will reduce the size of the or impair safe operation of your vehicle in other ways. pedal area and interfere with the pedals.
122 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for proper closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Power Mirrors — If Equipped ... .142 MIRRORS ......130 ▫...
Page 126
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Passenger’s Power Seat — If Equipped ..149 ▫ Easy Entry/Exit Seat ....167 ▫...
Page 127
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 ▫ Lights-On Reminder ....177 ▫ Windshield Washers ....183 ▫...
Page 128
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Accelerate For Passing ....193 ▫ ParkSense Warning Display ....204 ▫...
Page 129
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 ▫ Programming A Non-Rolling Code ..221 ▫ Sunshade Operation....229 ▫...
Page 130
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Manual Sliding Rear Window — If Equipped .249 STORAGE ......239 ▫...
Page 131
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 ▫ Camper Applications ....271 TRI-FOLD TONNEAU COVER — IF EQUIPPED ......274 EASY-OFF TAILGATE .
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Automatic Dimming Mirror — If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you.
Page 134
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ASSIST Call WARNING! The ASSIST Button is used to automatically connect you ALWAYS obey traffic laws and pay attention to the to any one of the following support centers: road. Some Uconnect Access services, including 9-1-1 •...
Page 135
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 9-1-1 Call 3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit 1. Push the 9-1-1 Call button on the Rearview Mirror. the following important vehicle information to a 9-1-1 NOTE: In case the 9-1-1 Call button is pushed in error, operator: there will be a 10 second delay before the 9-1-1 Call...
Page 136
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! • Your vehicle may be transmitting data as authorized • If anyone in the vehicle could be in danger (e.g., by the subscriber. fire or smoke is visible, dangerous road conditions •...
Page 137
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 9-1-1 Call System Limitations WARNING! (Continued) Vehicles sold in Canada and Mexico DO NOT have 9-1-1 electrical equipment to the vehicle’s electrical sys- Call system capabilities. tem. This may prevent your vehicle from sending a signal to initiate an emergency call.
Page 138
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The vehicle’s electrical systems are not intact. WARNING! • The 9-1-1 Call system software and/or hardware are • Ignoring the Rearview Mirror light could mean you damaged during a crash. will not have 9-1-1 Call services. If the Rearview •...
Page 139
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 General Information WARNING! This device complies with Part 15 of the FCC Rules. ALWAYS obey traffic laws and pay attention to the Operation is subject to the following two conditions: (1) road. Some Uconnect Access services, including 9-1-1 This device may not cause harmful interference, and (2) and Assist, will NOT work without an operable 1X this device must accept any interference received, includ-...
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror With Rear View Camera Display — If Equipped A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: If your vehicle is equipped with illuminated Outside Mirrors Folding Feature approach lights under the outside mirrors they can be All outside mirrors are designed to be able to be manu- turned off through the instrument cluster or the Uconnect ally folded both forward and rearward to prevent dam- radio.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If your vehicle is equipped with a touchscreen, this CAUTION! feature can be programmed through the Uconnect sys- tem. Refer to “Uconnect Settings” in “Understanding It is recommended to fold the mirrors into the full Your Instrument Panel”...
Page 143
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right). Push the switch once and the mirrors will fold in, push the switch a second time and the mirrors will return to the normal driving position.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Resetting the Power Folding Outside Mirrors NOTE: • The power fold mirrors are designed to operate while You may need to reset the power folding mirrors if the following occurs: the vehicle is stationary or traveling at moderate speeds.
Page 145
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Power Mirror Controls Location Power Mirror Controls The power mirror controls consist of mirror select but- 1 — Mirror Select Buttons tons and a four-way mirror control switch. 2 — Four-Way Mirror Control Switch To adjust a mirror, push either the L (left) or R (right) button to select the mirror that you want to adjust.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using the mirror control switch, push on any of the four Heated Mirrors — If Equipped arrows for the direction that you want the mirror to move. These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster (if equipped).
Page 147
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 extra-wide loads. To change position inboard or out- A small blindspot mirror is located next to main mirror board, the mirror head should be rotated (flipped in or and can be adjusted separately. out).
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirror — If Equipped “Slide-On-Rod” Features Of Sun Visor — If Equipped Illuminated vanity mirrors are located on each sun visor. To use the mirror, rotate the sun visor down and swing The sun visor “Slide-On-Rod”...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
Page 150
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 the seat will move in the direction of the switch. Release WARNING! (Continued) the switch when the desired position is reached. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious CAUTION! injury or death could result from a poorly adjusted Do not place any article under a power seat or...
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward. The seat will move in the direction of the switch. Release the switch when the desired position has been reached.
Page 153
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 If your vehicle is equipped with a touchscreen, the front WARNING! heated seats control buttons are also located within the • Persons who are unable to feel pain to the skin climate or controls screen of the touchscreen. because of advanced age, chronic illness, diabetes, •...
Page 154
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE time, the display will change from HI to LO, indicating Center (EVIC)” or “Driver Information Display (DID)” in the change. The LO-level setting will turn OFF automati- “Understanding Your Instrument Panel” for further in- cally after approximately 45 minutes.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 NOTE: through fine perforations in the seat cover to help keep the driver and front passenger cooler in higher ambient • Once a heat setting is selected, heat will be felt within temperatures. The fans operate at two speeds, HI and LO. two to five minutes.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicles Equipped With Remote Start Manual Seat Adjuster — If Equipped On models that are equipped with remote start, the Both front seats are adjustable forward or rearward. The ventilated seats can be programmed to come on during a manual seat adjustment handle is located under the seat remote start.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 have reached the desired position. Then, using body “dump” feature allows access to the storage bin behind pressure, move forward and rearward on the seat to be the seat. sure that the seat adjusters have latched. WARNING! WARNING! •...
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mega Cab Rear Seat Features Reclining Rear Seats — If Equipped The recliner handle is located on the outside of the seat cushion. To adjust the seatback, lift upward on the handle, lean back on the seatback and when you reach the desired position, release the handle.
Page 159
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Folding Rear Seat (Table Mode) — If Equipped 2. Fold the seatback forward. Both the left and right rear seatbacks can be folded down and used as a table. To fold down either rear seatback: 1.
Page 160
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat — If Equipped WARNING! (Continued) Both the outboard rear seats will drop and move forward • Do not allow people to ride in any area of your when the seatback is folded flat. vehicle that is not equipped with seats and seat belts.
Page 161
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 To fold either rear seat flat: 2. Fold the seatback down and push the seat forward. 1. Lift the handle, located on the outboard side of either of the rear seats. Rear Passenger Fold-Flat Seats 3.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) vehicle or occupying a seat. Head restraints should An improperly latched seat could cause serious in- never be adjusted while the vehicle is in motion. jury or death. Make sure that the seatback is securely Driving a vehicle with the head restraints improperly locked into position.
Page 163
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 WARNING! • A loose head restraint thrown forward in a colli- sion or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment.
Page 164
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Head Restraints WARNING! The rear seats are equipped with adjustable and remov- A loose head restraint thrown forward in a collision able head restraints. To raise the head restraint, pull or hard stop could cause serious injury or death to upward on the head restraint.
Page 165
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 NOTE: • The rear center head restraint (Crew Cab and Quad Cab) has only one adjustment position that is used to aid in the routing of a tether. Refer to “Occupant Restraints” in “Things to Know Before Starting Your Vehicle”...
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat, side mirrors, adjustable pedals (if equipped) and a set of desired radio station presets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 2. Adjust all memory profile settings to desired prefer- Linking And Unlinking The Remote Keyless Entry ences (seat, side mirrors, adjustable pedals and radio Transmitter To Memory station presets). Your RKE transmitters can be programmed to recall one of two pre-programmed memory profiles by pushing the 3.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE “Driver Information Display (DID)” in “Understand- NOTE: Your RKE transmitters can be unlinked to your ing Your Instrument Panel” for further information. memory settings by pushing the SET (S) button, and within 10 seconds, followed by pushing the UNLOCK To program your RKE transmitters, perform the follow- button on the RKE transmitter.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Driver One Memory Position Recall cancelled, the driver’s seat, and the power pedals (if equipped) stop moving. A delay of one second will occur • To recall the memory settings for driver one using the before another recall can be selected.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE of the rear stop. The seat will return to its previously Each stored memory setting will have an associated Easy set position when you place the ignition into the ACC Entry and Easy Exit position. or RUN position.
Page 171
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Hood Release Safety Latch Location (1500 Series Shown) 2. Reach into the opening beneath the center of the hood CAUTION! and push the safety latch lever to the left to release it, before raising the hood.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 To minimize the possibility of scratching the lenses and Headlights reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- To turn on the headlights, rotate the headlight lowed by rinsing.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running before the head- lights will turn on in the Automatic Mode. Headlights On With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Center (EVIC)” or “Driver Information Display (DID)” in when the ignition is turned OFF while the headlight “Understanding Your Instrument Panel” for further in- switch is on, and then the headlight switch is cycled off. formation.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic High Beam Headlamp Control — If turned on or off using the Electronic Vehicle Informa- Equipped tion Center (EVIC) or Driver Information Display (DID). Refer to “Electronic Vehicle Information Center The Automatic High Beam Headlamp Control system (EVIC)”...
Page 177
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 If the windshield or Automatic High Beam Headlamp 2. Turn the headlight switch to the AUTO headlight Control mirror is replaced, the mirror must be re-aimed position. to ensure proper performance. See your local authorized 3.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Parking Lights And Panel Lights To turn on the parking lights and instrument panel lights, rotate the headlight switch clockwise. To turn off the parking lights, rotate the headlight switch back to the O (Off) position. Fog Lights —...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 turn off when the switch is pushed a second time, when If the headlights remain on while the ignition is cycled the headlight switch is rotated to the off position, or the OFF, the exterior lights will automatically turn off after high beam is selected.
Page 180
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The brightness of the instrument panel as well as the ambient lighting can be regulated by rotating the dimmer control right (brighter) or left (dimmer). When the head- lights are on you can supplement the brightness of the odometer, trip odometer, radio and overhead console by rotating the control to the right until you hear a click.
Page 181
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pushing on the corresponding lens. Rear Passenger Courtesy/Reading Light NOTE: The courtesy/reading lights will remain on until the switch is pushed a second time, so be sure they have been turned off before leaving the vehicle.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ambient Light Cargo Light With Bed Lights — If Equipped The overhead console is equipped with an ambient light The cargo light and bed lights (if equipped) are turned on feature. This light casts illumination for improved visibil- by pushing on the cargo lights button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 The cargo light and bed lights (if equipped) will also turn on for approximately 60 seconds when a RKE transmitter UNLOCK button is pushed, as part of the Illuminated Entry feature. Multifunction Lever The multifunction lever is located on the left side of the steering column.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Flash-To-Pass You can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer- ing wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Intermittent Wiper System The intermittent feature of this system was designed for use when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. For maximum delay between cycles, rotate the control knob into the upper end of the delay range.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the washer knob is depressed while in the delay range, WARNING! (Continued) the wiper will operate for several seconds after the the windshield during freezing weather, warm the washer knob is released. It will then resume the intermit- windshield with the defroster before and during tent interval previously selected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Rain Sensing Wipers — If Equipped The sensitivity of the system can be adjusted with the multifunction lever. Wiper delay position 1 is the least This feature senses moisture on the windshield and sensitive, and wiper delay position 5 is the most sensi- automatically activates the wipers for the driver.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Rain Sensing system has protection features for the placed the ignition switch in the RUN position, rain wiper blades and arms, and will not operate under the sensing wiper operation can resume, if it has been following conditions: selected, and no other inhibit conditions (mentioned previously) exist.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 WARNING! (Continued) the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. HEATED STEERING WHEEL — IF EQUIPPED The steering wheel contains a heating element that helps warm your hands in cold weather.
Page 190
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If your vehicle is equipped with a touchscreen, the heated If your vehicle is equipped with a touchscreen, this steering wheel control button is located within the cli- feature can be programmed through the Uconnect sys- mate or controls screen of the touchscreen.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 WARNING! (Continued) care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE (DID) if the pedals are attempted to be adjusted when CAUTION! the system is locked out (“Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Do not place any article under the adjustable pedals Disabled —...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 The Electronic Speed Control buttons are located on the NOTE: In order to ensure proper operation, the Elec- right side of the steering wheel. tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL Leaving the Electronic Speed Control system on button, or normal brake pressure while slowing the when not in use is dangerous. You could accidentally vehicle will deactivate the Electronic Speed Control with- set the system or cause it to go faster than you want.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 The drivers preferred units can be selected through the Using Electronic Speed Control On Hills instrument panel settings if equipped. Refer to “Under- The transmission may downshift on hills to maintain the standing Your Instrument Panel” for more information. vehicle set speed.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKSENSE REAR PARK ASSIST — IF Display (DID) indicating the vehicle speed is too fast. The EQUIPPED system will become active again if the vehicle speed is decreased to speeds less than approximately 6 mph The ParkSense Rear Park Assist system provides visual (9 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Information Center (EVIC) or Driver Information Display ParkSense Display (DID) Settings” in Understanding Your Instrument When the vehicle is in REVERSE, the warning display Panel” for further information. will turn ON indicating the system status. The ParkSense Warning screen will only be displayed if The system will indicate a detected obstacle by showing Sound and Display is selected.
Page 198
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Single 1/2 Second Tone Slow Tone...
Page 199
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Fast Tone Continuous Tone...
Page 200
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Adjustable Chime Volume Settings Enabling And Disabling ParkSense The Rear chime volume settings are programmable. ParkSense can be enabled and disabled with the ParkSense switch. • If your vehicle is equipped with a touchscreen, the When the ParkSense switch is pushed to dis- settings may be programmed through the Uconnect able the system, the instrument cluster will...
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense switch LED will be ON when ParkSense is When the gear selector is moved to REVERSE and the disabled or defective. The ParkSense switch LED will be system has detected a faulted condition, the EVIC/DID OFF when the system is enabled.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 • When you move the gear selector to the REVERSE Cleaning The ParkSense System position and ParkSense is turned off, the instrument Clean the ParkSense sensors with water, car wash soap cluster will display PARKSENSE OFF message for as and a soft cloth.
Page 204
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system misinterpreting a close obstacle as a sensor CAUTION! (Continued) problem, causing the PARKSENSE UNAVAILABLE • The vehicle must be driven slowly when using SERVICE REQUIRED message to be displayed in the ParkSense in order to be able to stop in time when instrument cluster.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 up or moving forward, e.g. during a parking maneuver. WARNING! (Continued) Refer to ParkSense System Usage Precautions for limita- • Before using ParkSense, it is strongly recom- tions of this system and recommendations. mended that the ball mount and hitch ball assem- ParkSense will retain the last system state (enabled or bly is disconnected from the vehicle when the...
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense Sensors ParkSense Warning Display The four ParkSense sensors, located in the rear fascia/ The ParkSense Warning screen is located within the bumper, monitor the area behind the vehicle that is Electronic Vehicle Information Center (EVIC) or Driver within the sensors’...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 If your vehicle is not equipped with a touchscreen, this The system will indicate a detected obstacle by showing feature can be programmed through the Electronic Ve- a single arc in the left and/or right rear regions based on hicle Information Center (EVIC) or Driver Information the obstacle’s distance and location relative to the vehicle.
Page 208
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Front Park Assist Audible Alerts Center (EVIC)” or “Driver Information Display (DID)” in “Understanding Your Instrument Panel” for further infor- ParkSense will turn off the Front Park Assist audible alert mation. (chime) after approximately three seconds when an ob- stacle has been detected, the vehicle is stationary, and Enabling And Disabling Front And/Or Rear brake pedal is applied.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the gear selector is moved to REVERSE and the Service The ParkSense Park Assist System Front or Rear system is disabled, the EVIC/DID will During vehicle start up, when the ParkSense System has display the FRONT PARKSENSE OFF REAR...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 displayed with UNAVAILABLE at either the front or clear of snow, ice, mud, dirt or other obstruction and then rear sensor location depending on where the fault is cycle the ignition. If the message continues to appear see detected.
Page 212
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Jackhammers, large trucks, and other vibrations could • Clean the ParkSense sensors regularly, taking care not affect the performance of ParkSense. to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. •...
Page 213
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 • On vehicles equipped with a tailgate, ParkSense WARNING! should be disabled when the tailgate is in the lowered • Drivers must be careful when backing up even or open position. A lowered tailgate could provide a false indication that an obstacle is behind the vehicle.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkView camera is located to the left of the tailgate WARNING! (Continued) handle. could detect the ball mount and hitch ball assem- When the vehicle is shifted out of REVERSE (with camera bly, depending on its size and shape, giving a false delay turned OFF), the rear camera mode is exited and indication that an obstacle is behind the vehicle.
Page 215
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 NOTE: If the vehicle speed remains below 8 mph projected backup path based on the steering wheel (13 km/h), the Rear View camera image will be displayed position. The active guide lines will show separate zones continuously until deactivated via.
Page 216
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! (Continued) check for pedestrians, animals, other vehicles, ob- • To avoid vehicle damage, ParkView should only be structions, or blind spots before backing up. You are used as a parking aid. The ParkView camera is responsible for the safety of your surroundings and unable to view every obstacle or object in your must continue to pay attention while backing up.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 NOTE: Once initiated by the Backup Camera button, the Rear View Camera image may be deactivated by pressing the X soft button. On deactivation, the previ- ous selected screen will appear. OVERHEAD CONSOLE — IF EQUIPPED The overhead console is located on the headliner above the review mirror.
Page 218
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pushing on the corresponding lens. Rear Passenger Courtesy/Reading Light NOTE: The courtesy/reading lights will remain on until the switch is pushed a second time, so be sure they have been turned off before leaving the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The HomeLink unit is powered by your vehicles 12 Volt battery.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Only use this transceiver with a garage door WARNING! opener that has a “stop and reverse” feature as required • Your motorized door or gate will open and close by federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 To erase the channels place the ignition in the ON/RUN Programming A Rolling Code position and push and hold the two outside HomeLink For programming garage door openers that were manu- buttons (I and III) for up to 20 seconds. The Electronic factured after 1995.
Page 222
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand - held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program. 3. Push and hold the HomeLink button you want to program while you push and hold the hand - held transmitter button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 attached to the garage door opener/device motor. Reprogramming A Single HomeLink Button Firmly push and release the “LEARN” or “TRAIN- (Rolling Code) ING” button. On some garage door openers/devices To reprogram a channel that has been previously trained, there may be a light that blinks when the garage door follow these steps: opener/device is in the LEARN/TRAIN mode.
Page 224
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand - held transmitter 1 to 3 inches 5. Push and hold the programmed HomeLink button. (3 to 8 cm) away from the HomeLink button you wish The EVIC/DID will display “CHANNEL # TRANS- to program.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 3. Without releasing the button proceed with “Program- For vehicle’s equipped with Keyless Enter-N-Go, place ming A Non-Rolling Code” step 2 and follow all the ignition in the RUN position with the Engine ON. remaining steps.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Push and hold the programmed HomeLink button. 3. Without releasing button proceed with The EVIC/DID will display “CHANNEL # TRANS- “Canadian/Gate Operator Programming” Step 2 and MIT.” If the device is plugged in and activates, pro- follow all remaining steps.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Interactive Display (DID) will display “CLEARING If you have any problems, or require assistance, please CHANNELS.” Release the buttons when the EVIC/DID call toll-free 1-800-355-3515 or, on the Internet at displays “CHANNELS CLEARED.” HomeLink.com for information or assistance.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED WARNING! (Continued) The power sunroof switch is located on the overhead after 1982. Do not use a garage door opener without console between the courtesy/reading lights. these safety features. Call toll-free 1-800-355-3515 or, on the Internet at HomeLink.com for safety information or assistance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 WARNING! WARNING! (Continued) • Do not allow small children to operate the sunroof. • Never leave children unattended in a vehicle, or Never allow your fingers, other body parts, or any with access to an unlocked vehicle. Never leave the object, to project through the sunroof opening.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express Pinch Protect Feature Push the switch rearward and release it within one-half This feature will detect an obstruction in the opening of second and the sunroof will open automatically from any the sunroof during Express Close operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 Sunshade Operation Sunroof Maintenance The sunshade can be opened manually. However, the Use only a nonabrasive cleaner and a soft cloth to clean sunshade will open automatically as the sunroof opens. the glass panel. NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation open.
Page 232
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE and USB Port (Charge Only) have a cap attached to the The auxiliary power outlets can be found in the following outlet indicating “12V DC,” together with either a key locations: symbol, battery symbol, or USB symbol. CAUTION! A key symbol indicates that the key must be in the ON/RUN or ACC positions for the outlet to provide...
Page 233
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 • Lower left and lower right of the center stack when • Center console when equipped with bucket seats. equipped with a bench seat. Power Outlet — Center Console Power Outlets — Center Stack 1 —...
Page 234
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Inside the upper lid of the center storage compartment • Rear of the center console storage compartment — — if equipped. Quad Cab or Crew Cab. USB Port (Charge Only) — Upper Lid Power Outlet —...
Page 235
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 Power Outlet — Rear Center Console Fuse Power Outlet Fuse Locations 1 — F104 Fuse 20 A Yellow Power Outlet Center Console Bin / USB Port (Charge Only) 2 — F90–F91 Fuse 20 A Yellow Power Outlet Rear Center Console 3 —...
Page 236
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The key symbol indicates that this outlet can supply CAUTION! power when the key is in the ON/RUN or ACC posi- • Many accessories that can be plugged in draw tions. power from the vehicle’s battery, even when not in All accessories connected to the outlet(s) should be use (i.e., cellular phones, etc.).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED A removable cigar lighter and ash receiver are available. For vehicles with a bench seat the cupholder tray can be used to hold the ash receiver. POWER INVERTER —...
For further information on using the auxiliary switches, lower switch bank of the instrument panel which can be please refer to the Ram Body Builders Guide by accessing used to power various electronic devices and PTO www.rambodybuilder.com and choosing the appropriate (Power Take Off) –...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 CUPHOLDERS Front Seat Cupholders (40–20–40 Seats) The cupholders are located on the backside of the center portion of the front seat (20). Fold down the center section of the front seat to gain access to the cupholders. Front Instrument Panel Cupholders —...
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholders — If Equipped Some vehicles may be equipped with a rear cupholder that consists of two cup wells for rear passenger conve- Some vehicles are equipped with rear cupholders located nience. in the center armrest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 STORAGE Glove Compartment The glove compartment is located on the passenger side of the instrument panel and features both an upper and lower storage area. Glove Compartment 1 — Upper Glove Compartment 2 — Lower Glove Compartment...
Page 242
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper glove compartment push upward on To open the lower glove compartment, pull on the handle the handle release. The glove compartment door will to release the latch and lower the glove compartment automatically open.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Door Storage Rear Door Storage — If Equipped Storage compartments are located in both the driver and Front Door Storage — If Equipped passenger rear door trim panels. Storage areas and bottle holders (drivers side only) are located in the door trim panels.
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Storage Compartment — If Equipped WARNING! The center storage compartment is located between the • This armrest is not a seat. Anyone seated on the driver and passenger seats. The storage compartment armrest could be seriously injured during vehicle provides an armrest and contains both and upper and operation, or a collision.
Page 245
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 Pull on the upper handle on the front of the armrest to With the upper lid closed, pull on the lower handle to raise the cover. The upper storage area contains a USB open the lower storage bin.
Page 246
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision. The center console is equipped with a front storage bin located next to the cupholders.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 Second Row In-Floor Storage Bin — If Equipped To open in-floor storage bin, lift upward on the handle of the latch and open the lid. In-floor storage bins are located in front of the second row seats and can be used for extra storage.
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Seatback Storage Storage (Regular Cab) Located in the back of both the driver and passenger The storage bin is located behind the front seats and runs front seats are pockets that can be used for storage. the length of the cab.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 Storage and Seats (Crew Cab) Plastic Grocery Bag Retainers (Regular Cab Models) The Crew Cab models provide additional storage under the rear seats. Lift the seats to access the storage com- Retainer hooks which will hold plastic grocery bag partment.
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to the heating elements: The rear window defroster button is located on • Use care when washing the inside of the rear the climate control panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 Power Sliding Rear Window — If Equipped Manual Sliding Rear Window — If Equipped The switch for the power sliding rear window is located A locking device in the center of the window helps to on the overhead console.
Page 252
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Unfolding The Load Floor/Quad Cab 1. Lift the 60/40 seat cushion(s) to the upward position. Load Floor In Open Position 3. Reverse the procedure to store the load floor. Unfolding The Load Floor 2.
Page 253
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 Unfolding The Load Floor/Crew Cab 2. Unfold both the legs using the straps. 1. Lift the 60/40 seat cushion(s) to the upward position. Load Floor Legs In Opened Position Load Floor Legs In Stowed Position...
Page 254
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Lift the front panel until the load floor unfolds into Positioning The Load Floor For Storage Access Under position. The Seat 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Unsnap the securing snap located at either side of the load floor.
Page 255
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Quad Cab — If Equipped Crew Cab — If Equipped Load Floor Securing Straps/Quad Cab Load Floor Securing Straps/Crew Cab 4. Reverse the procedure to put the load floor back in the secured down position before you operate the vehicle.
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PICKUP BOX The pickup box has many features designed for utility and convenience. Pick Up Box Features 1 — Upper Load Floor Indents 2 — Bulk Head Dividers 3 — Cleats...
Page 257
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 NOTE: If you are installing a Toolbox, Ladder Rack or WARNING! (Continued) Headache Rack at the front of the Pickup Box, you must roads may cause shifting or bouncing of the cargo use Mopar Box Reinforcement Brackets that are available that may result in vehicle damage.
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE housings. Place wooden boards across the box from side NOTE: If the vehicle speed remains below 8 mph to side to create separate load compartments in the (13 km/h), the cargo camera image will be displayed pickup box.
The cargo storage bins provide watertight, lockable, Cargo Camera image may be deactivated by pressing the illuminated storage for up to 150 lbs (68 kg) for 1500 X soft button. On deactivation, the previous selected series vehicles or 300 lbs (136 kg) for 2500 and 3500 series screen will appear.
Page 260
• Do not exceed cargo weight rating of 150 lb (68 kg) 1500 series vehicles or 300 lbs (136 kg) for 2500 and 3500 series vehicles per bin. To open a storage bin with the RamBox unlocked, push and release the button located on the lid.
Page 261
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 RamBox Pushbutton And Lock RamBox Light Switch The interior of the RamBox will automatically illuminate CAUTION! when the lid is opened. In addition to the automatic illumination switch, there is a manual on/off switch Leaving the lid open for extended periods of time located at the rear of each storage bin.
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE storage bin, insert the key into the keyhole on the CAUTION! (Continued) pushbutton and turn clockwise to lock or counterclock- it is recommended that the bin lights be turned off wise to unlock. Always return the key to the upright manually using the on/off switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 RamBox Safety Warning RamBox Storage Bin Cover Emergency Release Lever — If Equipped Carefully follow these warnings to help prevent personal injury or damage to your vehicle: As a security measure, a Storage Bin Cover Emergency Release is built into the storage bin cover latching mecha- WARNING! nism.
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In the event of an individual being locked inside 1. Make sure the center handle is unlocked using the the storage bin, the storage bin cover can be opened from vehicle key and rotate the center handle vertically to inside of the bin by pulling on the glow-in-the-dark lever release the extender side gates.
Page 265
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 2. With the side gates open, position the extender fully forward in the bed against the front panel. Cargo Tie Down Loop 4. Rotate the center handle horizontally to secure the side gates in the closed position. Storage Position 3.
Page 266
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Divider Position The divider position is intended for managing your cargo and assisting in keeping cargo from moving around the bed. There are 11 divider slots along the bed inner panels which allow for various positions to assist in managing your cargo.
Page 267
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Center Handle And Lock Aligning Gate To Slots 3. Rotate the side gates closed so that the outboard ends 1 — Center Handle Lock are secured into the intended slots of the bed. 2 —...
Page 268
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE additional cargo room is needed. The extender position utilizes a locating pin and rotating handle located on both sides of the truck bed near the tailgate. Side Gates Closed 5. Lock the center handle to secure the panel into place. Extender Position Extender Position The extender position allows you to load the bed of the...
Page 269
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 To install the bed extender into the extender position perform the following: 1. Lower the tailgate. 2. Make sure the center handle is unlocked and rotate the center handle vertically in order to release the ex- tender side gates.
Page 270
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Rotate the handles to the horizontal position to secure WARNING! into place. To reduce the risk of potential injury or property damage: • Cargo must be secured. • Do not exceed cargo load rating of your vehicle. •...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 Bed Rail Tie-Down System CAUTION! The maximum load per cleat should not exceed 250 lbs (113 kg) and the angle of the load on each cleat should not exceed 45 degrees above horizontal, or damage to the cleat or cleat rail may occur.
Page 272
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE out on the cleat and slide it to the detent nearest the To remove the cleats from the utility rail, remove the end desired location. Make sure the cleat is seated in the cap screw located in the center of the end cap, using a detent and tighten the nut.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 SLIDE-IN CAMPERS EASY-OFF TAILGATE To simplify mounting of a camper unit with an overhang, Camper Applications the tailgate can be removed. Certain truck models are not recommended for slide-in campers. To determine if your vehicle is excluded, please NOTE: If your vehicle is equipped with a rear camera or refer to the “Consumer Information Truck-Camper Load- RKE (Remote Keyless Entry) the electrical connector...
Page 274
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Connector Bracket Locking Tab 2. Remove the connector bracket from the sill by pushing 3. Disconnect the chassis wiring harness, ensuring the inward in the locking tab. connector bracket does not fall into the sill. 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 5. Connect the tailgate plug (provided in the glove box) to the tailgate wiring harness to ensure that the terminals do not corrode. 6. Tape the tailgate harness and bracket against the forward-facing surface of the tailgate. This will pre- vent damaging the connector and bracket when stor- ing or reinstalling the tailgate.
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Remove the tailgate from the vehicle. TRI-FOLD TONNEAU COVER — IF EQUIPPED Your vehicle may be equipped with a Tri-Fold Tonneau NOTE: Do not carry the tailgate loose in the truck Cover which consists of different features: pickup box.
Page 277
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 1. Lower the tailgate to gain access to the first set of two 2. Pull down on the first set of clamps on both driver and tonneau cover clamps located on the driver and pas- passenger sides to the semi clamped position.
Page 278
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull down on the clamp wire and push the clamp up into the proper released position. Improper Clamp Wire Released Position Proper Released Position NOTE: Be sure the clamp and clamp wire is in the proper released position.
Page 279
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 CAUTION! Make sure the tonneau cover clamp and clamp wire is in the proper released position. If the clamp and clamp wire is not properly released, damage to the tonneau cover material will result. 4.
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Proper Released Position Stowage Strap 8. Be sure to clip both stowage straps together to insure 9. With two people remove the cover. the cover stays together. NOTE: Be sure the Tonneau Cover has been folded completely before removing.
Page 281
3. Push clamp wires up and under the flange of box (or and push the Cover forward against the front of the flange of Ram Box rail, if equipped) to the semi truck bed. The Tonneau Cover centers itself when clamped position.
Page 282
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Push clamp handles upward to the clamped position to properly engage the clamps. Improper Clamp Position 5. Disengage the stowage straps. Clamped Position NOTE: Once clamped, be sure the clamps are not par- tially clamped to the truck bed flange.
Page 283
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 6. Unfold Tonneau Cover to the intermediate position. 7. Completely unfold the Tonneau Cover. NOTE: The vehicle cannot be driven when the Tonneau Cover is in this position. Fully Unfolded Position Intermediate Position (Vehicle Cannot Be Driven)
Page 284
8. Pull down on the second set of clamp handles to 9. Push clamp wires up and under the flange of box (or release the clamps from the stowed position. flange of Ram Box rail, if equipped) to the semi clamped position. Stowed Position...
Page 285
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 10. Push clamp handles upward to the clamped position NOTE: Once clamped, be sure the clamps are not par- to properly engage the clamps. tially clamped to the truck bed flange. Clamped Position Improper Clamp Position...
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Tonneau Cover clamps can be locked when in the CAUTION! clamped position by placing a lock through the locking hole. It is the driver’s responsibility to ensure the Tonneau Cover is properly installed on the vehicle. Failure to follow this procedure can result in detachment of the Tonneau Cover from the vehicle and/or damage to the vehicle/Tonneau Cover.
Page 287
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..288 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) ......331 INSTRUMENT CLUSTER —...
Page 288
286 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ DID Selectable Menu Items ....363 ▫ CD Player — If Equipped....418 CYBERSECURITY.
Page 289
UNDERSTANDING YOUR INSTRUMENT PANEL 287 ▫ Uconnect Access (8.4A/8.4AN) ... .458 PERSONALIZED MENU BAR ....444 ▫ Vehicle Health Alert ....459 UCONNECT VOICE RECOGNITION .
UNDERSTANDING YOUR INSTRUMENT PANEL 289 INSTRUMENT CLUSTER — MIDLINE (EVIC) Midline EVIC Instrument Cluster — If Equipped...
Page 292
290 UNDERSTANDING YOUR INSTRUMENT PANEL • The fuel pump symbol points to the side of the 1. Tachometer • Indicates the engine speed in revolutions per minute vehicle where the fuel door is located. (RPM x 1000). 2. Electronic Vehicle Information Center (EVIC) Display 5.
Page 293
UNDERSTANDING YOUR INSTRUMENT PANEL 291 CAUTION! WARNING! Driving with a hot engine cooling system could A hot engine cooling system is dangerous. You or damage your vehicle. If the temperature gauge reads others could be badly burned by steam or boiling “H”...
292 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — PREMIUM (DID) Premium DID Instrument Cluster — If Equipped...
Page 295
UNDERSTANDING YOUR INSTRUMENT PANEL 293 1. Tachometer NOTE: The voltmeter may show a gauge fluctuation at • Indicates the engine speed in revolutions per minute various engine temperatures. This cycling operation is caused by the post-heat cycle of the intake manifold (RPM x 1000).
Page 296
294 UNDERSTANDING YOUR INSTRUMENT PANEL • The gauge pointer will likely indicate a higher tem- 5. Fuel Gauge • The pointer shows the level of fuel in the fuel tank perature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be when the Keyless Push Button Ignition is in the allowed to exceed the upper limits of the normal ON/RUN position.
UNDERSTANDING YOUR INSTRUMENT PANEL 295 WARNING AND INDICATOR LIGHTS WARNING! IMPORTANT: The warning / indicator lights switch on A hot engine cooling system is dangerous. You or in the instrument panel together with a dedicated mes- others could be badly burned by steam or boiling sage and/or acoustic signal when applicable.
296 UNDERSTANDING YOUR INSTRUMENT PANEL Red Telltale Indicator Lights Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition switch is first turned to ON/RUN, this light will turn on for four to eight seconds as a bulb check.
Page 299
UNDERSTANDING YOUR INSTRUMENT PANEL 297 Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during startup, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
Page 300
298 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reser- voir.
Page 301
UNDERSTANDING YOUR INSTRUMENT PANEL 299 The light will remain on until the cause is corrected. Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- Operation of the Brake Warning Light can be checked by tions.
Page 302
300 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Security Warning Light — If Equipped Red Telltale What It Means Light Vehicle Security Warning Light — If Equipped This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed.
Page 303
UNDERSTANDING YOUR INSTRUMENT PANEL 301 Battery Charge Warning Light Red Telltale What It Means Light Battery Charge Warning Light This light illuminates when the battery is not charging properly. If it stays on while the engine is run- ning, there may be a malfunction with the charging system. Contact your authorized dealer as soon as possible.
Page 304
302 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Pressure Warning Light Red Telltale What It Means Light Oil Pressure Warning Light This light indicates low engine oil pressure. If the light turns on while driving, stop the ve- hicle and shut off the engine as soon as possible. A chime will sound when this light turns Do not operate the vehicle until the cause is corrected.
Page 305
UNDERSTANDING YOUR INSTRUMENT PANEL 303 Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash de- pending on the nature of the problem.
Page 306
304 UNDERSTANDING YOUR INSTRUMENT PANEL Electric Power Steering Fail Warning — If Equipped Red Telltale What It Means Light Electric Power Steering Fail Warning — If Equipped This light is used to manage the electrical warning of the EPS (Power Steering System). Re- fer to “Power Steering”...
Page 307
UNDERSTANDING YOUR INSTRUMENT PANEL 305 Oil Pressure Warning Light Red Telltale What It Means Light Oil Pressure Warning Light This light indicates low engine oil pressure. If the light turns on while driving, stop the ve- hicle and shut off the engine as soon as possible. A chime will sound when this light turns Do not operate the vehicle until the cause is corrected.
Page 308
306 UNDERSTANDING YOUR INSTRUMENT PANEL Door Open Warning Light Red Telltale What It Means Light Door Open Warning Light This indicator will illuminate when a door is open and not fully closed. NOTE: If the vehicle is moving there will also be a single chime. NOTE: Door Open Warning Light will differ depending on the equipped instrument cluster display...
UNDERSTANDING YOUR INSTRUMENT PANEL 307 Yellow Telltale Indicator Lights Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON position before engine start.
Page 310
308 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Prolonged driving with the Malfunction Indicator A malfunctioning catalytic converter, as referenced Light (MIL) on could cause damage to the engine above, can reach higher temperatures than in normal control system. It also could affect fuel economy and operating conditions.
Page 311
UNDERSTANDING YOUR INSTRUMENT PANEL 309 Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light — If Equipped The “ESC Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position, and when ESC is activated.
Page 312
310 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light indicates the Electronic Stability Control (ESC) is off. Low Washer Fluid Indicator Light —...
Page 313
UNDERSTANDING YOUR INSTRUMENT PANEL 311 Tire Pressure Monitoring Indicator Light Yellow Telltale What It Means Light Tire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.
Page 314
312 UNDERSTANDING YOUR INSTRUMENT PANEL one or more of your tires is significantly under-inflated. operating properly. The TPMS malfunction indicator is Accordingly, when the low tire pressure telltale illumi- combined with the low tire pressure telltale. When the nates, you should stop and check your tires as soon as system detects a malfunction, the telltale will flash for possible and inflate them to the proper pressure.
Page 315
UNDERSTANDING YOUR INSTRUMENT PANEL 313 CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
Page 316
314 UNDERSTANDING YOUR INSTRUMENT PANEL Low Fuel Indicator Light Yellow Telltale What It Means Light Low Fuel Indicator Light When the fuel level reaches approximately 1.5 gal (5.8 L) this light will turn on, and remain on until fuel is added. Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means...
Page 317
UNDERSTANDING YOUR INSTRUMENT PANEL 315 Yellow Telltale What It Means Light If both the Brake Warning Light and the ABS Warning Light are on, see an authorized dealer immediately. Refer to “Anti-Lock Brake System” in “Starting And Operating” for further in- formation.
Page 318
316 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Continuous driving with the Transmission Tempera- If you continue operating the vehicle when the ture Warning Light illuminated will eventually cause Transmission Temperature Warning Light is illumi- severe transmission damage or transmission failure. nated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire.
Page 319
UNDERSTANDING YOUR INSTRUMENT PANEL 317 Rear Fog Light Indicator — If Equipped Yellow Telltale What It Means Light Rear Fog Light Indicator This indicator will illuminate when the rear fog lights are on. Low Coolant Level Indicator Light Yellow Telltale What It Means Light Low Coolant Level Indicator Light...
Page 320
318 UNDERSTANDING YOUR INSTRUMENT PANEL Air Suspension Payload Protection Telltale — If Equipped Yellow Telltale What It Means Light Air Suspension Payload Protection Telltale This telltale will turn on to indicate that the maximum payload may have been exceeded or load leveling cannot be achieved at its current ride height.
Page 321
UNDERSTANDING YOUR INSTRUMENT PANEL 319 Cargo Light — If Equipped Yellow Tell- What It Means tale Light Cargo Light The cargo light will illuminate when the cargo light is activated by pressing the cargo light but- ton on the headlight switch. Loose Fuel Filler Cap Indicator Light —...
Page 322
320 UNDERSTANDING YOUR INSTRUMENT PANEL Service Stop/Start System Indicator Light — If Equipped Yellow Telltale What It Means Light Service Stop/Start System Indicator Light — If Equipped This telltale will turn on to indicate the Stop/Start system is not functioning properly and service is required.
Page 323
UNDERSTANDING YOUR INSTRUMENT PANEL 321 Air Suspension Off-Road 2 Indicator Light — If Equipped Yellow Telltale What It Means Light Air Suspension Off-Road 2 Indicator Light This light will illuminate when the air suspension system is set to the Off-Road 2 setting. For further information, refer to “Air Suspension System”...
Page 324
322 UNDERSTANDING YOUR INSTRUMENT PANEL Air Suspension Ride Height Lowering Indicator Light— If Equipped Yellow Telltale What It Means Light Air Suspension Ride Height Lowering Indicator Light This light will blink and alert the driver that the vehicle is changing to a lower ride height. 4WD Indicator Light —...
Page 325
UNDERSTANDING YOUR INSTRUMENT PANEL 323 4 Low Indicator Light — If Equipped Yellow Telltale What It Means Light 4 Low Indicator Light This light alerts the driver that the vehicle is in the four-wheel drive LOW mode. The front and rear driveshafts are mechanically locked together forcing the front and rear wheels to rotate at the same speed.
Page 326
324 UNDERSTANDING YOUR INSTRUMENT PANEL Service 4WD Indicator Light — If Equipped Yellow Telltale What It Means Light Service 4WD Indicator Light If the light stays on or comes on during driving, it means that the 4WD system is not func- tioning properly and that service is required.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 Green Telltale Indicator Lights Park/Headlight ON Indicator Light Green Telltale What It Means Light Park/Headlight ON Indicator Light This indicator will illuminate when the park lights or headlights are turned on. Front Fog Indicator Light — If Equipped Green Telltale What It Means Light...
Page 328
326 UNDERSTANDING YOUR INSTRUMENT PANEL Turn Signal Indicator Lights Green Tell- What It Means tale Light Turn Signal Indicator Lights The instrument cluster directional arrow will flash independently for the LEFT or RIGHT turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multifunction lever is moved down (LEFT) or up (RIGHT).
Page 329
UNDERSTANDING YOUR INSTRUMENT PANEL 327 Stop/Start Active Indicator Light — If Equipped Green Telltale What It Means Light Stop/Start Active Indicator Light — If Equipped This telltale will illuminate when the Stop/Start function is in “Autostop” mode. Electronic Speed Control Set Indicator Light — If Equipped Green Telltale What It Means Light...
Page 330
328 UNDERSTANDING YOUR INSTRUMENT PANEL 4WD AUTO Indicator Light — If Equipped Green Telltale What It Means Light 4WD AUTO Indicator Light This light alerts the driver that the vehicle is in the four-wheel drive auto mode, and the front axle is engaged, but the vehicle’s power is sent to the rear wheels. Four-wheel drive will be automatically engaged when the vehicle senses a loss of traction.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 White Telltale Indicator Lights Electronic Speed Control ON Indicator Light White Telltale What It Means Light Electronic Speed Control ON Indicator Light This light will turn on when the electronic speed control is ON. Electronic Speed Control SET Indicator Light — If Equipped White Telltale What It Means Light...
330 UNDERSTANDING YOUR INSTRUMENT PANEL Hill Decent Control (HDC) Indicator Light — If Equipped White Telltale What It Means Light Hill Decent Control (HDC) Indicator Light This indicator will illuminate when Hill Descent Control (HDC) has been selected using the Hill Descent Control Switch.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC Menu items consists of the following: (EVIC) • Speedometer The Electronic Vehicle Information Center (EVIC) fea- • Vehicle Info tures a driver-interactive display that is located in the • Fuel Economy Info instrument cluster.
Page 334
332 UNDERSTANDING YOUR INSTRUMENT PANEL • UP Arrow Button The system allows the driver to select information by pushing the following EVIC Control buttons located on Push and release the UP arrow button to scroll the left side of the steering wheel: upward through the main menu items.
UNDERSTANDING YOUR INSTRUMENT PANEL 333 • RIGHT Arrow Button Electronic Vehicle Information Center (EVIC) Displays — 3.5” Display Push and release the RIGHT arrow button to access/select the information screens or sub- menu screens of a main menu item. Push and hold the RIGHT arrow button for two seconds to reset displayed/selected features that can be reset.
Page 336
334 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC displays are located in the center portion of the 7. Audio/Phone Information And Sub-menu Information cluster and consists of seven sections: Whenever there are sub-menus available, the position 1. Compass Display within the sub-menu is shown here. Displays the current direction.
UNDERSTANDING YOUR INSTRUMENT PANEL 335 the EVIC’s compass/outside temp line. Examples of this seconds and then returns to the previous screen. An message type are “Right Front Turn Signal Lamp Out” example of this message type is “Automatic High Beams and “Low Tire Pressure.”...
Page 338
336 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Push and release the DOWN arrow button to 2. Push and release the DOWN arrow button to scroll downward through the main menu to “Ve- scroll downward through the main menu to “Ve- hicle Info.” hicle Info.”...
UNDERSTANDING YOUR INSTRUMENT PANEL 337 • Tire Pressure EVIC Selectable Menu Items • Coolant Temp Push and release the UP or DOWN arrow but- tons until the desired Selectable Menu item is high- • Transmission Temp (Automatic only) lighted in the EVIC. •...
Page 340
338 UNDERSTANDING YOUR INSTRUMENT PANEL • Current Fuel Economy Gauge Trip B • Average Fuel Economy value Push and release UP or DOWN arrow button until the Trip B menu item is highlighted in the EVIC. • Range to Empty The Trip B information will display the following: Trip Menu Item •...
Page 341
UNDERSTANDING YOUR INSTRUMENT PANEL 339 Air Suspension Menu Item — If Equipped EVIC Messages (Stored) Push and release the UP or DOWN arrow button Number of messages stored will be indicated on the until the Air Suspension menu item is highlighted in highlighted Messages Menu bar.
Page 342
340 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Pressure Low • Parking Brake Engaged • Oil Change Due • Brake Fluid Low • Fuel Low • Service Electronic Braking System • Service Anti-lock Brake System • Engine Temperature Hot • Service Electronic Throttle Control •...
Page 343
UNDERSTANDING YOUR INSTRUMENT PANEL 341 • Key in Ignition • Driver Seatbelt Unbuckled • Key in Ignition Lights On • Passenger Seatbelt Unbuckled • Remote Start Active Key To Run • Front Seatbelts Unbuckled • Remote Start Active Push Start Button •...
Page 344
342 UNDERSTANDING YOUR INSTRUMENT PANEL • Trailer Brake Disconnected • Selected Ride Height Not Permitted - Payload Too Light • Service Transmission • Battery Low Start Engine To Change Ride Height • Service Shifter • Normal Ride Height Achieved • Engage Park Brake To Prevent Rolling •...
Page 345
UNDERSTANDING YOUR INSTRUMENT PANEL 343 • Reduce Speed To Maintain Selected Ride Height • Stop/Start Not Ready Hood Open – If Equipped • Air Suspension System Cooling Down Please Wait • Stop/Start Not Ready Battery Charging – If Equipped • Vehicle Cannot Be Lowered Door Open •...
Page 346
344 UNDERSTANDING YOUR INSTRUMENT PANEL • Stop/Start Not Ready Engine Temperature Too Low – • Stop/Start Autostop Active – If Equipped If Equipped • Stop/Start To Restart Push Clutch Or Shift To Neutral • Stop/Start Not Ready Driver Seatbelt Unbuckled – If –...
Page 347
UNDERSTANDING YOUR INSTRUMENT PANEL 345 Screen Setup Menu Item Push and release the UP and DOWN button until Set- tings displays in the EVIC. Push and release the UP or DOWN arrow button until the Screen Setup menu item is highlighted in the Follow the prompts to display and set any of the follow- EVIC.
Page 348
346 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Language Select Language English, Spanish, French, Italian, German, Dutch Units Units U.S.; Metric • Notification — Sound Only; Sound & Display ParkSense ParkSense •...
Page 349
UNDERSTANDING YOUR INSTRUMENT PANEL 347 Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Automatic High- Auto Highbeams On; Off beams Flash Lights with Lights w/ Lock On; Off Lock Auto Lock Doors Auto Lock Doors On;...
Page 350
348 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Passive Entry Passive Entry On; Off Remote Start Com- Rmt Start Comfort Off; Remoter Start; All starts fort System Easy Exit Seat Easy Exit Seat On;...
UNDERSTANDING YOUR INSTRUMENT PANEL 351 Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Compass Variance Compass Var 1-15 increments of 1 Calibrate Compass Compass Cal Cancel; Calibrate Fuel Saver Display Fuel Saver On; Off Turn Menu OFF DRIVER INFORMATION DISPLAY (DID) Push and release the RIGHT...
Page 354
352 UNDERSTANDING YOUR INSTRUMENT PANEL • Trip A • Trip B • Stop/Start Info (If Equipped) • Trailer Tow • Audio • Stored Messages • Screen Setup • Vehicle Settings (Not Equipped with a Uconnect 5.0 & 8.4 radio) Driver Information Display (DID) The DID Menu items consists of the following: •...
Page 355
UNDERSTANDING YOUR INSTRUMENT PANEL 353 • UP Arrow Button Vehicle Information (Customer Information Features) The system allows the driver to select information by Push and release the UP arrow button to scroll pushing the following buttons mounted on the steering upward through main...
354 UNDERSTANDING YOUR INSTRUMENT PANEL • RIGHT Arrow Button Driver Information Display (DID) Displays Push and release the RIGHT arrow button to access/select the information screens or sub- menu screens of a main menu item. Push and hold the RIGHT arrow button for two seconds to reset displayed/selected features that can be reset.
Page 357
UNDERSTANDING YOUR INSTRUMENT PANEL 355 The DID displays are located in the center portion of the 8. 4WD Status cluster and consists of eight sections: 9. Selectable Gauge 2 (Trans Temp, Oil Temp, Oil Life, 1. Main Screen — The inner ring of the display will Trailer Brake, Current MPG) illuminate in grey under normal conditions, yellow for 10.
356 UNDERSTANDING YOUR INSTRUMENT PANEL • Five Second Unstored Messages reviewed from the “Messages” main menu item. As long as there is a stored message, an “i” will be displayed in When the appropriate conditions occur, this type of the DID’s compass/outside temp line. Examples of this message takes control of the main display area for five message type are “Right Front Turn Signal Lamp Out”...
Page 359
UNDERSTANDING YOUR INSTRUMENT PANEL 357 Vehicles Equipped With Passive Entry Vehicles Not Equipped With Passive Entry 1. Without pushing the brake pedal, push the ENGINE 1. Without pushing the brake pedal, cycle the ignition to START/STOP button and cycle the ignition to the the ON/RUN position (do not start the engine).
358 UNDERSTANDING YOUR INSTRUMENT PANEL • Service Electronic Throttle Control NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not • Service Power Steering reset. If necessary, repeat this procedure. • Cruise Off DID Messages •...
Page 361
UNDERSTANDING YOUR INSTRUMENT PANEL 359 • Battery Voltage Low • Remote Start Aborted Fuel Low • Service Electronic Throttle Control • Remote Start Aborted Too Cold • Lights On • Remote Start Aborted Door Open • Right Turn Signal Light Out •...
Page 362
360 UNDERSTANDING YOUR INSTRUMENT PANEL • Doors Open • Transmission Too cold Idle with Engine On • Gear Not Available • Washer Fluid Low • Shift Not Allowed • Service Air Suspension System • Shift to Neutral then Drive or Reverse •...
Page 363
UNDERSTANDING YOUR INSTRUMENT PANEL 361 • Entry/Exit Ride Height Achieved • Stop/Start Not Ready Hood Open – If Equipped • Selected Ride Height Not Permitted • Stop/Start Not Ready Battery Charging – If Equipped • Service Air Suspension System Immediately •...
Page 364
362 UNDERSTANDING YOUR INSTRUMENT PANEL • Stop/Start Not Ready Driver Seatbelt Unbuckled – If • Stop/Start To Restart Push Clutch Or Shift To Neutral Equipped – If Equipped • Stop/Start Not Ready Driver Door Open – If Equipped • Stop/Start Req’d Fault Detected – If Equipped •...
Vehicle Info tons until the desired Selectable Menu icon/title is submenu items: highlighted in the DID. Tire Pressure Monitoring System (1500 & 2500 Series) Digital Speedometer A vehicle ICON is displayed with tire pressure values in each corner of the ICON.
Page 366
364 UNDERSTANDING YOUR INSTRUMENT PANEL – Tire Pressure is an information only function and Fuel Economy cannot be reset. – Refer to the Tire Pressure Information System Push and release the UP or DOWN arrow (TPIS)” under Starting and Operating for further button until the Fuel Economy Menu icon/title information.
Page 367
UNDERSTANDING YOUR INSTRUMENT PANEL 365 • Average MPG or L/100 km Hold the RIGHT arrow button to reset all the information. • Average MPH or km/h Stop/Start – If Equipped • Elapsed Time Hold the RIGHT arrow button to reset all the Push and release the UP or DOWN information.
Page 368
366 UNDERSTANDING YOUR INSTRUMENT PANEL Audio Screen Setup Push and release the UP or DOWN Push and release the UP or DOWN row button until the Audio display icon is row button until the Screen Setup display highlighted in the DID. Push and release the icon is highlighted in the DID.
Page 369
UNDERSTANDING YOUR INSTRUMENT PANEL 367 Settings Options • None Upper Left • Compass • Outside Temp. • Time • Range to Empty • Average MPG (not available for CNG models) • Current MPG (not available for CNG models) • Trip A •...
Page 370
368 UNDERSTANDING YOUR INSTRUMENT PANEL Settings Options • None Upper Right • Compass • Outside Temp. (Default) • Time • Range to Empty • Average MPG (not available for CNG models) • Current MPG (not available for CNG models) • Trip A •...
Page 371
UNDERSTANDING YOUR INSTRUMENT PANEL 369 Settings Options • None (Default) Lower Left • Compass • Outside Temp. • Time • Range to Empty • Average MPG (not available for CNG models) • Current MPG (not available for CNG models) • Trailer Brake Gain •...
Page 372
370 UNDERSTANDING YOUR INSTRUMENT PANEL Settings Options • None (Default) Upper Gauge • Trans Temp. • Oil Temp. • Oil Life • Current MPG (not available for CNG models) • Trailer Brake Gain • None (Default) Lower Gauge • Trans Temp. •...
Page 373
UNDERSTANDING YOUR INSTRUMENT PANEL 371 Settings Options • Cancel Restore Defaults • OK Vehicles Settings (Customer-Programmable Push and release the UP and DOWN arrow Features) button until Personal Settings displays in the DID. Follow the prompts to display and set any of the follow- NOTE: This feature is only available on 5.0 and ing Personal Settings.
Page 374
372 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Language Select Language English, Spanish, French, Italian, German, Dutch Units Units U.S.; Metric • Notification — Sound Only; ParkSense ParkSense Sound & Display •...
Page 375
UNDERSTANDING YOUR INSTRUMENT PANEL 373 Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Illuminated Approach Lights w/ Unlock 0 seconds; 30 seconds; 60 sec- onds; 90 seconds Headlights On with Wipers Lights w/ Wipers On; Off Automatic Highbeams Auto Highbeams On;...
Page 376
374 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Key-off Power Delay Power Off Delay Off; 45 seconds; 5 minutes; 10 minutes • Aux Switches Commercial Settings Commercial • Power Take-Off • PIN Setup Air Suspension Display Alerts Air Susp.
Page 377
UNDERSTANDING YOUR INSTRUMENT PANEL 375 Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Brake Type Brake Type Light Electric; Heavy Electric; Light EOH; Heavy EOH • Trailer # (# is equal to slot Trailer Name Trailer Name position) •...
Page 379
UNDERSTANDING YOUR INSTRUMENT PANEL 377 software updates to improve the usability and perfor- WARNING! (Continued) mance of your systems or to reduce the potential risk of • ONLY insert media (e.g., USB, SD card, or CD) into unauthorized and unlawful access to your vehicle sys- your vehicle if it came from a trusted source.
378 UNDERSTANDING YOUR INSTRUMENT PANEL • To help further improve vehicle security and minimize UCONNECT SETTINGS the potential risk of a security breach, vehicle owners The Uconnect system uses a combination of buttons on should: the touchscreen and buttons on the faceplate located on •...
Page 381
UNDERSTANDING YOUR INSTRUMENT PANEL 379 Uconnect 5.0 Buttons On The Touchscreen And Buttons Uconnect 8.4A/8.4AN Buttons On The Touchscreen And On The Faceplate Buttons On The Faceplate 1 — Uconnect Buttons On The Touchscreen 1 — Uconnect Buttons On The Touchscreen 2 —...
380 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Faceplate Buttons On The Touchscreen Buttons on the faceplate are located below the Uconnect Buttons on the touchscreen are accessible on the system in the center of the instrument panel. In addition, Uconnect display.
Page 383
UNDERSTANDING YOUR INSTRUMENT PANEL 381 • Display Mode When making a selection, press the button on the touch- screen to enter the desired mode. Once in the desired When in this display you may select the Auto or Manual mode, press and release the preferred setting until the display settings.
Page 384
382 UNDERSTANDING YOUR INSTRUMENT PANEL • Fuel Saver Display — If Equipped • Show Command List This feature will allow you to enable fuel saver mode and When in this display, you may change the Show Com- will be displayed in the EVIC/DID. Press the “Fuel Saver mand List settings.
Page 385
UNDERSTANDING YOUR INSTRUMENT PANEL 383 • Set Date Refer to “ParkSense” in “Understanding The Features Of Your Vehicle” for system function and operating infor- When in this display, you may set the date manually. mation. Press the “Set Date” button then press the corresponding •...
Page 386
384 UNDERSTANDING YOUR INSTRUMENT PANEL is MEDIUM. To change the mode status, press the “Rear display whenever the shift lever/gear selector is put into ParkSense Volume” button and select the “Low” “Med” REVERSE. The image will be displayed on the radio or “High”...
Page 387
UNDERSTANDING YOUR INSTRUMENT PANEL 385 or the ignition is switched to the OFF position. To set the and operating information. To make your selection, press ParkView Backup Camera Delay push the SETTINGS the “Hill Start Assist” button on the touchscreen and button on the faceplate, then the “Safety &...
Page 388
386 UNDERSTANDING YOUR INSTRUMENT PANEL doors are unlocked with the Remote Keyless Entry (RKE) or “Off.” Refer to ”Automatic High Beam — If transmitter. To change the Illuminated Approach status, Equipped” in “Understanding The Features Of Your press the “Illuminated Approach” button on the touch- Vehicle”...
Page 389
UNDERSTANDING YOUR INSTRUMENT PANEL 387 • Sound Horn With Remote Start (24 km/h). To make your selection, press the “Auto Door Locks” button on the touchscreen and select from “On” When this feature is selected, the horn will sound when or “Off.”...
Page 390
388 UNDERSTANDING YOUR INSTRUMENT PANEL • Memory Linked to Fob — If Equipped grabbed. To make your selection, press the “Passive Entry” button on the touchscreen and select from “On” or This feature provides automatic driver seat positioning to “Off.” Refer to “Keyless Enter-N-Go” in “Things To enhance driver mobility when entering and exiting the Know Before Starting Your Vehicle”...
Page 391
UNDERSTANDING YOUR INSTRUMENT PANEL 389 • Auto-On Driver Heated/Ventilated Seat & Steering • Headlight Off Delay Wheel With Vehicle Start — If Equipped When this feature is selected, the driver can choose to When this feature is selected the driver’s heated seat and have the headlights remain on for 0, 30, 60, or 90 seconds heated steering wheel will automatically turn ON when when exiting the vehicle.
Page 392
390 UNDERSTANDING YOUR INSTRUMENT PANEL • Auto Entry/Exit — If Equipped • Flash Lights With Lower When this feature is selected, it automatically lowers the When this feature is selected, the front and rear turn vehicle ride height position when shifted into park. Press signals will flash when the RKE transmitter REMOTE the “Auto Entry/Exit”...
Page 393
UNDERSTANDING YOUR INSTRUMENT PANEL 391 • Automatic Aero Mode (1500 Model Only) • Wheel Alignment Mode When this feature is selected the Ride Height will auto- This feature prevents auto leveling of the air suspension matically be adjusted depending on the vehicle speed. To while performing a wheel alignment service.
Page 394
392 UNDERSTANDING YOUR INSTRUMENT PANEL • Trailer Brake Type buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the When this feature is selected, the Trailer Brake Type can touchscreen. be changed between “Light Electric,”...
Page 395
UNDERSTANDING YOUR INSTRUMENT PANEL 393 To make your selection, press the “AUX Volume Offset” NOTE: Keep magnetic materials away from the top of the button on the touchscreen, select “On” or “Off.” instrument panel, such as iPod’s, Mobile Phones, Lap- tops and Radar Detectors.
Page 396
394 UNDERSTANDING YOUR INSTRUMENT PANEL • Perform Compass Calibration SiriusXM Setup — If Equipped After pressing the “SiriusXM Setup” button on the touch- Press the “Calibration” button on the touchscreen to screen, the following settings will be available: change this setting. This compass is self-calibrating, which eliminates the need to manually reset the compass.
Page 397
UNDERSTANDING YOUR INSTRUMENT PANEL 395 Write down the SIRIUS ID numbers for your receiver. To Clear Personal Data reactivate your service, either call the number listed on After pressing the “Clear Personal Data Settings” button the screen or visit the provider online. on the touchscreen the following settings will be avail- able: NOTE: SiriusXM Travel Link is a separate subscription...
396 UNDERSTANDING YOUR INSTRUMENT PANEL System Information Brake, Audio, Phone/Bluetooth, SiriusXM Setup (if equipped), Restore Settings, Clear Personal Data and After pressing the “System Information” button on the System Information. touchscreen the following information will be available: NOTE: Only one category may be selected at a time. •...
Page 399
UNDERSTANDING YOUR INSTRUMENT PANEL 397 Display “–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the After pressing the “Display” button on the touchscreen touchscreen. the following settings will be available. NOTE: To make changes to the Display Brightness with •...
Page 400
398 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Theme • Touchscreen Beep This feature will allow you to choose a background When in this display, you may turn on or shut off the theme for the display screen. The theme will change the sound heard when a touchscreen button (button on the background color, highlight color, and button color of the touchscreen) is pressed.
Page 401
UNDERSTANDING YOUR INSTRUMENT PANEL 399 • Controls Screen Time-Out — If Equipped in the Driver Information Display (DID), and navigation system (if equipped). The following selectable units of When this feature is selected, the Controls Screen will measure are listed below: stay open for five seconds before the screen times out.
Page 402
400 UNDERSTANDING YOUR INSTRUMENT PANEL • Temperature • Voice Response Length Select from: “°C,” or “°F.” When in this display, you may change the Voice Re- sponse Length settings. To change the Voice Response • Power Length, select from the “Brief” or “Detailed” buttons on Select from: “HP”...
Page 403
UNDERSTANDING YOUR INSTRUMENT PANEL 401 • Set Time Minutes Clock After pressing the “Clock” button on the touchscreen the This feature will allow you to adjust the minutes. The following settings will be available: “Sync with GPS Time” button on the touchscreen must be unchecked.
Page 404
402 UNDERSTANDING YOUR INSTRUMENT PANEL Safety & Driving Assistance equipped. The chime volume settings include LOW, MEDIUM, and HIGH. The factory default volume setting After pressing the “Safety & Driving Assistance” button is MEDIUM. To change the mode status, press the “Front on the touchscreen the following settings will be avail- ParkSense Volume”...
Page 405
UNDERSTANDING YOUR INSTRUMENT PANEL 403 • Tilt Side Mirrors In Reverse — If Equipped the vehicle above the rear License plate. To make your selection, press the “ParkView Backup Camera” button When this feature is selected, the outside sideview mir- on the touchscreen, until a check-mark appears next to rors will tilt downward when the ignition is in the RUN the setting, indicating that the setting had been selected.
Page 406
404 UNDERSTANDING YOUR INSTRUMENT PANEL • ParkView Backup Camera Delay and operating information. To make your selection, press the “Hill Start Assist” button on the touchscreen to select When this feature is enabled, it will allow the ParkView from on or off. Backup Camera display to remain on while in drive for •...
Page 407
UNDERSTANDING YOUR INSTRUMENT PANEL 405 • Headlights With Wipers — If Equipped Lights After pressing the “Lights” button on the touchscreen the When this feature is selected, and the headlight switch is following settings will be available. in the AUTO position, the headlights will turn on ap- proximately 10 seconds after the wipers are turned on.
Page 408
406 UNDERSTANDING YOUR INSTRUMENT PANEL • Flash Lights With Lock Lock” button on the touchscreen until a check-mark appears next to setting, showing that setting has been When this feature is selected, the exterior lamps will flash selected. when the doors are locked or unlocked with the Remote •...
Page 409
UNDERSTANDING YOUR INSTRUMENT PANEL 407 Lock” button on the touchscreen until a check-mark press of the Remote Keyless Entry (RKE) transmitter appears next to setting, showing that setting has been UNLOCK button you must push the RKE transmitter selected. UNLOCK button twice to unlock the passenger’s doors. When Unlock “All Doors”...
Page 410
408 UNDERSTANDING YOUR INSTRUMENT PANEL • Passive Entry — If Equipped NOTE: The seat will return to the memorized seat location (if Personal Settings Linked To Key Fob is set to This feature allows you to lock and unlock the vehicles ON) when the Remote Keyless Entry (RKE) transmitter is door(s) without having to push the Remote Keyless Entry used to unlock the door.
Page 411
UNDERSTANDING YOUR INSTRUMENT PANEL 409 turn ON. To make your selection, press the “Auto Heated 10 minutes after the ignition is cycled to OFF. Opening Seats” button on the touchscreen, then select either “Off,” either front door will cancel this feature. To change the “Remote Start”...
Page 412
Press the box next to your selection and a Suspension Warnings will be displayed. check-mark appears next to the feature showing the • Automatic Aero Mode (1500 Model Only) system has been activated or the check-mark is removed When this feature is selected the Ride Height will auto- showing the system has been deactivated.
Page 413
UNDERSTANDING YOUR INSTRUMENT PANEL 411 • Transport Mode • Trailer Select When this feature is selected the air suspension system When this feature is selected, the Trailer Type can be lowers and then disables to assist with flat bed towing. selected between “Trailer 1,”...
Page 414
412 UNDERSTANDING YOUR INSTRUMENT PANEL Audio press the “Speed Adjusted Volume” button on the touch- screen and select from “Off,” “1,” “2” or “3” buttons on After pressing the “Audio” button on the touchscreen the the touchscreen. following settings will be available: •...
Page 415
UNDERSTANDING YOUR INSTRUMENT PANEL 413 • Tune Start Phone/Bluetooth After pressing the “Phone/Bluetooth” button on the Tune Start begins playing the current song from the touchscreen the following settings will be available: beginning when you tune to a music channel using one of the twelve presets, so you can enjoy the complete song.
Page 416
414 UNDERSTANDING YOUR INSTRUMENT PANEL touchscreen, select the channels you would like to skip Restore Settings followed by pressing the back arrow button on the After pressing the “Restore Settings” button on the touchscreen. touchscreen the following settings will be available: •...
UNDERSTANDING YOUR INSTRUMENT PANEL 415 Clear Personal Data System Information After pressing the “Clear Personal Data” button on the After pressing the “System Information” button on the touchscreen the following settings will be available: touchscreen the following settings will be available: •...
416 UNDERSTANDING YOUR INSTRUMENT PANEL iPod/USB/MP3 CONTROL — IF EQUIPPED Located inside the center console upper lid, this feature allows an iPod or external USB device to be plugged into the USB port. iPod control supports Mini, 4G, Photo, Nano, 5G iPod and iPhone devices.
UNDERSTANDING YOUR INSTRUMENT PANEL 417 STEERING WHEEL AUDIO CONTROLS — IF The right hand control is a rocker type switch with a EQUIPPED push-button in the center. Pushing the top of the switch will increase the volume, and pushing the bottom of the The remote sound system controls are located on the back switch will decrease the volume.
418 UNDERSTANDING YOUR INSTRUMENT PANEL The button located in the center of the left hand control 2. If the disc is stained, clean the surface with a soft cloth, will tune to the next pre-set station that you have wiping from center to edge. programmed in the radio pre-set buttons.
UNDERSTANDING YOUR INSTRUMENT PANEL 419 RADIO OPERATION AND MOBILE DEVICES Nevertheless, the wireless radio will be used in such a manner that the radio is 20 cm or further from the human Under certain conditions, the mobile device being on in body.
420 UNDERSTANDING YOUR INSTRUMENT PANEL This device complies with Part 15 of the FCC Rules and communications. However, there is no guarantee that with Industry Canada license-exempt RSS standard(s). interference will not occur in a particular installation. Operation is subject to the following two conditions: •...
UNDERSTANDING YOUR INSTRUMENT PANEL 421 Manual Climate Controls Without Touchscreen — If Equipped The controls for the manual heating and air conditioning system in this vehicle consist of a series of outer rotary dials and inner push knobs. These comfort controls can be set to obtain desired interior conditions.
Page 424
422 UNDERSTANDING YOUR INSTRUMENT PANEL Front Blower Control Temperature Control There are seven blower speeds. Use Use this control to regulate the tem- this control to regulate the amount of perature of the air inside the passenger air forced through the system in any compartment.
Page 425
UNDERSTANDING YOUR INSTRUMENT PANEL 423 MAX A/C Mode Control (Air Direction) For maximum cooling, when MAX A/C is selected the A/C is turned on automatically and the air is Mode control allows you to choose recirculated. from several patterns of air distribu- tion.
Page 426
424 UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode Mix Mode Air is directed through the panel and floor outlets. Air is directed through the floor, defrost and side window demist outlets. This setting works best in cold or snowy conditions that require extra heat at the NOTE: There is a difference in temperature (in any windshield.
Page 427
UNDERSTANDING YOUR INSTRUMENT PANEL 425 • Continuous use of the Recirculation mode may make Recirculation Control the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. Push the Recirculation Control button to • In cold or damp weather, the use of the Recirculation choose between outside air intake or recircula- tion of the air inside the vehicle.
426 UNDERSTANDING YOUR INSTRUMENT PANEL Economy Mode Manual Climate Controls With Touchscreen — If Equipped If ECONOMY mode is desired, push the A/C button to turn off the LED indicator and the A/C compressor. Buttons On The Faceplate Rotate the temperature control knob to the desired tem- The buttons on the faceplate are located below the radio perature.
Page 429
UNDERSTANDING YOUR INSTRUMENT PANEL 427 Buttons On The Touchscreen Button Descriptions (Applies To Both Buttons On The Faceplate and Buttons On The Touchscreen) Buttons on the touchscreen are accessible on the radio. 1. MAX A/C Button Press and release to toggle between MAX A/C and the prior settings.
Page 430
428 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Recirculation Button (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster Press and release to change the current setting; the automatically turns off after 10 minutes. indicator illuminates when ON.
Page 431
UNDERSTANDING YOUR INSTRUMENT PANEL 429 6. Modes NOTE: BI-LEVEL mode is designed under comfort con- ditions to provide cooler air out of the panel outlets and The airflow distribution mode can be adjusted so air warmer air from the floor outlets. comes from the instrument panel outlets, floor outlets, •...
Page 432
430 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Blower Control 8. Climate Control OFF Button Blower control is used to regulate the amount of air Press and release this button to turn the Climate Control forced through the climate system. There are seven ON/OFF.
UNDERSTANDING YOUR INSTRUMENT PANEL 431 Recirculation Control Automatic Climate Controls With Touchscreen — If Equipped When outside air contains smoke, odors, or Buttons On The Faceplate high humidity, or if rapid cooling is desired, The buttons on the faceplate are located below the you may wish to recirculate interior air by Uconnect screen.
Page 434
432 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Touchscreen Buttons on the touchscreen are accessible on the Uconnect system screen. Uconnect 8.4 Automatic Temperature Controls — Buttons On The Touchscreen Button Descriptions (Applies To Both Buttons On The Faceplate And Buttons On The Touchscreen) Uconnect 5.0 Automatic Temperature Controls —...
Page 435
UNDERSTANDING YOUR INSTRUMENT PANEL 433 this function again will cause the MAX A/C operation to 5. Front Defrost Button switch into manual mode and the MAX A/C indicator Press and release to change the current airflow setting to will turn off. Defrost mode.
Page 436
434 UNDERSTANDING YOUR INSTRUMENT PANEL temperature settings or on the touchscreen, press and CAUTION! slide the temperature bar towards the red arrow for warmer temperature settings. Failure to follow these cautions can cause damage to the heating elements: NOTE: Pressing this button while in Sync mode will •...
Page 437
UNDERSTANDING YOUR INSTRUMENT PANEL 435 when this feature is enabled. Sync is used to synchronize Button On The Touchscreen the passenger temperature setting with the driver tem- Use the small blower icon to reduce the blower setting perature setting. Changing the passenger temperature and the large blower icon to increase the blower setting.
Page 438
436 UNDERSTANDING YOUR INSTRUMENT PANEL • Mix Mode direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow Air comes from the floor, defrost and side from these outlets. window demist outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 437 14. Driver Temperature Control Up Button Climate Control Functions (Uconnect 8.4) A/C (Air Conditioning) Provides the driver with independent temperature con- The Air Conditioning (A/C) button allows the operator trol. Push the button on the faceplate button for warmer to manually activate or deactivate the air conditioning temperature settings or on the touchscreen, press and system.
Page 440
438 UNDERSTANDING YOUR INSTRUMENT PANEL • If fog or mist appears on the windshield or side glass, In MAX A/C, the blower level and mode position can be select Defrost mode and adjust blower speed if adjusted to desired user settings. Pressing other settings needed.
UNDERSTANDING YOUR INSTRUMENT PANEL 439 NOTE: In cold weather, use of Recirculation mode may Automatic Temperature Control (ATC) lead to excessive window fogging. The recirculation Automatic Operation feature may be unavailable (button on the touchscreen greyed out) if conditions exist that could create fogging 1.
Page 442
440 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Manual Operation Override • It is not necessary to move the temperature settings. The system allows for manual selection of blower speed, air distribution mode, A/C status and recirculation con- The system automatically adjusts the temperature, trol.
UNDERSTANDING YOUR INSTRUMENT PANEL 441 NOTE: Each of these features operates independently Winter Operation from each other. If any feature is controlled manually, To ensure the best possible heater and defroster perfor- temperature control will continue to operate automati- mance, make sure the engine cooling system is function- cally.
Page 444
442 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging and Frosting Outside Air Intake Vehicle windows tend to fog on the inside of the glass in Make sure the air intake, located directly in front of the mild, rainy and/or humid weather. Windows may frost windshield, is free of obstructions such as leaves.
Page 445
UNDERSTANDING YOUR INSTRUMENT PANEL 443 Control Setting Suggestions For Various Weather Conditions Operating Tips Chart...
444 UNDERSTANDING YOUR INSTRUMENT PANEL PERSONALIZED MENU BAR 1. Press the “Apps ” button to open the App screen. The Uconnect features and services in the main menu bar 2. Press and hold, then drag the selected App to replace are easily changed for your convenience.
446 UNDERSTANDING YOUR INSTRUMENT PANEL Get Started 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing in- structions. 2. Reduce background noise. Wind and passenger con- versations are examples of noise that may impact recognition.
UNDERSTANDING YOUR INSTRUMENT PANEL 447 Two buttons are all you need to control your Uconnect Basic Voice Commands system with your voice. The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button .
UNDERSTANDING YOUR INSTRUMENT PANEL 449 Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear. (Subscrip- tion or included SiriusXM Satellite Radio trial required.) Push the VR button . After the beep, say •...
450 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.” The system will provide you with a list of commands. Uconnect 8.4A/8.4AN Radio Media Uconnect offers connections via USB, SD, Bluetooth and...
Page 453
UNDERSTANDING YOUR INSTRUMENT PANEL 451 Push the VR button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist. • Change source to Bluetooth • Change source to iPod •...
452 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook button is illumi- nated for the Uconnect 5.0 and 8.4A/AN radios, your system is ready. Check UconnectPhone.com for mobile phone compatibility and pairing instructions. Push the Phone button .
UNDERSTANDING YOUR INSTRUMENT PANEL 453 TIP: When providing a Voice Command, push the Phone button and say “Call,” then pronounce the name exactly as it appears in your phone book. When a contact has multiple phone numbers, you can say “Call John Smith work.”...
Page 456
454 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Once an incoming text message is read to you, push PRE-DEFINED VOICE TEXT REPLY RESPONSES the Phone button . After the beep, say: “Reply.” Yes. Stuck in traffic. See you later. 2. Listen to the Uconnect prompts. After the beep, repeat Start without I’ll be late.
Page 457
UNDERSTANDING YOUR INSTRUMENT PANEL 455 Apple iPhone iOS 6 or later supports reading incoming text messages only. To enable this feature on your Apple iPhone, follow these 4 simple steps: iPhone Notification Settings 1 — Select “Settings” 2 — Select “Bluetooth” 3 —...
456 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Voice Text Reply is not compatible with iPhone, but TIP: Voice Command for Climate may only be used to if your vehicle is equipped with Siri Eyes Free, you can adjust the interior temperature of your vehicle. Voice use your voice to send a text message.
UNDERSTANDING YOUR INSTRUMENT PANEL 457 Navigation (8.4A/8.4AN) TIP: To start a POI search, push the VR button . After the beep, say: “ Find nearest coffee shop.” The Uconnect navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go.
458 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect Access (8.4A/8.4AN) NOTE: Uconnect Access is available only on equipped vehicles purchased within the continental United States, Alaska and Hawaii. Services can only be used where WARNING! coverage is available; see coverage map for details. ALWAYS obey traffic laws and pay attention to the 9-1-1 Call road.
UNDERSTANDING YOUR INSTRUMENT PANEL 459 WiFi Hotspot*** **If vehicle is equipped. ***Extra charges apply. Vehicle Health Alert Your vehicle will send you an email alert if it senses a problem under the hood with one of your vehicles key systems. For further information go to the Mopar Owner Connect website moparownerconnect.com.
460 UNDERSTANDING YOUR INSTRUMENT PANEL Signing up is easy! Simply follow the steps above. Or, press the “Apps ” button on the touchscreen to “Register By Web” to complete the process using your smartphone or computer. For further information please visit DriveUconnect.com. Mobile App (8.4A/8.4AN) You’re only a few steps away from using remote com- mands and playing your favorite music in your vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 461 3. Press the app you’d like to connect to your vehicle. Voice Texting (8.4A/8.4AN) 4. Enter your login information for the selected app and 1. To send a message, push the Phone button . After press Link.
Page 464
462 UNDERSTANDING YOUR INSTRUMENT PANEL Apple iPhone iOS6 or later supports reading incoming text messages only. To enable this feature on your Apple iPhone, follow these 4 simple steps: iPhone Notification Settings 1 — Select “Settings” 2 — Select “Bluetooth” 3 —...
UNDERSTANDING YOUR INSTRUMENT PANEL 463 TIP: 1. Press the “Apps ” button on the touchscreen. • Voice Texting is not compatible with iPhone, but if 2. Press the “Yelp” button on the touchscreen. your vehicle is equipped with Siri Eyes Free, you can 3.
464 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Once you perform a search, you can reorganize the SiriusXM Travel Link (8.4A/8.4AN) results by selecting either the Best Match, Rating or Need to find a gas station, view local movie listings, Distance tab on the top of the touchscreen display. check a sports score or the 5 - day weather forecast? SiriusXM Travel Link is a suite of services that brings a wealth of information right to your Uconnect 8.4AN...
UNDERSTANDING YOUR INSTRUMENT PANEL 465 TIP: Traffic alerts are not accessible with Voice Com- reminders, and more. For further information go to the mand. Mopar Owner Connect website moparownerconnect.com. Do Not Disturb With Do Not Disturb, you can disable notifications from incoming calls and texts, allowing you to keep your eyes on the road and hands on the wheel.
466 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Only the first 25 characters can been seen on the General Information touchscreen while typing a custom message. This device complies with FCC rules Part 15 and Industry While in Do Not Disturb, Conference Call can be selected Canada RSS-210.
Page 472
Equipped ......490 AIR SUSPENSION SYSTEM (1500 MODELS) — IF ▫ Six-Speed Automatic Transmission — 1500 Models EQUIPPED .
Page 473
STARTING AND OPERATING 471 ▫ Electronic Vehicle Information Center STABILIZER/SWAY BAR SYSTEM — POWER (EVIC)/Driver Information Display (DID) Display WAGON ONLY ......568 Messages .
Page 474
POWER STEERING .....613 ▫ Electric Power Steering — 1500 Models ..613 DRIVING THROUGH WATER ... . .591 ▫...
Page 475
STARTING AND OPERATING 473 ▫ Electronic Brake Force Distribution (EBD) ..620 ▫ Tire Identification Number (TIN)...640 ▫ Brake System Warning Light....620 ▫...
Page 476
474 STARTING AND OPERATING ▫ Life Of Tire ......658 ▫ 3.6L Engine ......675 ▫...
Page 477
▫ Loose Fuel Filler Cap Message ... .686 ▫ 1500 Models Only .....711 VEHICLE LOADING .
STARTING AND OPERATING 477 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both warned not to touch the parking brake, brake pedal inside and outside mirrors, and fasten your seat belt. or the gear selector. • Do not leave the Key Fob in or near the vehicle, or The starter should not be operated for more than 10- in a location accessible to children, and do not second intervals.
478 STARTING AND OPERATING within 10 seconds, cycle the ignition to the OFF position, Tip Start Feature wait five seconds, then repeat the “Normal Starting” Do not press the accelerator. Cycle the ignition switch procedure. briefly to the START position and release it. The starter motor will continue to run but will automatically disen- Automatic Transmission gage when the engine is running.
STARTING AND OPERATING 479 Normal Starting To Turn Off The Engine Using ENGINE START/STOP Button Using The ENGINE START/STOP Button 1. Place the gear selector in PARK, then push and release 1. The transmission must be in PARK or NEUTRAL. the ENGINE START/STOP button.
480 STARTING AND OPERATING NOTE: If the ignition switch is left in the ACC or RUN 4. Push the ENGINE START/STOP button a third time to (engine not running) position and the transmission is in return the ignition to the OFF position. PARK, the system will automatically time out after 30 Extreme Cold Weather (Below –22°F Or −30°C) minutes of inactivity and the ignition will switch to the...
Page 483
STARTING AND OPERATING 481 CAUTION! WARNING! (Continued) • If the vehicle has a discharged battery, booster To prevent damage to the starter, do not crank the cables may be used to obtain a start from a booster engine for more than 10 seconds at a time. Wait 10 to battery or the battery in another vehicle.
482 STARTING AND OPERATING After Starting To Activate The Autostop Mode, The Following Must Occur: The idle speed is controlled automatically and it will decrease as the engine warms up. 1. The system must be in STOP/START READY state. A STOP/START READY message will be displayed in STOP/START SYSTEM —...
STARTING AND OPERATING 483 • Cabin heating or cooling is in process and an accept- Autostop, the Climate Controls system may automati- cally adjust airflow to maintain cabin comfort. Customer able cabin temperature has not been achieved. settings will be maintained upon return to an engine •...
484 STARTING AND OPERATING • Low brake vacuum (e.g. after several brake pedal To Start The Engine While In Autostop Mode applications) While in DRIVE, the engine will start when the brake • STOP/START OFF switch is pushed pedal is released or the throttle pedal is depressed. The transmission will automatically reengage upon engine •...
STARTING AND OPERATING 485 The engine may then be restarted by moving the trans- mission shift selector out of PARK (e.g. to DRIVE) or, in some cases, only by a KEY START. The Electronic Vehicle Information Center (EVIC)/Driver Information Display (DID) will display a SHIFT OUT OF PARK message, or a STOP/START KEY START REQUIRED message, to indi- cate which action is required.
2. The light on the switch will turn off. 1500 Models System Malfunction The engine block heater cord is routed under the hood on If there is a malfunction in the STOP/START system, the the passenger side of the vehicle near the right head lamp system will not shut down the engine.
STARTING AND OPERATING 487 2500/3500 Models AUTOMATIC TRANSMISSION The engine block heater cord is routed through the grille CAUTION! by the right front tow hook. Damage to the transmission may occur if the follow- It includes a removable cap that is secured by a tethered ing precautions are not observed: strap.
Page 490
488 STARTING AND OPERATING WARNING! WARNING! (Continued) LOCK/OFF (key removal) position, an automatic • It is dangerous to shift out of PARK or NEUTRAL transmission is locked in PARK, securing the ve- if the engine speed is higher than idle speed. If hicle against unwanted movement.
STARTING AND OPERATING 489 Key Ignition Park Interlock WARNING! (Continued) This vehicle is equipped with a Key Ignition Park Inter- brake pedal released. Make sure the transmission lock which requires the transmission to be in PARK is in PARK before leaving the vehicle. before the ignition switch can be turned to the LOCK/ •...
490 STARTING AND OPERATING the transmission out of PARK, the ignition switch must REVERSE, when the vehicle is stopped or moving at low be turned to the ON/RUN position (engine running, for speeds (refer to “Brake/Transmission Shift Interlock Sys- vehicles with eight-speed transmission) and the brake tem”...
Page 493
STARTING AND OPERATING 491 The transmission gear selector has only PARK, RE- VERSE, NEUTRAL, and DRIVE positions. Manual down- shifts can be made using the Electronic Range Select (ERS) shift control (refer to Electronic Range Select (ERS) Operation in this section for further information). Press- ing the GEAR-/GEAR+ switches (on the steering wheel) while in the DRIVE position will select the highest available transmission gear, and will display that gear...
Page 494
492 STARTING AND OPERATING NOTE: After selecting any gear range, wait a moment to NOTE: On four-wheel drive vehicles be sure that the allow the selected gear to engage before accelerating. transfer case is in a drive position. This is especially important when the engine is cold. WARNING! PARK (P) •...
Page 495
STARTING AND OPERATING 493 WARNING! (Continued) WARNING! (Continued) • When leaving the vehicle, always make sure the the engine is idling normally and your foot is firmly pressing the brake pedal. ignition is in the OFF position, remove the key fob •...
Page 496
494 STARTING AND OPERATING REVERSE (R) CAUTION! This range is for moving the vehicle backward. Shift into • DO NOT race the engine when shifting from REVERSE only after the vehicle has come to a complete PARK or NEUTRAL into another gear range, as this stop.
Page 497
STARTING AND OPERATING 495 When frequent transmission shifting occurs (such as CAUTION! when operating the vehicle under heavy loading condi- tions, in hilly terrain, traveling into strong head winds, or Towing the vehicle, coasting, or driving for any other while towing a heavy trailer), select TOW/HAUL mode reason with the transmission in NEUTRAL can cause or use the Electronic Range Select (ERS) shift control severe transmission damage.
Page 498
496 STARTING AND OPERATING result in transmission damage, Transmission Limp Home 1. Stop the vehicle. Mode is activated. In this mode, the transmission may 2. Shift the transmission into PARK, if possible. If not, operate only in certain gears, or may not shift at all. shift the transmission to NEUTRAL.
Page 499
STARTING AND OPERATING 497 If the transmission cannot be reset, authorized dealer that gear as the top available gear. Once in ERS mode, service is required. tapping the GEAR- or GEAR+ switch will change the top available gear. Electronic Range Select (ERS) Operation — Eight-Speed Transmission The Electronic Range Select (ERS) shift control allows the driver to limit the highest available gear when the...
Page 500
498 STARTING AND OPERATING To exit ERS mode, simply push and hold the GEAR+ switch until the gear limit display disappears from the instrument cluster. WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury.
(kilometers). Six-Speed Automatic Transmission — 1500 Only shift from DRIVE to PARK or REVERSE when the Models Only (If Equipped) accelerator pedal is released and the vehicle is stopped.
Page 502
500 STARTING AND OPERATING with the Driver Information Display (DID) will display When parking on a level surface, you may shift the both the selected gear limit, and the actual current gear, transmission into PARK first, and then apply the parking while in ERS mode.
Page 503
STARTING AND OPERATING 501 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure fully when parked to guard against vehicle move- those in or near the vehicle. As with all vehicles, ment and possible injury or damage. •...
Page 504
502 STARTING AND OPERATING WARNING! (Continued) CAUTION! • When leaving the vehicle, always make sure the • Before moving the gear selector out of PARK, you ignition is in the OFF position, remove the Key Fob must turn the ignition switch from the LOCK/OFF from the vehicle, and lock the vehicle.
Page 505
STARTING AND OPERATING 503 • Release the gear selector and make sure it is fully WARNING! seated in the PARK gate. Do not coast in NEUTRAL and never turn off the • Look at the transmission gear position display and ignition to coast down a hill.
Page 506
504 STARTING AND OPERATING DRIVE (D) Select (ERS) Operation” in this section for further infor- mation) to select a lower gear range. Under these condi- This range should be used for most city and highway tions, using a lower gear range will improve performance driving.
Page 507
STARTING AND OPERATING 505 NOTE: Use caution when operating a heavily loaded direct gears only. Normal operation will resume once the vehicle at low speeds (such as towing a trailer up a steep transmission temperature has risen to a suitable level. grade, or in stop-and-go traffic) during hot weather.
Page 508
506 STARTING AND OPERATING 2. Shift the transmission into PARK. Electronic Range Select (ERS) Operation — Six-Speed Transmission (1500 Models Only) 3. Turn the ignition switch to the OFF position. The Electronic Range Select (ERS) shift control allows the 4. Wait approximately 10 seconds.
Page 509
STARTING AND OPERATING 507 You can switch between DRIVE and ERS mode at any vehicle speed. When the gear selector is in the DRIVE position, the transmission will operate automatically, shifting between all available gears. Tapping the ERS (-) switch (column shift) or tapping the gear selector to the left (-) (console shift) will activate ERS mode, display the current gear in the instrument cluster, and set that gear as the top available gear.
Page 510
508 STARTING AND OPERATING WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. NOTE: To select the proper gear position for maximum deceleration (engine braking), simply press and hold the gear selector to the left (-) (console shift) or the ERS (-) switch down (column shift).
Page 511
STARTING AND OPERATING 509 • vehicle speed is sufficiently high, CAUTION! • the TOW/HAUL switch has not been activated, and When using ERS for engine braking while descend- • the driver is not heavily pressing the accelerator. ing steep grades, be careful not to overspeed the engine.
Page 512
510 STARTING AND OPERATING desired, the switch must be pushed each time the engine is started. WARNING! Do not use the “TOW/HAUL” feature when driving in icy or slippery conditions. The increased engine braking can cause the rear wheels to slide, and the vehicle to swing around with the possible loss of vehicle control, which may cause an accident possi- bly resulting in personal injury or death.
STARTING AND OPERATING 511 the upper gears. When the vehicle speed drops or during fluid partially draining from the torque converter into some accelerations, the clutch automatically disengages. the transmission. This condition is normal and will not cause damage to the transmission. The torque con- NOTE: verter will refill within five seconds after starting the •...
Page 514
512 STARTING AND OPERATING The electronically-controlled transmission provides a with the Driver Information Display (DID) will display precise shift schedule. The transmission electronics are both the selected gear limit, and the actual current gear, self-calibrating; therefore, the first few shifts on a new while in ERS mode.
Page 515
STARTING AND OPERATING 513 When parking on a level surface, you may shift the WARNING! (Continued) transmission into PARK first, and then apply the parking fully when parked to guard against vehicle move- brake. ment and possible injury or damage. When parking on a hill, apply the parking brake before •...
Page 516
514 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • When leaving the vehicle, always make sure the those in or near the vehicle. As with all vehicles, ignition is in the OFF position, remove the Key Fob you should never exit a vehicle while the engine is from the vehicle, and lock the vehicle.
Page 517
STARTING AND OPERATING 515 • Release the gear selector and make sure it is fully CAUTION! seated in the PARK gate. • Before moving the gear selector out of PARK, you • Look at the transmission gear position display and must turn the ignition switch from the LOCK/OFF verify that it indicates the PARK position (P).
Page 518
516 STARTING AND OPERATING DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the smoothest upshifts and down- ignition to coast down a hill. These are unsafe shifts, and the best fuel economy.
Page 519
STARTING AND OPERATING 517 If the transmission temperature exceeds normal operat- During cold temperatures, transmission operation may ing limits, the powertrain controller will modify the be modified depending on engine and transmission transmission shift schedule and expand the range of temperature as well as vehicle speed.
Page 520
518 STARTING AND OPERATING selected. PARK, REVERSE, and NEUTRAL will continue NOTE: Even if the transmission can be reset, we recom- to operate. The Malfunction Indicator Light (MIL) may be mend that you visit your authorized dealer at your illuminated. Limp Home Mode allows the vehicle to be earliest possible convenience.
Page 521
STARTING AND OPERATING 519 shifting between all available gears. Tapping the ERS (-) To exit ERS mode, simply push and hold the ERS (+) switch will activate ERS mode, display the current gear in switch until the gear limit display disappears from the the instrument cluster, and set that gear as the top instrument cluster.
Page 522
520 STARTING AND OPERATING • Vehicle speed is sufficiently high. CAUTION! • The TOW/HAUL switch has not been activated. When using ERS for engine braking while descend- • The driver is not heavily pressing the accelerator. ing steep grades, be careful not to overspeed the engine.
Page 523
STARTING AND OPERATING 521 WARNING! Do not use the “TOW/HAUL” feature when driving in icy or slippery conditions. The increased engine braking can cause the rear wheels to slide, and the vehicle to swing around with the possible loss of vehicle control, which may cause an accident possi- bly resulting in personal injury or death.
522 STARTING AND OPERATING NOTE: cause damage to the transmission. The torque con- verter will refill within five seconds after starting the • The torque converter clutch will not engage, until the engine. transmission fluid and engine coolant are warm [usu- ally after 1 to 3 miles (2 to 5 km) of driving].
Page 525
STARTING AND OPERATING 523 • Neutral (N) The “Transfer Case Position Indicator Light” in the instrument cluster will alert the driver that the vehicle is • Four-wheel drive low range (4L) in four-wheel drive and that the front and rear drive- This transfer case is intended to be driven in the 2H shafts are locked together.
Page 526
524 STARTING AND OPERATING NOTE: Do not attempt to make a shift while only the WARNING! (Continued) front or rear wheels are spinning. The front and rear NEUTRAL position without first fully engaging the driveshaft speeds must be equal for the shift to take parking brake.
Page 527
STARTING AND OPERATING 525 traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h). Four-Wheel Drive High Range — This range locks the front and rear driveshafts together forcing the front and CAUTION! rear wheels to rotate at the same speed.
526 STARTING AND OPERATING 2H Or 4H To 4L alignment and shift completion to occur. The preferred method is with the vehicle rolling 2 to 3 mph (3 to With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift 5 km/h).
Page 529
STARTING AND OPERATING 527 • Neutral (NEUTRAL) This electronically shifted transfer case is designed to be driven in the two-wheel drive position (2WD) for normal street and highway conditions on dry, hard surfaced roads. When additional traction is required, the transfer case 4WD LOCK and 4WD LOW positions can be used to maximize torque to the front driveshaft, forcing the front and rear wheels to rotate at the same speed.
Page 530
528 STARTING AND OPERATING NOTE: The transfer case NEUTRAL position is selected 3. When the shift is complete, the indicator light for the by pushing the button located on the lower left hand selected position will stop flashing and remain ON. corner of the 4WD Control Switch.
Page 531
STARTING AND OPERATING 529 The “SVC 4WD Warning Light” monitors the electronic 4WD LOCK positions at a given road speed. Take care shift four-wheel drive system. If this light remains on not to overspeed the engine and do not exceed 25 mph after engine start up or illuminates during driving, it (40 km/h).
Page 532
530 STARTING AND OPERATING 4WD LOW WARNING! (Continued) Four-Wheel Drive Low Range — This range provides low disengages both the front and rear drive shafts from speed four-wheel drive. It maximizes torque to the front the powertrain and will allow the vehicle to roll, driveshaft, forcing the front and rear wheels to rotate at even if the transmission is in PARK.
Page 533
STARTING AND OPERATING 531 Shifting Procedure When the shift is complete, the position indicator light for the selected position will stop flashing and remain NOTE: • If any of the requirements to select a new transfer case 2WD To 4WD LOCK position have not been met, the transfer case will not Rotate the 4WD control switch to the desired position.
Page 534
532 STARTING AND OPERATING NOTE: The four-wheel drive system will not allow shifts 2. Shift the transmission into NEUTRAL. between 2WD/4WD LOCK if the front and/or rear 3. While still rolling, rotate the transfer case control wheels are spinning (no traction). In this situation, the switch to the desired position.
STARTING AND OPERATING 533 NOTE: • If Steps 1 or 2 of either the Preferred or Alternate Procedure are not satisfied prior to attempting the shift, then the desired position indicator light will flash continuously while the original position indicator light is ON, until all requirements have been met.
Page 536
534 STARTING AND OPERATING • Four-wheel drive low range (4WD LOW) and rear wheels to rotate at the same speed. This is accomplished by rotating the 4WD Control Switch to the • Neutral (NEUTRAL) desired position. This electronically shifted transfer case is designed to be Refer to “Shifting Procedure”...
Page 537
STARTING AND OPERATING 535 Transfer Case Position Indicator Lights 2. The newly selected position indicator light will con- tinue to flash. The Transfer Case Position Indicator Lights (4WD, 4LOW, and 4WD AUTO) are located in the instrument 3. The transfer case will not shift. cluster and indicate the current and desired transfer case NOTE: Before retrying a selection, make certain that all selection.
Page 538
536 STARTING AND OPERATING Proper operation of four-wheel drive vehicles depends WARNING! on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the Always engage the parking brake when powering drivetrain.
Page 539
STARTING AND OPERATING 537 For additional information on the appropriate use of each 4WD LOW transfer case mode position, see the information below: Four - Wheel Drive Low Range - This range provides low speed four-wheel drive. It maximizes torque to the front driveshaft , forcing the front and rear wheels to rotate at Rear-Wheel Drive High Range - This range is for normal the same speed.
538 STARTING AND OPERATING • If all the requirements to select a new transfer case Shifting Procedure position have been met, the current position indicator NOTE: light will turn OFF, the selected position indicator light • If any of the requirements to select a new transfer case will flash until the transfer case completes the shift.
Page 541
STARTING AND OPERATING 539 • Four-wheel drive lock range (4WD LOCK) • Four-wheel drive low range (4WD LOW) • Neutral (NEUTRAL) This electronically shifted transfer case is designed to be driven in the two–wheel drive position (2WD) or four- wheel drive position (4WD AUTO) for normal street and highway conditions on dry hard surfaced roads).
Page 542
540 STARTING AND OPERATING When additional traction is required, the transfer case NOTE: The transfer case NEUTRAL position is selected 4WD LOCK and 4WD LOW positions can be used to by pushing the recessed button (with a ballpoint pen or maximize torque to the front driveshaft, forcing the front similar object) located in the center of the 4WD Control and rear wheels to rotate at the same speed.
Page 543
STARTING AND OPERATING 541 3. When the shift is complete, the indicator light for the after engine start up or illuminates during driving, it selected position will stop flashing and remain ON. means that the four-wheel drive system is not function- ing properly and that service is required.
Page 544
542 STARTING AND OPERATING AUTO or 4WD LOCK positions at a given road speed. WARNING! (Continued) Take care not to overspeed the engine and do not exceed disengages both the front and rear drive shafts from 25 mph (40 km/h). the powertrain and will allow the vehicle to roll, Proper operation of four-wheel drive vehicles depends even if the transmission is in PARK.
Page 545
STARTING AND OPERATING 543 4WD LOCK towing behind another vehicle. Refer to “Recreational Towing” in “Starting And Operating” for further infor- Four-Wheel Drive Lock Range - This range maximizes mation. torque to the front driveshaft, forcing the front and rear wheels to rotate at the same speed.
Page 546
544 STARTING AND OPERATING When the shift is complete, the position indicator light 2WD Or 4WD AUTO Or 4WD LOCK To 4WD LOW for the selected position will stop flashing and remain NOTE: When shifting into or out of 4WD LOW some gear noise may be heard.
NEUTRAL. position indicator lights will be on or flashing. 3. Push the desired position on the transfer case control AIR SUSPENSION SYSTEM (1500 MODELS) — IF switch. EQUIPPED 4. After the desired position indicator light is ON (not Description flashing), shift the transmission back into gear.
Page 548
546 STARTING AND OPERATING NOTE: The vehicle will automatically enter Aero Mode when the vehicle speed remains between 62 mph (100 km/h) and 66 mph (106 km/h) for greater than 20 seconds or if the vehicle speed exceeds 66 mph (106 km/h).
Page 549
STARTING AND OPERATING 547 will be automatically lowered to NRH. Off-Road 1 (DID)” in “Understanding Your Instrument Panel” for may not be available due to vehicle payload, an further information. EVIC/DID message will be displayed when this oc- curs. Refer to “Electronic Vehicle Information Center CAUTION! (EVIC) or Driver Information Display (DID)”...
Page 550
548 STARTING AND OPERATING speed remains between 30 mph (48 km/h) and 35 mph button once from the NRH while the vehicle speed is (56 km/h) for greater than 20 seconds or if the vehicle below 33 mph (53 km/h). Once the vehicle speed goes speed falls below 30 mph (48 km/h).
Page 551
STARTING AND OPERATING 549 NOTE: Entry/Exit mode may be achieved using your This system uses a lifting and lowering pattern which key fob for easier entry/loading. Refer to “A Word About keeps the headlights from incorrectly shining into on- Your Keys” in “Things To Know Before Starting Your coming traffic.
550 STARTING AND OPERATING NOTE: If equipped with a touch screen radio all to be disabled. Refer to “Electronic Vehicle Information enabling/disabling of air suspension features must be Center (EVIC) or Driver Information Display (DID)” in done through the radio. Refer to “Uconnect Settings” in “Understanding Your Instrument Panel”...
Page 553
STARTING AND OPERATING 551 NOTE: This mode is intended to be enabled with engine Driver Information Display (DID)” in “Understanding running. Your Instrument Panel” or “Uconnect Settings” in “Un- derstanding Your Instrument Panel” if equipped with a Wheel Alignment Mode touch screen radio for further information.
552 STARTING AND OPERATING Electronic Vehicle Information Center Operation (EVIC)/Driver Information Display (DID) Display Messages When the appropriate conditions exist, a message will appear in the EVIC/DID display. Refer to “Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID)” in “Understanding Your Instrument Panel”...
Page 555
STARTING AND OPERATING 553 The indicator lamps 3 through 6 will illuminate to show engine running, doors closed, speed below threshold, the current position of the vehicle. Flashing indicator etc). The “DOWN” button can be pushed multiple times, lamps will show a position which the system is working each push will lower the requested level by one position to achieve.
554 STARTING AND OPERATING • Entry/Exit Mode – Indicator lamp 3 will be illumi- AIR SUSPENSION SYSTEM (2500/3500 MODELS) nated when the vehicle is in Entry Exit Mode. Entry/ — IF EQUIPPED Exit mode can be requested up to 33 mph (53 km/h). Description If vehicle speed is reduced to, and kept below, 15 mph The air suspension system is a rear leveling ride height...
Page 557
STARTING AND OPERATING 555 including towing a trailer. After the “ALT TRAILER HEIGHT” button has been pushed, it will blink continu- ously until the trailer height has been achieved. The system requires that the ignition be in ON/RUN position or the engine running with zero vehicle speed for all user requested changes.
556 STARTING AND OPERATING Settings” in “Understanding Your Instrument Panel” if WARNING! equipped with a touch screen radio for further informa- tion. The air suspension system uses a high pressure volume of air to operate the system. To avoid per- NOTE: This mode is intended to be enabled with engine sonal injury or damage to the system, see your running.
STARTING AND OPERATING 557 Wheel Alignment Mode Your Instrument Panel” or “Uconnect Settings” in “Un- derstanding Your Instrument Panel” if equipped with a Before performing a wheel alignment this mode must be touch screen radio for further information. enabled. Refer to “Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID)”...
558 STARTING AND OPERATING • Wheel Alignment Mode – No indicator lamps will be Operation illuminated. Wheel Alignment Mode is disabled by Pushing the Trailer Mode button once, while at Normal driving the vehicle. Ride Height (NRH) will lower the vehicle to trailer level. AIR SUSPENSION SYSTEM (REBEL MODELS NOTE: The LED will continuously blink until vehicle ONLY) —...
Page 561
STARTING AND OPERATING 559 NOTE: The vehicle will automatically enter Aero Mode when the vehicle speed remains between 62 mph (100 km/h) and 66 mph (106 km/h) for greater than 20 seconds or if the vehicle speed exceeds 66 mph (106 km/h).
Page 562
560 STARTING AND OPERATING displayed when this occurs. Refer to “Electronic Ve- speed remains between 30 mph (48 km/h) and 35 mph hicle Information Center (EVIC) or Driver Information (56 km/h) for greater than 20 seconds or if the vehicle Display (DID)”...
Page 563
STARTING AND OPERATING 561 rear of the vehicle for easier loading and unloading of CAUTION! cargo. To enter Entry/Exit Mode, push the “Down” button twice from the NRH while the vehicle speed is When in ENTRY/EXIT setting, be aware of your below 33 mph (53 km/h).
562 STARTING AND OPERATING vehicle will move up first and then the front. When “Understanding Your Instrument Panel” for further in- lowering the vehicle, the front will move down first and formation. then the rear. WARNING! After the engine is turned off, it may be noticed that the air suspension system operates briefly, this is normal.
Page 565
STARTING AND OPERATING 563 Center (EVIC) or Driver Information Display (DID)” in (EVIC) or Driver Information Display (DID)” in “Under- “Understanding Your Instrument Panel” for further in- standing Your Instrument Panel” for further information. formation. NOTE: This mode is intended to be enabled with engine NOTE: This mode is intended to be enabled with engine running and all doors closed.
564 STARTING AND OPERATING Electronic Vehicle Information Center Pushing the “UP” button once will move the suspension (EVIC)/Driver Infromation Display (DID) Display one position higher from the current position, assuming all conditions are met (i.e. key in ON/RUN position, Messages engine running, speed below threshold, etc).
STARTING AND OPERATING 565 • Transport Mode – No indicator lamps will be illumi- and EVIC/DID messages will operate the same for automatic changes and user requested changes. nated. Transport Mode is disabled by driving the vehicle. • Off-Road (OR) – Indicator lamps 3, 4, 5 and 6 will be •...
Page 568
566 STARTING AND OPERATING be engaged during low-speed, extreme off-road situa- CAUTION! tions where one wheel is likely to not be in contact with • Do not lock the front or rear axle on hard surfaced the ground. It is not recommended to drive the vehicle with the differentials locked on pavement due to the roads.
Page 569
STARTING AND OPERATING 567 position, the rear axle is locked. In the FRONT/REAR NOTE: Left to right wheel speed difference may be LOCK position, the front and rear axles are locked. necessary to allow the axle to fully lock. If the indicator light is flashing after placing the switch in the REAR NOTE: Even when the axles are in the AXLE UNLOCK LOCK or FRONT/REAR LOCK position, drive the ve-...
568 STARTING AND OPERATING NOTE: The rear axle must be locked before the front axle STABILIZER/SWAY BAR SYSTEM — POWER will lock. WAGON ONLY Your vehicle is equipped with an electronic disconnecting To unlock the front axle; move the axle locker switch to stabilizer/sway bar.
Page 571
STARTING AND OPERATING 569 WARNING! Do not disconnect the stabilizer bar and drive on hard surfaced roads or at speeds above 18 mph (29 km/h), you may lose control of the vehicle, which could result in serious injury or death. The front stabilizer bar enhances vehicle stability and assists in maintaining control of the vehicle.
570 STARTING AND OPERATING to obtain the Off-Road position. The amber indicator WARNING! light will flash until the stabilizer/sway bar has been fully disconnected. If the stabilizer/sway bar will not return to On-Road mode, vehicle stability is reduced. Do not attempt to NOTE: The stabilizer/sway bar may be torque locked drive the vehicle over 18 mph (29 km/h).
Page 573
STARTING AND OPERATING 571 agency to determine the designated off-road vehicle ramp without lifting any other wheel off the ground. This (ORV) trails or recreation areas. You should always tread distance up the ramp divided by the wheelbase of the lightly and only use established roads, trails or ORV vehicle and multiplied by 1,000 is the RTI.
Page 574
572 STARTING AND OPERATING conditions: hard packed dirt, gravel, rocks, grass, sand, CAUTION! mud, snow and ice. Every surface has a different effect on your vehicle’s steering, handling and traction. Control- The door sill height is 25 inches (63.5 cm). Water may ling your vehicle is one of the keys to successful off-road intrude into the interior of the vehicle at greater driving, so always keep a firm grip on the steering wheel...
STARTING AND OPERATING 573 Driving In Snow, Mud And Sand WARNING! There is a drastic reduction in traction when driving in Always wear your seat belt and firmly tie down snow, mud or sand. The vehicle will be less responsive to cargo.
Page 576
574 STARTING AND OPERATING • Sand – Soft sand is very difficult to travel through with CAUTION! full tire pressure. When crossing soft sandy spots in a trail maintain your vehicle’s momentum and do not On icy or slippery roads, do not downshift at high stop.
STARTING AND OPERATING 575 throttle lightly while holding a light brake pressure and CAUTION! ease the vehicle up and over the object. Reduced tire pressures may cause tire unseating and WARNING! total loss of air pressure. To reduce the risk of tire unseating, while at a reduced tire pressure, reduce Crossing obstacles can cause abrupt steering system your speed and avoid sharp turns or abrupt maneu-...
Page 578
576 STARTING AND OPERATING Crossing Large Rocks vehicle’s mobility. Approach these obstacles at a 45- degree angle and let each tire go through the obstacle When approaching large rocks, choose a path which independently. You need to use caution when crossing ensures you drive over the largest with your tires.
STARTING AND OPERATING 577 Crossing Logs what is the best direction to recover the vehicle. Depend- ing on what you are in contact with, jack the vehicle up To cross a log, approach it at a slight angle (approxi- and place a few rocks under the tires so the weight is off mately 10 to 15 degrees).
Page 580
578 STARTING AND OPERATING feel confident with the vehicle and your abilities. You apply more power as you start up the hill. Do not race should always climb hills straight up and down. Never forward into a steep grade, the abrupt change of grade attempt to climb a hill on an angle.
Page 581
STARTING AND OPERATING 579 descent and apply your brakes if necessary, but do not WARNING! allow the tires to lock. Never attempt to climb a hill at an angle or turn WARNING! around on a steep grade. Driving across an incline increases the risk of a roll over, which may result in Do not descend a steep grade in NEUTRAL.
580 STARTING AND OPERATING WARNING! WARNING! Driving across an incline increases the risk of a If the engine stalls or you lose headway or cannot rollover, which may result in severe injury. make it to the top of a steep hill or grade, never attempt to turn around.
Page 583
STARTING AND OPERATING 581 avoid damage to the environment. You should know CAUTION! your vehicle’s abilities and be able to recover it if something goes wrong. You should never stop or shut a Water ingestion into the axles, transmission, transfer vehicle off when crossing deep water unless you ingested case, engine or vehicle interior can occur if you drive water into the engine air intake.
Page 584
582 STARTING AND OPERATING crossing is the water depth, current and bottom con- CAUTION! ditions. On soft bottoms the vehicle will sink in, effectively increasing the water level on the vehicle. Be Muddy waters can reduce the cooling system effec- sure to consider this when determining the depth and tiveness by depositing debris onto the radiator.
STARTING AND OPERATING 583 downstream out of control if the water is deep enough Airing Down For Off-Road Driving to push on the large surface area of the vehicle’s body. Running lower tire pressure off-road can improve your Before you proceed determine the speed of the current, ride comfort and vehicle traction.
584 STARTING AND OPERATING vehicle? Is there an anchor point to winch to? Are you CAUTION! alone or do you have another vehicle to help? Is there high risk of vehicle damage during the recovery process? Reduced tire pressure increases the risk of tire dam- Answering these questions will help you determine the age and may cause tire unseating with total loss of air best method of recovery.
Page 587
STARTING AND OPERATING 585 shift. If after a few rock cycles your vehicle is not free, CAUTION! stop and try another method of recovery. Continuous rock cycling will only cause unnecessary damage to Pulling the vehicle off an obstacle, without first your vehicle and the environment.
Page 588
586 STARTING AND OPERATING a safe recovery. First connect the tow strap to the driver. This sequence is important to avoid having the correct attachment points on both vehicles. There recovered vehicle hit the pulling vehicle. should be a least 20 to 30 feet (6 to 9 meters) between the vehicles to allow for a safe recovery.
Page 589
STARTING AND OPERATING 587 recover the vehicle, there is a high risk of environmen- floor mat or something else over the strung out cable. tal or vehicle damage, or where nothing else seems to Placing something over the strung out cable helps work.
588 STARTING AND OPERATING • Check for accumulations of plants or brush. These After Driving Off-Road things could be a fire hazard. They might hide damage Off-road operation puts more stress on your vehicle than to fuel lines, brake hoses, axle pinion seals, and does most on-road driving.
STARTING AND OPERATING 589 • If you experience unusual vibration after driving in will supply maximum traction. When starting with only mud, slush or similar conditions, check the wheels for one rear wheel on an excessively slippery surface, slight impacted material. Impacted material can cause a momentary application of the parking brake may be wheel imbalance and freeing the wheels of it will necessary to gain maximum traction.
590 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
STARTING AND OPERATING 591 Your vehicle may be equipped with a Limited Slip WARNING! (Continued) Differential (LSD) that reduces, but does not eliminate, your vehicle away swiftly. Failure to follow this the amount of wheel slip across a given axle for im- warning may result in injuries that are serious or proved handling.
Page 594
592 STARTING AND OPERATING WARNING! (Continued) CAUTION! (Continued) • Do not exceed 5 mph (8 km/h) when driving distances. Therefore, after driving through stand- ing water, drive slowly and lightly press on the through standing water. This will minimize wave brake pedal several times to dry the brakes.
STARTING AND OPERATING 593 OFF-ROAD DRIVING TIPS always a good idea to check for damage. That way you can get any problems taken care of right away and have Care should be taken when attempting to climb steep your vehicle ready when you need it. hills or driving diagonally across a hill or slope.
594 STARTING AND OPERATING • After extended operation in mud, sand, water, or WINCH USAGE — POWER WAGON ONLY — similar dirty conditions, have the radiator, fan, brake (IF EQUIPPED) rotors, wheels, brake linings, and axle yokes inspected Things To Know Before Using Your Winch and cleaned as soon as possible.
Page 597
STARTING AND OPERATING 595 2. Attach the hook to a suitable anchor point. Low Voltage Interrupt Your winch is equipped with a device that will interrupt CAUTION! winch function if the vehicle charging system voltage drops to a low level. The winch will not power-in or out Be certain the anchor will withstand the load re- for 30 seconds if this device is tripped.
596 STARTING AND OPERATING Understanding The Features Of Your Winch Winch Components...
Page 599
STARTING AND OPERATING 597 1. Motor: The winch motor is powered by the vehicle 6. Clutch Lever: The clutch lever allows the winch drum charging system and features a thermal protection to be disconnected from the winch motor to allow the switch that automatically stops motor function in the wire rope to be pulled from the winch by hand.
598 STARTING AND OPERATING Winch Accessories damaging the wire rope. Proper use of the snatch block is covered in Before You Pull. The following accessories are necessary to attach the winch to anchors, change direction of pull, and for safe Clevis/D-Shackles: The D-Shackle is a safe winching.
STARTING AND OPERATING 599 Operating Your Winch WARNING! (Continued) • Always stand clear of wire rope and load and keep WARNING! others away during winching. • Always keep hands and clothing clear of the wire Failure to observe any of these warnings regarding proper winch usage may result in severe injury.
Page 602
600 STARTING AND OPERATING • Use the right equipment for the situation. WARNING! (Continued) • Always wear leather gloves and do not allow the wire • Always disconnect the remote control when not in rope to slip through your hands when handling the use.
Page 603
STARTING AND OPERATING 601 1. Inspect the winch, winch mount, and wire rope for CAUTION! (Continued) damage. Do not use the winch if the mount is loose or • Always inspect winch installation and wire rope rope shows excessive wear or damage. condition before operating the winch.
Page 604
602 STARTING AND OPERATING 3. Disengage the clutch to allow free spooling of the winch drum, rotate the clutch lever on the winch to disengage. Freespooling conserves battery power. Hook Strap 5. Pull the wire to the anchor point. Pull out enough wire rope to reach your anchor point.
Page 605
STARTING AND OPERATING 603 Pulling Wire Rope Tree Trunk Protector 6. Secure to the anchor point. Once you have established CAUTION! your anchor point, secure the tree-trunk protector or choker-chain around the object. Always be certain the anchor you select will with- stand the load.
Page 606
604 STARTING AND OPERATING NOTE: How to choose an anchor point: A secure anchor is critical to winching operations. An anchor must be strong enough to hold while winching. Natural anchors include trees, stumps and rocks. Hook the cable as low as possible.
Page 607
STARTING AND OPERATING 605 9. Connect the remote control to the winch control box, located behind the front bumper. Be careful not to let the remote control cord dangle in front of the winch. If you choose to control the winch from inside your vehicle, always pass the remote through a window to avoid pinching the cord in the door.
Page 608
606 STARTING AND OPERATING Pulling Wire Rope Under Tension Wire Neatly Wound Around The Spooling Drum 11. Check your anchor. Make sure all connections are In certain situations you may decide to throw a heavy secured and free of debris before continuing with the blanket or similar object over the wire rope.
Page 609
STARTING AND OPERATING 607 tension is applied. Do not allow it to get pulled into the fairlead. If it is necessary to move or remove the blanket, slack the tension on the wire rope first. 13. Establish no people zones: Make your intentions clear.
Page 610
608 STARTING AND OPERATING 14. Begin winching. With the winching vehicles engine on and light tension already on the wire rope, begin winching slowly and steadily. Be sure that the wire rope is winding evenly and tightly around the spool- ing drum.
Page 611
STARTING AND OPERATING 609 NOTE: an uneven stack, spool out that section of the rope and reposition it to the opposite end of the drum, • Avoid overheating the winch motor. For extended which will free up space for continued winching. winching, stop at reasonable intervals to allow the winch motor to cool down.
Page 612
610 STARTING AND OPERATING NOTE: How to spool under no load: Arrange the re- mote control lead so it cannot be caught in the winch. Arrange the wire rope so it will not kink or tangle when spooled. Be sure any wire rope already on the spooling drum is wound tightly and evenly layered.
STARTING AND OPERATING 611 NOTE: Always store the remote control in a protected, clean, dry area. Rigging Techniques Various winching situations will require application of other winching techniques. These could range from too little distance to achieve maximum pull using straight line rigging, simply increasing pulling power, or main- taining a straight-line pulling situation.
Page 614
612 STARTING AND OPERATING How To Change The Pulling Direction All winching operations should have a straight line from the winch to the object being pulled. This minimizes the wire rope collecting on one side of the drum affecting pulling efficiency and damaging wire rope. A snatch block, secured to a point directly in front of the vehicle will enable you to change your pulling direction while still allowing the wire rope to be at 90°...
(tighten and back-off 1/2 turn). POWER STEERING Electric Power Steering — 1500 Models The electric power steering system will give you good Wire Rope Routing vehicle response and increased ease of maneuverability Because pulling power decreases with the number of in tight spaces.
Page 616
614 STARTING AND OPERATING the electric steering system experiences a fault that If the Steering icon is displayed and the “SERVICE prevents it from providing assist, you will still have the POWER STEERING – ASSIST OFF” message is displayed ability to steer the vehicle manually. the EVIC/DID screen, they indicate the vehicle needs to be taken to the dealer for service.
STARTING AND OPERATING 615 Hydraulic Power Steering — 2500/3500 Models system. This noise should be considered normal, and it does not in any way damage the steering system. The standard power steering system will give you good vehicle response and increased ease of maneuverability CAUTION! in tight spaces.
616 STARTING AND OPERATING FUEL SAVER TECHNOLOGY 5.7L/6.4L ENGINES CAUTION! ONLY — IF EQUIPPED Do not use chemical flushes in your power steering This feature offers improved fuel economy by shutting system as the chemicals can damage your power off four of the engine’s eight cylinders during light load steering components.
Page 619
STARTING AND OPERATING 617 NOTE: • When the parking brake is applied and the transmis- sion is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle.
Page 620
618 STARTING AND OPERATING WARNING! WARNING! (Continued) • Be sure the parking brake is fully disengaged • Never use the PARK position as a substitute for the before driving; failure to do so can lead to brake parking brake. Always apply the parking brake failure and a collision.
STARTING AND OPERATING 619 BRAKE SYSTEM system. You may experience some clicking or hissing noises from the hydro-boost system during hard braking If power assist is lost for any reason (for example, conditions. repeated brake applications with the engine off), the brakes will still function.
620 STARTING AND OPERATING Your vehicle may also be equipped with Trailer Sway come on when the ignition switch is turned to the ON Control (TSC) and Hill Descent Control (HDC). position, have the light repaired as soon as possible. Electronic Brake Force Distribution (EBD) Anti-Lock Brake System (ABS) This function manages the distribution of the braking...
Page 623
STARTING AND OPERATING 621 You also may experience the following when ABS acti- WARNING! (Continued) vates: can cause possible loss of anti-lock braking capa- • The ABS motor noise (it may continue to run for a bility. Installation of such equipment should be short time after the stop).
622 STARTING AND OPERATING If the “Anti-Lock Brake Warning Light” is on, the brake WARNING! (Continued) system should be serviced as soon as possible to restore • The capabilities of an ABS equipped vehicle must the benefits of anti-lock brakes. If the “Anti-Lock Brake never be exploited in a reckless or dangerous Warning Light”...
STARTING AND OPERATING 623 unless braking is no longer desired. Once the brake pedal the brake while stopped on an incline, HSA will continue is released, the BAS is deactivated. to hold the brake pressure for a short period. If the driver does not apply the throttle before this time expires, the WARNING! system will release brake pressure and the vehicle will...
Page 626
624 STARTING AND OPERATING • HSA will work in REVERSE gear and all forward WARNING! (Continued) gears. The system will not activate if the transmission safe control of your vehicle. Failure to follow these is in PARK or NEUTRAL. For vehicles equipped with warnings can result in a collision or serious personal a manual transmission, if the clutch is pressed, HSA injury.
Page 627
STARTING AND OPERATING 625 • For vehicles equipped with the Electronic Vehicle WARNING! (Continued) Information Center (EVIC) or Driver Information Dis- incline while resuming acceleration, manually ac- play (DID), refer to “Electronic Vehicle Information tivate the trailer brake or apply more vehicle brake Center (EVIC)”...
626 STARTING AND OPERATING 5. Rotate the steering wheel slightly more than one-half Traction Control System (TCS) turn to the left. This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, the TCS may 6.
Page 629
STARTING AND OPERATING 627 counteracting the oversteer or understeer condition. En- Light” begins to flash during acceleration, ease up on the gine power may also be reduced to help the vehicle accelerator and apply as little throttle as possible. Be sure maintain the desired path.
Page 630
628 STARTING AND OPERATING ESC Operating Modes WARNING! (Continued) NOTE: Depending upon model and mode of operation, must never be exploited in a reckless or dangerous the ESC system may have multiple operating modes. manner which could jeopardize the user’s safety or the safety of others.
Page 631
STARTING AND OPERATING 629 • Trailer Sway control (TSC) is disabled when the ESC To enter the “Partial Off” mode, momentarily push the “ESC Off” switch and the “ESC Off Indicator Light” will system is in the “Partial Off” mode. illuminate.
Page 632
630 STARTING AND OPERATING ESC modes may also be affected by drive modes – if position. It should go out with the engine running. If the equipped. “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has WARNING! been detected in the ESC system.
STARTING AND OPERATING 631 NOTE: Electronic Roll Mitigation (ERM) • The “ESC Activation/Malfunction Indicator Light” This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the and the “ESC OFF Indicator Light” come on momen- speed of the vehicle.
632 STARTING AND OPERATING follow the trailer tongue weight recommendations. Refer WARNING! to “Trailer Towing” in this section for further informa- tion. Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance When TSC is functioning, the “ESC Activation/ that wheel lift or rollover may occur.
Page 635
STARTING AND OPERATING 633 • Parking brake is released. descending hills during various driving situations. HDC controls vehicle speed by actively controlling the brakes. • Driver door is closed. HDC has three states: Activating HDC 1. Off (feature is not enabled and will not activate). Once HDC is enabled, it will activate automatically if driven down a grade of sufficient magnitude.
Page 636
634 STARTING AND OPERATING • 1st = 0.6 mph (1 km/h) Driver Override • 2nd = 1.2 mph (2 km/h) The driver may override HDC activation with throttle or brake application at anytime. • 3rd = 1.8 mph (3 km/h) Deactivating HDC •...
Page 637
STARTING AND OPERATING 635 Disabling HDC Feedback To The Driver HDC will be deactivated and disabled if any of the The instrument cluster has an HDC icon and the HDC following conditions occur: switch has an LED which offer feedback to the driver about the state HDC is in.
636 STARTING AND OPERATING • The cluster icon and switch lamp will flash when HDC TIRE SAFETY INFORMATION deactivates due to overheated brakes. The flashing will Tire Markings stop and HDC will activate again once the brakes have cooled sufficiently. WARNING! HDC is only intended to assist the driver in control- ling vehicle speed when descending hills.
Page 639
STARTING AND OPERATING 637 • Temporary spare tires are designed for temporary NOTE: emergency use only. Temporary high pressure com- • P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
Page 640
638 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 641
STARTING AND OPERATING 639 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
640 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 643
STARTING AND OPERATING 641 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
642 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
STARTING AND OPERATING 643 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (B-Pillar) Example Tire Placard Location (Door)
Page 646
644 STARTING AND OPERATING Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4.
Page 647
STARTING AND OPERATING 645 NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occu- axles must not be exceeded. For further information on pants and cargo should never exceed XXX lbs or GAWRs, vehicle loading, and trailer towing, refer to XXX kg”...
Page 648
646 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
648 STARTING AND OPERATING • Tread Wear WARNING! • Ride Comfort Overloading of your tires is dangerous. Overloading Safety can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the WARNING! recommended load capacity for your vehicle. Never overload them.
STARTING AND OPERATING 649 Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures can cause steering prob- resulting in higher fuel consumption. lems. You could lose control of your vehicle. • Unequal tire pressures from one side of the vehicle Tread Wear to the other can cause the vehicle to drift to the Improper cold tire inflation pressures can cause abnor-...
Page 652
650 STARTING AND OPERATING At least once a month: been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours. • Check and adjust tire pressure with a good quality The cold tire inflation pressure must not exceed the pocket-type pressure gauge.
STARTING AND OPERATING 651 Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) WARNING! during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. High speed driving with your vehicle under maxi- mum load is dangerous.
652 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, • The tire has not been driven on when flat. Summer, Fall and Winter).
Page 655
STARTING AND OPERATING 653 Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires Summer tires only in sets of four; failure to do so may during the Winter.
654 STARTING AND OPERATING While studded tires improve performance on ice, skid See the tire pressure monitoring section for more infor- and traction capability on wet or dry surfaces may be mation. poorer than that of non-studded tires. Some states pro- Spare Tires —...
Page 657
STARTING AND OPERATING 655 equipment tire and wheel found on the front or rear axle Since this tire has limited tread life, the original equip- of your vehicle. This spare tire may be used in the tire ment tire should be repaired (or replaced) and reinstalled rotation for your vehicle.
Page 658
656 STARTING AND OPERATING Full Size Spare — If Equipped your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.
STARTING AND OPERATING 657 Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced.
658 STARTING AND OPERATING • Performance tires, tires with a speed rating of V or These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth higher, and Summer tires typically have a reduced becomes a 1/16 of an inch (1.6 mm).
Page 661
STARTING AND OPERATING 659 wear and correct cold tire inflation pressures. The manu- It is recommended you contact your authorized tire facturer strongly recommends that you use tires equiva- dealer or original equipment dealer with any questions lent to the originals in size, quality and performance you may have on tire specifications or capability.
660 STARTING AND OPERATING SUPPLEMENTAL TIRE PRESSURE INFORMATION WARNING! (Continued) — IF EQUIPPED • Never use a tire with a smaller load index or A light load vehicle condition is defined as two passen- capacity, other than what was originally equipped gers [150 lbs (68 kg) each] plus 200 lbs (90 kg) of cargo.
Page 663
STARTING AND OPERATING 661 Please follow the table below for proper tire size, chain type, and axle recommendations: Vehicle Axle Recommendations Tire Sizes Chain Class 1500 Models Rear Only P265/70R17 S Class 2500 Models Rear Only LT245/70R17E U Class LT265/70R18E...
Page 664
662 STARTING AND OPERATING WARNING! CAUTION! (Continued) • Install device as tightly as possible and then re- Using tires of different size and type (M+S, Snow) tighten after driving about ½ mile (0.8 km). between front and rear axles can cause unpredictable •...
STARTING AND OPERATING 663 TIRE ROTATION RECOMMENDATIONS The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern Tires on the front and rear axles of vehicles operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed.
664 STARTING AND OPERATING Directional Tires — If Equipped Dual Rear Wheels — If Equipped For the R/T package with 22” tires and wheels, the The tires used on dual wheel assemblies should be rotational direction of the tire must be taken into consid- matched for wear to prevent overloading one tire in a set.
Page 667
STARTING AND OPERATING 665 NOTE: If your vehicle is equipped with a Tire Pressure CAUTION! Information System (TPIS): • 3500 Dual Rear Tires may only have one approved • The Tire Pressure Information System (TPIS) uses direction of rotation. This is to accommodate the unique sensors in the inner rear wheels to help identify asymmetrical design (tread pattern) of the On/Off- them from the outer rear wheels, because of this, the...
666 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning The Tire Pressure Monitor System (TPMS) will warn the limit for any reason, including low temperature effects driver of a low tire pressure based on the vehicle recom- and natural pressure loss through the tire.
Page 669
STARTING AND OPERATING 667 For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) placard pressure • The TPMS has been optimized for the original of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), equipment tires and wheels.
668 STARTING AND OPERATING correct tire pressure using an accurate tire pressure CAUTION! (Continued) gauge, even if under-inflation has not reached the level moisture and dirt from entering the valve stem, to trigger illumination of the “Tire Pressure Monitor- which could damage the TPMS sensor. ing Telltale Light.”...
Page 671
STARTING AND OPERATING 669 The TPMS consists of the following components: Tire Pressure Monitoring Low Pressure Warnings • Receiver module The “Tire Pressure Monitoring Telltale Light” will • Four TPM sensors illuminate in the instrument cluster and a chime • Various TPMS messages, which display in the Elec- will sound when tire pressure is low in one or more of the four active road tires.
Page 672
670 STARTING AND OPERATING will automatically update, the graphic display in the EVIC/DID will return to it’s original color, and the “Tire Pressure Monitoring Telltale Light” will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information.
Page 673
STARTING AND OPERATING 671 SYSTEM message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: • Signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors.
Page 674
672 STARTING AND OPERATING Vehicles With Matching Full Size Spare Vehicles With Non Matching Full Size Spare Or Com- pact Spare • The matching full size spare wheel and tire assembly • The non matching full size spare or compact spare tire has a TPM sensor that can be monitored by the TPMS.
STARTING AND OPERATING 673 SYSTEM message for a minimum of five seconds and vehicle may need to be driven for up to 20 minutes then display dashes (- -) in place of the pressure value. above 15 mph (24 km/h) in order for the TPMS to receive this information.
Page 676
674 STARTING AND OPERATING The TPIS consists of the following components: If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault • Receiver module no longer exists, the SERVICE TPM SYSTEM message •...
STARTING AND OPERATING 675 General Information FUEL REQUIREMENTS This device complies with Part 15 of the FCC rules and 3.6L Engine RSS 210 of Industry Canada. Operation is subject to the following conditions: This engine is designed to meet all emis- 1.
676 STARTING AND OPERATING than 87 can cause engine failure and may void or not be a cause for concern. However, if the engine is heard covered by the New Vehicle Limited Warranty. making a heavy knocking sound, see your dealer imme- diately.
STARTING AND OPERATING 677 as specified by the (R+M)/2 method. The use of 89 octane Reformulated gasoline contains oxygenates and are spe- “Plus” gasoline is recommended for optimum perfor- cifically blended to reduce vehicle emissions and im- mance and fuel economy. prove air quality.
678 STARTING AND OPERATING If a Non-FFV vehicle is inadvertently fueled with E-85 CAUTION! (Continued) fuel, the engine will have some or all of these symptoms: cause emissions to exceed the applicable standard, • Operate in a lean mode. and/or cause the “Malfunction Indicator Light” to illuminate.
STARTING AND OPERATING 679 without MMT be used in your vehicle. The MMT content Indiscriminate use of fuel system cleaning agents should of gasoline may not be indicated on the gasoline pump, be avoided. Many of these materials intended for gum therefore, you should ask your gasoline retailer whether and varnish removal may contain active solvents or the gasoline contains MMT.
680 STARTING AND OPERATING Carbon Monoxide Warnings CAUTION! (Continued) some light smoke, your engine may be out of tune WARNING! or malfunctioning and may require immediate ser- Carbon monoxide (CO) in exhaust gases is deadly. vice. Contact your authorized dealer for service Follow the precautions below to prevent carbon assistance.
STARTING AND OPERATING 681 WARNING! (Continued) CAUTION! time the vehicle is raised. Have any abnormal Only vehicles with the E-85 fuel filler door label or a conditions repaired promptly. Until repaired, drive yellow gas cap can operate on E-85. with all side windows fully open. Ethanol Fuel (E-85) FLEXIBLE FUEL (3.6L ENGINE ONLY) —...
682 STARTING AND OPERATING Fuel Requirements NOTE: • Use seasonally adjusted E-85 fuel (ASTM D5798). With If your vehicle is E-85 compatible, it will operate on unleaded gasoline with any octane rating, or solely E-85 non-seasonally adjusted E-85 fuel, hard starting and fuel, or any mixture of these fuels.
STARTING AND OPERATING 683 FCA Material Standard MS-6395. It is recommended that Cruising Range engine oils that are API Certified and meet the require- Because E-85 fuel contains less energy per gallon/liter ments of Material Standard MS-6395 be used. MS-6395 than gasoline, an increase in fuel consumption will be contains additional requirements, developed during ex- experienced.
684 STARTING AND OPERATING Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect drivability. ADDING FUEL The fuel filler cap (gas cap) is located behind the fuel filler door, on the left side of the vehicle.
Page 687
STARTING AND OPERATING 685 CAUTION! WARNING! (Continued) • Never add fuel to the vehicle when the engine is • Damage to the fuel system or emissions control running. system could result from using an improper fuel • A fire may result if gasoline is pumped into a tank filler tube cap.
686 STARTING AND OPERATING Loose Fuel Filler Cap Message WARNING! Static electricity can cause an ignition of flammable If the vehicle diagnostic system determines liquid, vapor or gas in any vehicle or trailer. To that the fuel filler cap is loose, improperly reduce risk of serious injury or death when filling installed, or damaged, a loose gascap indicator containers:...
STARTING AND OPERATING 687 VEHICLE LOADING rear axle systems (GAWR). Total load must be limited so GVWR and front and rear GAWR are not exceeded. Certification Label Payload As required by National Highway Traffic Safety Admin- istration regulations, your vehicle has a certification label The payload of a vehicle is defined as the allowable load affixed to the driver’s side door or pillar.
Page 690
688 STARTING AND OPERATING Tire Size values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are The tire size on the Vehicle Certification Label represents added. the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
STARTING AND OPERATING 689 items down low and be sure that the weight is distributed TRAILER TOWING equally. Stow all loose items securely before driving. In this section you will find safety tips and information on limits to the type of towing you can reasonably do Improper weight distributions can have an adverse effect with your vehicle.
Page 692
690 STARTING AND OPERATING exceed the GVWR. Refer to “Vehicle Loading/Vehicle WARNING! (Continued) Certification Label” in “Starting And Operating” for you use a standard weight-carrying hitch, you could further information. lose control of your vehicle and cause a collision. Gross Trailer Weight (GTW) Gross Combination Weight Rating (GCWR) The GTW is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or tem-...
Page 693
STARTING AND OPERATING 691 the trailer tongue that typically provides adjustable fric- WARNING! tion associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition If equipped, the electronic Trailer Sway Control (TSC) can result if either rating is exceeded.
Page 694
692 STARTING AND OPERATING for heavier loads to distribute trailer tongue weight to the WARNING! tow vehicle’s front axle and the trailer axle(s). When used • An improperly adjusted weight distributing hitch in accordance with the manufacturer’s directions, it pro- vides for a more level ride, offering more consistent system may reduce handling, stability and braking steering and brake control, thereby enhancing towing...
Page 695
STARTING AND OPERATING 693 Without Weight-Distributing Hitch (Incorrect) With Weight-Distributing Hitch (Correct)
Page 696
694 STARTING AND OPERATING Recommended Distribution Hitch Adjustment Towing With 1500 Air Suspension 1. Set air suspension to normal ride height. No action is required if already in normal ride height. NOTE: The vehicle must remain in the engine running position while attaching a trailer for proper leveling of the air suspension system.
Page 697
[H1]). 8. The truck can now be driven. Jack mode will be canceled and vehicle will return to normal ride height when drive at speeds above 5mph (8kph). Example 1500 Height Measurement Example (mm) Measuring Height (H) 5. Attach the trailer to the vehicle without the weight distribution bars connected.
Page 698
(H2-H1)/2+H1 (about 1/2 the differ- (do not connect the trailer). ence between H2 and H1 above normal ride height NOTE: For Ram 2500/3500 trucks equipped with rear air [H1]). suspension, normal ride height or alternate ride height Example 2500/3500 can be used.
The coupling arm connects to the hitch mounted Class III Bumper 5,000 lbs (2,268 kg) / 500 lbs over the rear axle in the truck bed. Hitch - 1500 Model (226 kg) Class IV - 1500 11,000 lbs (4,989 kg) / 1100...
698 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Trailer Hitch Type and Maximum Trailer Weight Ratings) Gooseneck - 2500 20,000 lbs (9,071 kg) / Model 4000 lbs (1,814 kg) NOTE: For additional trailer towing information (maxi- mum trailer weight ratings) refer to the following website Gooseneck Or Fifth 32,000 lbs (14,545 kg) / 6000 addresses:...
STARTING AND OPERATING 699 • The weight of the driver and all passengers cause of many trailer collisions. Never exceed the maxi- mum tongue weight stamped on your trailer hitch. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle.
Page 702
700 STARTING AND OPERATING CAUTION! (Continued) WARNING! (Continued) • Then, during the first 500 miles (805 km) that a • When hauling cargo or towing a trailer, do not trailer is towed, do not drive over 50 mph (80 km/h) overload your vehicle or trailer.
Page 703
STARTING AND OPERATING 701 • Proper tire inflation pressures are essential to the safe WARNING! (Continued) and satisfactory operation of your vehicle. Refer to • GCWR must not be exceeded. “Tires – General Information” in “Starting And Oper- • Total weight must be distributed between the tow ating”...
Page 704
702 STARTING AND OPERATING Towing Requirements — Trailer Brakes CAUTION! WARNING! If the trailer weighs more than 1,000 lbs (453 kg) loaded, it should have its own brakes and they • Do not connect trailer brakes to your vehicle’s should be of adequate capacity. Failure to do this hydraulic brake lines.
Page 705
STARTING AND OPERATING 703 • Trailer brakes are recommended for trailers over 1,000 lbs (453 kg) and required for trailers in excess of 1,653 lbs (749 kg). Integrated Trailer Brake Module — If Equipped Your vehicle may have an Integrated Trailer Brake Mod- ule (ITBM) for Electric and Electric Over Hydraulic (EOH) trailer brakes.
Page 706
704 STARTING AND OPERATING The user interface consists of the following: sliding the manual brake control lever will display the GAIN setting for 10 seconds and the “Trailer Brake Status Manual Brake Control Lever Indicator Light” will not be displayed. Slide the manual brake control lever to the left to activate If a fault is detected in the trailer wiring or the Integrated power to the trailer’s electric brakes independent of the...
Page 707
STARTING AND OPERATING 705 Adjusting GAIN 4. Push the UP or DOWN button on the steering wheel until “TRAILER TOW” appears on the screen. NOTE: This should only be performed in a traffic free environment at speeds of approximately 20–25 mph 5.
Page 708
706 STARTING AND OPERATING Repeat steps 8 and 9 until the GAIN setting is at a point just below trailer wheel lockup. If towing a heavier trailer, trailer wheel lockup may not be attainable even with the maximum GAIN setting of 10. Light Electric Heavy Electric Light EOH...
Page 709
STARTING AND OPERATING 707 Display Messages WARNING! The trailer brake control interacts with the Electronic Connecting a trailer that is not compatible with the Vehicle Information Center (EVIC) or Driver Information ITBM system may result in reduced or complete loss Display (DID).
Page 710
708 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven- pin wiring harness.
STARTING AND OPERATING 709 Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy traffic. Automatic Transmission The DRIVE range can be selected when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing.
Page 712
710 STARTING AND OPERATING When towing a loaded trailer up steep grades at low Electronic Speed Control — If Equipped speeds (20 mph [32 km/h] or below), holding your • Do not use in hilly terrain or with heavy loads. vehicle in first gear (using the ERS shift control) can help •...
Using this vehicle for snowplow applications can cause damage to the vehicle. SNOWPLOW 1500 Models Only WARNING! NOTE: Do not use this model vehicle for snowplow Attaching a snowplow to this vehicle could adversely applications.
712 STARTING AND OPERATING WARNING! (Continued) WARNING! Do not expect that the airbag will perform as de- Attaching a snowplow to this vehicle could adversely scribed earlier in this manual. affect performance of the airbag system in a collision. Do not expect that the airbag will perform as de- 2500/3500 Models Only scribed earlier in this manual.
Page 715
STARTING AND OPERATING 713 • Check the runners and cutting edge for excessive wear. The loaded vehicle weight, including the snowplow The cutting edge should be ¼ to ½ in (6 cm to 1.2 cm) system, all aftermarket accessories, driver, passengers, above ground in snow plowing position.
Page 716
714 STARTING AND OPERATING Maintain and operate your vehicle and snowplow equip- Operating Tips ment following the recommendations provided by the Under ideal snow plowing conditions, 20 mph (32 km/h) specific snowplow manufacturer. should be maximum operating speed. The operator should be familiar with the area and surface to be Over The Road Operation With Snowplow cleaned.
Page 717
STARTING AND OPERATING 715 • Do not shift the transmission unless the engine has When plowing snow, to avoid transmission and drive- train damage, the following precautions should be ob- returned to idle and wheels have stopped. Make a served. practice of stepping on the brake pedal while shifting the transmission.
Page 718
716 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF Two-Wheel Four-Wheel Drive Models The Ground Drive Models Flat Tow NONE NOT AL- See Instructions • Automatic transmission in PARK LOWED •...
Page 719
STARTING AND OPERATING 717 NOTE: Recreational Towing — Two-Wheel Drive Models • When recreational towing your vehicle, always follow DO NOT flat tow this vehicle. Damage to the drivetrain will result. applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional de- Recreational towing (for two-wheel drive models) is tails.
Page 720
718 STARTING AND OPERATING 4. Properly secure the rear wheels to the dolly, following Recreational Towing — Four-Wheel Drive Models the dolly manufacturer’s instructions. NOTE: Both the manual shift and electronic shift transfer 5. Turn the ignition switch to the OFF position and cases must be shifted into NEUTRAL (N) for recreational remove the Key Fob.
Page 721
STARTING AND OPERATING 719 CAUTION! (Continued) CAUTION! (Continued) • Tow only in the forward direction. Towing this • Do not disconnect the rear driveshaft because fluid vehicle backwards can cause severe damage to the will leak from the transfer case, causing damage to transfer case.
Page 722
720 STARTING AND OPERATING 2. Shift the transmission to NEUTRAL. WARNING! (Continued) NOTE: If vehicle is equipped with air suspension, ensure the parking brake. The transfer case NEUTRAL (N) the vehicle is set to Normal Ride Height. position disengages both the front and rear drive shaft from the powertrain, and will allow the vehicle 3.
Page 723
STARTING AND OPERATING 721 shift to NEUTRAL (N) is complete. After the shift is 11. Shift the transmission into PARK or place manual completed and the NEUTRAL (N) light stays on, transmission in gear (NOT in Neutral). On 8-speed release the NEUTRAL (N) button. transmissions the shifter will automatically select PARK when the engine is turned off.
Page 724
722 STARTING AND OPERATING during the shift, the NEUTRAL (N) indicator light will Shifting Out Of NEUTRAL (N) flash continuously until all requirements are met or Use the following procedure to prepare your vehicle for until the NEUTRAL (N) button is released. normal usage: •...
Page 725
STARTING AND OPERATING 723 NEUTRAL (N) button has been released, the transfer 5. Turn the engine OFF. Shift automatic transmission into case will shift to the position indicated by the selec- PARK. On 8-speed transmissions the shifter will auto- tor switch. matically select PARK when the engine is turned off.
Page 726
724 STARTING AND OPERATING NOTE: With electronic shift transfer case: • Steps 3 and 4 are requirements that must be met before pushing the button to shift out of NEUTRAL (N), and must continue to be met until the shift has been completed.
Page 727
JACKING AND TIRE CHANGING ..731 GEAR SELECTOR OVERRIDE — 6-SPEED ▫ Jacking And Tire Changing 1500 Series Trucks .731 TRANSMISSION ..... . .778 ▫...
Page 728
726 WHAT TO DO IN EMERGENCIES ▫ Two-Wheel Drive Models ....784 MANUAL PARK RELEASE — 8 SPEED TRANSMISSION ..... . .780 ▫...
WHAT TO DO IN EMERGENCIES 727 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the upper switch bank just below the radio. potential for overheating by taking the appropriate ac- tion.
728 WHAT TO DO IN EMERGENCIES • You can also turn the temperature control to maximum WARNING! heat, the mode control to floor and the blower control to high. This allows the heater core to act as a You or others can be badly burned by hot engine supplement to the radiator and aids in removing heat coolant (antifreeze) or steam from your radiator.
WHAT TO DO IN EMERGENCIES 729 Torque Specifications Lug Nut/Bolt Lug Nut/ **Lug Lug Nut/ Torque Bolt Nut/Bolt Bolt Type Size Socket Size 130 Ft-Lbs Cone M14 x 22 mm (176 N·m) 1.50 140 Ft-Lbs Flanged (190 N·m) **Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before Two-Piece Lug Nut tightening.
Page 732
730 WHAT TO DO IN EMERGENCIES Wheel Mounting Surface 4 And 5 Lug Nuts/Bolts Torque Pattern Tighten the lug nuts/bolts in a star pattern until each WARNING! nut/bolt has been tightened twice. To avoid the risk of forcing the vehicle off the jack, After 25 miles (40 km) check the lug nut/bolt torque to be do not tighten the lug nuts fully until the vehicle has sure that all the lug nuts/bolts are properly seated...
WHAT TO DO IN EMERGENCIES 731 JACKING AND TIRE CHANGING WARNING! (Continued) Jacking And Tire Changing 1500 Series Trucks • The jack is designed to be used as a tool for changing tires only. The jack should not be used to WARNING! lift the vehicle for service purposes.
Page 734
The jack and jack tools are stored under the front passenger seat. Removal Of Jack And Tools (1500 Series) To access the jack and jack tools you must remove the plastic access cover, located on the side of the front passengers seat.
Page 735
Remove the jack and tools by turning the wing bolt Release the tool bag straps from the jack and remove counterclockwise, remove the wing bolt and then slide tools from bag. the assembly out from under the seat. Jack And Tool Bag Jack And Tools (1500 Series)
Page 736
734 WHAT TO DO IN EMERGENCIES There are 2 ways to assemble the tools: CAUTION! Assembled For Spare Tire Lowering/Raising • The wheel wrench can only be attached to exten- sion 3. • When attaching the tool to the winch mechanism be sure the large flared end opening on extension 1 is positioned correctly over the winch mechanism adjusting nut.
Page 737
WHAT TO DO IN EMERGENCIES 735 Assembled For Jack Operation WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
Page 738
736 WHAT TO DO IN EMERGENCIES Inserting The Jack Extension Tube Into The Access Hole Rotating The Wheel Wrench Handle 2. Rotate the wheel wrench handle counterclockwise 3. Pull the spare tire out from under the vehicle to gain until the spare tire is on the ground with enough cable access to the spare tire retainer.
Page 739
WHAT TO DO IN EMERGENCIES 737 Pulling The Spare Tire Out Gaining Access To The Retainer 4. Lift the spare tire with one hand to give clearance to 5. Pull the retainer through the center of the wheel. tilt the retainer at the end of the cable.
Page 740
738 WHAT TO DO IN EMERGENCIES Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 741
PARK; a manual transmission in REVERSE. • Never start or run the engine with the vehicle on a Jack Instructions (1500 Series) jack. • Do not let anyone sit in the vehicle when it is on a WARNING! jack.
Page 742
740 WHAT TO DO IN EMERGENCIES WARNING! (Continued) CAUTION! • If working on or near a roadway, be extremely Do not attempt to raise the vehicle by jacking on careful of motor traffic. locations other than those indicated in the Jacking •...
Page 743
WHAT TO DO IN EMERGENCIES 741 3. Placement of the jack: When changing a front wheel, place the scissor jack under the rear portion of the lower control arm as shown 4x2 Series Trucks Front Jacking Location below. There is a jack location indicator on the rear portion of the lower control arm.
Page 744
742 WHAT TO DO IN EMERGENCIES 4x4 Series Trucks Front Jacking Location There is a jack location indicator on the rear portion of the lower control arm. 4X4 Front Jacking Location 4x2 and 4x4 Rear Jacking Location Operate the jack using the jack drive tube and the wheel wrench.
Page 745
WHAT TO DO IN EMERGENCIES 743 drive tube to the extension tube. Place the jack under the CAUTION! axle between the wheel and the shock bracket with the drive tubes extending to the rear. Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required.
Page 746
744 WHAT TO DO IN EMERGENCIES risk of forcing the vehicle off the jack, do not fully 7. Install the wheel center cap and remove the wheel tighten the wheel nuts until the vehicle has been blocks. Do not install chrome or aluminum wheel lowered.
Page 747
WHAT TO DO IN EMERGENCIES 745 To Stow The Flat Or Spare NOTE: Vehicles equipped with aluminum wheels can- not be stored under the vehicle because the wheel retainer will not fit through the wheel pilot hole. Secure the flat tire in the bed of the truck. Have the flat tire repaired or replaced immediately.
Page 748
746 WHAT TO DO IN EMERGENCIES Pushing The Retainer Through The Center Of The Wheel Wrench And Jack Extension Tube Assembled And Wheel And Positioning It In Position 3. Attach the wheel wrench to the jack extension tube 4. Rotate the wheel wrench handle clockwise until the with the curved angle facing away from the vehicle.
Page 749
Reinstalling The Jack And Tools (1500 Series) 1. Tighten the jack all the way down by turning the jack turn-screw counterclockwise until the jack is snug.
Page 750
748 WHAT TO DO IN EMERGENCIES Jack And Tools Tied Jack And Tool Bag 4. Place the jack and tools in the storage position holding 3. Secure the tool bag straps to the jack. the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor.
Page 751
WHAT TO DO IN EMERGENCIES 749 Jack Hold Down Fastener Jack And Tools (1500 Series) NOTE: Ensure that the jack slides into the front hold WARNING! down location. After using the jack and tools, always reinstall them 5. Turn the wing bolt clockwise to secure to the floor pan.
750 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) could be crushed. Never put any part of your body you may experience abrupt stopping, rapid accelera- under a vehicle that is on a jack. If you need to get tion or sharp turns.
Page 753
WHAT TO DO IN EMERGENCIES 751 Removal Of Jack And Tools (2500, 3500 Series) To access the jack and jack tools you must remove the plastic access cover, located on the side of the front passengers seat. To remove the cover, pull the front part of the cover (closest to the front of the seat) toward you to release a locking tab.
Page 754
752 WHAT TO DO IN EMERGENCIES Remove the jack and tools by turning the wing bolt Remove the jack and tools from the bracket assembly. counterclockwise, remove the wing bolt and then slide Turn the jack-turn-screw counterclockwise to release jack the assembly out from under the seat.
Page 755
WHAT TO DO IN EMERGENCIES 753 There are 2 ways to assemble the tools: CAUTION! Assembled For Spare Tire Lowering/Raising • The wheel wrench can only be attached to exten- sion 3. • When attaching the tool to the winch mechanism be sure the large flared end opening on extension 1 is positioned correctly over the winch mechanism adjusting nut.
Page 756
754 WHAT TO DO IN EMERGENCIES Assembled For Jack Operation WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
Page 757
WHAT TO DO IN EMERGENCIES 755 Inserting The Jack Extension Tube Into The Access Hole Rotating The Wheel Wrench Handle 2. Rotate the wheel wrench handle counterclockwise 3. Pull the spare tire out from under the vehicle to gain until the spare tire is on the ground with enough cable access to the spare tire retainer.
Page 758
756 WHAT TO DO IN EMERGENCIES Pulling The Spare Tire Out Gaining Access To The Retainer 4. Lift the spare tire with one hand to give clearance to 5. Pull the retainer through the center of the wheel. tilt the retainer at the end of the cable.
Page 759
WHAT TO DO IN EMERGENCIES 757 Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 760
758 WHAT TO DO IN EMERGENCIES Block both the front and rear of the wheel diagonally WARNING! (Continued) opposite the jacking position. For example, if the right • Turn on the Hazard Warning flasher. front wheel is being changed, block the left rear wheel. •...
Page 761
WHAT TO DO IN EMERGENCIES 759 WARNING! (Continued) • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground.
Page 762
760 WHAT TO DO IN EMERGENCIES 1. Remove the spare wheel, jack, and tools from storage. 2. Using the lug wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise one turn while the wheel is still on the ground. Changing a dually tire requires the lug wrench adapter.
Page 763
WHAT TO DO IN EMERGENCIES 761 the tire as possible with the drive tubes extending to the front. Connect the jack tube extension and wheel wrench. Lug Wrench Adapter And Wrench 3. Placement of the jack: Front Jacking Location Front Jacking Location Rear Jacking Location When changing the front wheel, assemble the jack drive When changing a rear wheel, assemble the jack drive...
Page 764
762 WHAT TO DO IN EMERGENCIES extension tube. Place the jack under the axle between the CAUTION! spring and the shock absorber with the drive tubes extending to the rear. Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required.
Page 765
WHAT TO DO IN EMERGENCIES 763 5. Remove the wheel nuts and pull the wheel off. On single rear-wheel (SRW) trucks, install the spare wheel and wheel nuts with the cone shaped end of the wheel nuts toward the wheel. On 3500 dual rear-wheel models (DRW) trucks, if the outer tire is being re- placed then leave the inner wheel on the vehicle.
Page 766
764 WHAT TO DO IN EMERGENCIES them checked with a torque wrench by you authorized dealer or service station. WARNING! A loose tire or jack thrown forward in a collision or hard stop could injure someone in the vehicle. Al- ways stow the jack parts and the extra tire and wheel in the places provided.
Page 767
WHAT TO DO IN EMERGENCIES 765 9. Adjust the tire pressure when possible. NOTE: Do not oil wheel studs. For chrome wheels, do not substitute with chrome plated wheel nuts. To Stow The Flat Or Spare NOTE: Have the flat tire repaired or replaced immedi- ately.
Page 768
766 WHAT TO DO IN EMERGENCIES Pushing The Retainer Through The Center Of The Wheel Wrench And Jack Extension Tube Assembled And Wheel And Positioning It In Position 3. Attach the wheel wrench to the jack extension tube 4. Rotate the wheel wrench handle clockwise until the with the curved angle facing away from the vehicle.
Page 769
WHAT TO DO IN EMERGENCIES 767 mechanism slip, or click three or four times. It cannot NOTE: The winch mechanism is designed for use with be overtightened. Push against the tire several times to the jack extension tube only. Use of an air wrench or other ensure it is firmly in place.
Page 770
768 WHAT TO DO IN EMERGENCIES Jack And Tools Bracket Assembly Jack Hold Down Fastener 3. Place the jack and tool bracket assembly in the storage NOTE: Ensure that the jack and tool bracket assembly position holding the jack by the jack turn-screw, slip slides into the front hold down location.
Page 771
WHAT TO DO IN EMERGENCIES 769 4. Turn the wing bolt clockwise to secure to the floor pan. CAUTION! Reinstall the plastic cover. Use extreme caution when removing the front and rear center caps. Damage can occur to the center cap and/or the wheel if screwdriver type tools are used.
770 WHAT TO DO IN EMERGENCIES flat blade on the end of the lug wrench to pull the caps Replace the wheel skins first using a rubber mallet. When off. The wheel skin can now be removed. replacing the hub caps, tilt the cap retainer over the lug nut bolt circle and strike the high side down with a CAUTION! rubber mallet.
WHAT TO DO IN EMERGENCIES 771 JUMP-STARTING PROCEDURES CAUTION! If your vehicle has a discharged battery it can be jump- Do not use a portable battery booster pack or any started using a set of jumper cables and a battery in other booster source with a system voltage greater another vehicle or by using a portable battery booster than 12 Volts or damage to the battery, starter motor,...
Page 774
772 WHAT TO DO IN EMERGENCIES NOTE: The positive battery post is covered with a WARNING! protective cap. Lift up on the cap to gain access to the • Take care to avoid the radiator cooling fan when- positive battery post. Do not jump off fuses. Only jump directly off positive post.
WHAT TO DO IN EMERGENCIES 773 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 776
774 WHAT TO DO IN EMERGENCIES 4. Connect the opposite end of the negative (-) jumper CAUTION! cable to a good engine ground (exposed metal part of the discharged vehicle’s engine) away from the battery Do not connect jumper cable to any of the fuses on and the fuel injection system.
WHAT TO DO IN EMERGENCIES 775 4. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE cable from the positive (+) post of the vehicle with the If your vehicle becomes stuck in mud, sand, or snow, it discharged battery.
Page 778
776 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! • When “rocking” a stuck vehicle by shifting be- Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the en- tween DRIVE/2nd gear and REVERSE, do not spin gine to idle with the transmission in NEUTRAL for at the wheels faster than 15 mph (24 km/h), or drive- least one minute after every five rocking-motion...
Page 779
WHAT TO DO IN EMERGENCIES 777 WARNING! (Continued) WARNING! explode and injure someone. Do not spin your vehi- • Do not use a chain for freeing a stuck vehicle. cle’s wheels faster than 30 mph (48 km/h) or for Chains may break, causing serious injury or death. longer than 30 seconds continuously without stop- •...
778 WHAT TO DO IN EMERGENCIES GEAR SELECTOR OVERRIDE — 6-SPEED TRANSMISSION If a malfunction occurs and the gear selector cannot be moved out of the PARK position, you can use one of the following procedures to temporarily move the gear se- lector: Column Shifter —...
WHAT TO DO IN EMERGENCIES 779 Center Console Shifter — If Equipped 1. Turn the engine off. 2. Firmly apply the parking brake. 3. Using a small screwdriver or similar tool, remove the gear selector override access cover (located to the right of the gear selector).
Page 782
780 WHAT TO DO IN EMERGENCIES MANUAL PARK RELEASE — 8 SPEED TRANSMISSION WARNING! Always secure your vehicle by fully applying the parking brake, before activating the Manual Park Release. Activating the Manual Park Release will allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to a tow vehicle.
Page 783
WHAT TO DO IN EMERGENCIES 781 2. Using a small screwdriver or similar tool, remove the To Reset The Manual Park Release: Manual Park Release access cover, which is just above 1. Push the locking tab to the right, to unlock the lever. the parking brake release handle, below and to the left of the steering column.
Page 784
782 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE NOTE: Vehicles equipped with air suspension must be placed in Transport mode, before tying them down (from This section describes procedures for towing a disabled the body) on a trailer or flatbed truck. Refer to Air vehicle using a commercial towing service.
Page 785
WHAT TO DO IN EMERGENCIES 783 Towing Wheels 2WD Models 4WD Models Condition OFF the Ground Flat Tow NONE If transmission is operable: See instructions in “Recreational Tow- • Transmission in NEUTRAL ing” under “Starting and Operating” • 30 mph (48 km/h) max speed •...
Page 786
784 WHAT TO DO IN EMERGENCIES If you must use the accessories (wipers, defrosters, etc.) Two-Wheel Drive Models while being towed, the ignition must be in the ON/RUN The manufacturer recommends towing your vehicle with position, not the ACC position. all four wheels OFF the ground using a flatbed.
Page 787
WHAT TO DO IN EMERGENCIES 785 and the rear wheels on a towing dolly, or (when using a forward direction, with ALL wheels on the ground), IF suitable steering wheel stabilizer to hold the front wheels the transfer case is in NEUTRAL (N) and the transmis- in the straight position) with the rear wheels raised and sion is in PARK (for automatic transmissions) or in gear the front wheels on the ground.
Page 789
MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 3.6L ..790 DEALER SERVICE ..... .797 ENGINE COMPARTMENT —...
Page 790
788 MAINTAINING YOUR VEHICLE ▫ Body Lubrication .....811 VEHICLE STORAGE ....851 ▫...
Page 791
MAINTAINING YOUR VEHICLE 789 ▫ Side Marker Lamps (Dual Rear Wheels) — If ▫ Engine ......866 Equipped .
MAINTAINING YOUR VEHICLE 793 ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
794 MAINTAINING YOUR VEHICLE access this information to assist with the diagnosis and For further information, refer to “Privacy Practices — If service of your vehicle and emissions system. Equipped With Uconnect 8.4 Radio” and “Uconnect CyberSecurity” in “All About Uconnect Access” in your WARNING! Owner’s Manual Radio Supplement and “Cybersecurity”...
MAINTAINING YOUR VEHICLE 795 SELECT button to turn off the message. If the problem serviced, recently had a dead battery or a battery replace- continues, the message will appear the next time the ment. If the OBD II system should be determined not vehicle is started.
796 MAINTAINING YOUR VEHICLE 3. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. • The MIL will flash for about 10 seconds and then Regardless of whether your vehicle’s OBD II system is return to being fully illuminated until you turn OFF ready or not, if the MIL is illuminated during normal...
MAINTAINING YOUR VEHICLE 797 DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
798 MAINTAINING YOUR VEHICLE Engine Oil CAUTION! (Continued) Checking Oil Level • Your vehicle has been built with improved fluids that protect the performance and durability of your To assure proper lubrication of your vehicle’s engine, the vehicle and also allow extended maintenance inter- engine oil must be maintained at the correct level.
Page 801
API Certified and meet the requirements of FCA Material Standard MS-6395. 1500 Models Only NOTE: Under no circumstances should oil change inter- vals exceed 10,000 miles (16,000 km), twelve months or 350 hours of engine run time, whichever comes first. The 350 hours of engine run or idle time is generally only a concern for fleet customers.
Page 802
800 MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Engine Oil Viscosity — 3.6L Engines (1500 Models Identification Symbol Only) MOPAR SAE 5W-20 engine oil approved to FCA Material This symbol means that the oil has Standard MS-6395 or equivalent Pennzoil or Shell Helix been certified by the American is recommended for all operating temperatures.
Page 803
MAINTAINING YOUR VEHICLE 801 Engine Oil Viscosity — 5.7L Engine (1500/2500/3500 NOTE: For 2500/3500 trucks with a 5.7L engine operat- Models) ing under a gross combined weight rating of 14,000 lbs (6 350 kg) or greater, SAE 5W-30 meeting FCA Material...
802 MAINTAINING YOUR VEHICLE Synthetic Engine Oils Engine Oil Filter You may use synthetic engine oils provided the recom- The engine oil filter should be replaced with a new filter mended oil quality requirements are met, and the recom- at every engine oil change. mended maintenance intervals for oil and filter changes Engine Oil Filter Selection are followed.
Page 805
MAINTAINING YOUR VEHICLE 803 Engine Air Cleaner Filter Selection WARNING! The quality of replacement engine air cleaner filters The air induction system (air cleaner, hoses, etc.) can varies considerably. Only high quality filters should be provide a measure of protection in the case of engine used to assure most efficient service.
Page 806
804 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Removal 1. Release the spring clips from the air cleaner cover. 6.4L Air Cleaner Filter Cover 1 — Clean Air Hose Clamp 2 — Spring Clips 3.6L/5.7L Air Cleaner Filter Cover 1 — Clean Air Hose Clamp 2 —...
Page 807
MAINTAINING YOUR VEHICLE 805 2. Lift the air cleaner cover to access the air cleaner 3. Remove the air cleaner filter element from the housing filter. assembly. Open Air Cleaner Filter Assembly Air Cleaner Filter 1 — Air Cleaner Cover 1 —...
806 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Installation WARNING! (Continued) NOTE: Inspect and clean the housing if dirt or debris is • When working near the radiator cooling fan, dis- present before replacing the air filter element. connect the fan motor lead. The fan is temperature controlled and can start at any time regardless of 1.
Page 809
MAINTAINING YOUR VEHICLE 807 • Rib or belt wear normal. Any belt with cracks running along a rib must be replaced. Also have the belt replaced if it has excessive • Longitudinal belt cracking (cracks between two ribs) wear, frayed cords or severe glazing. •...
808 MAINTAINING YOUR VEHICLE Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. an output greater than 12 Volts. Do not allow cable You will never have to add water, nor is periodic main- clamps to touch each other. tenance required.
MAINTAINING YOUR VEHICLE 809 CAUTION! (Continued) WARNING! • If a “fast charger” is used while the battery is in the • Use only refrigerants and compressor lubricants vehicle, disconnect both vehicle battery cables be- approved by the manufacturer for your air condi- fore connecting the charger to the battery.
810 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling HFO 1234yf CAUTION! — If Equipped Do not use chemical flushes in your air conditioning HFO 1234yf Air Conditioning Refrigerant is a hydro- system as the chemicals can damage your air condi- fluoolefine HFO that is endorsed by the Environmental tioning components.
MAINTAINING YOUR VEHICLE 811 proper maintenance intervals. Use MOPAR Type be lubricated periodically with a lithium based grease, MS-6560 (lithium-based grease), or equivalent. such as MOPAR Spray White Lube to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit;...
812 MAINTAINING YOUR VEHICLE Windshield Wiper Blades The wiper blades and wiper arms should be inspected periodically, not just when wiper performance problems Clean the rubber edges of the wiper blades and the are experienced. This inspection should include the fol- windshield periodically with a sponge or soft cloth and a lowing points: mild nonabrasive cleaner.
Page 815
MAINTAINING YOUR VEHICLE 813 Wiper Blade Removal/Installation CAUTION! Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged. 1. Lift the wiper arm to raise the wiper blade off of the glass, until the wiper arm is in the full up position.
Page 816
814 MAINTAINING YOUR VEHICLE holding the wiper arm with one hand, slide the wiper 3. With the wiper blade disengaged, remove the wiper blade down towards the base of the wiper arm. blade from the wiper arm. Wiper Blade With Release Tab In Unlocked Position Wiper Blade Removed From Wiper Arm 1 —...
MAINTAINING YOUR VEHICLE 815 4. Gently lower the wiper arm onto the glass. reservoir with windshield washer solvent only (not ra- diator antifreeze). When refilling the washer fluid reser- Installing The Front Wipers voir, take some washer fluid and apply it to a cloth or 1.
816 MAINTAINING YOUR VEHICLE freezing the fluid on the cold windshield. Windshield exhaust system inspected each time the vehicle is raised washer solution used with water as directed on the for lubrication or oil change. Replace as required. container, aids cleaning action, reduces the freezing point to avoid line clogging, and is not harmful to paint or trim.
Page 819
MAINTAINING YOUR VEHICLE 817 Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
818 MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter damage: WARNING! (Continued) • Do not shut off the engine or interrupt the ignition, you see or hear steam coming from under the hood, when the transmission is in gear and the vehicle is in do not open the hood until the radiator has had time motion.
Page 821
MAINTAINING YOUR VEHICLE 819 Check the engine cooling system hoses for brittle rubber, reliable cooling system cleaner. Follow with a thorough cracking, tears, cuts and tightness of the connection at the rinsing to remove all deposits and chemicals. Properly coolant recovery bottle and radiator. Inspect the entire dispose of old engine coolant (antifreeze).
Page 822
820 MAINTAINING YOUR VEHICLE Adding Coolant CAUTION! (Continued) Your vehicle has been built with an improved engine Hybrid Organic Additive Technology (HOAT) en- coolant (OAT coolant conforming to MS.90032) that al- gine coolant (antifreeze) or any “globally compat- lows extended maintenance intervals. This engine cool- ible”...
Page 823
MAINTAINING YOUR VEHICLE 821 • Mix a minimum solution of 50% OAT engine coolant • Some vehicles require special tools to add coolant that meets the requirements of FCA Material Standard properly. Failure to fill these systems properly could MS.90032 and distilled water. Use higher concentra- lead to severe internal engine damage.
Page 824
822 MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any Disposal Of Used Engine Coolant accumulation of foreign material on the sealing surfaces. Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check WARNING! with your local authorities to determine the disposal rules for your community.
Page 825
MAINTAINING YOUR VEHICLE 823 To check the coolant level: 1. Open the coolant reservoir. Coolant Reservoir Dipstick 3. Check the coolant level on the dipstick. The radiator normally remains completely full, so there is Opening The Coolant Reservoir no need to remove the radiator cap unless checking for 2.
Page 826
824 MAINTAINING YOUR VEHICLE of this. As long as the engine operating temperature is bottle need only be checked once a month. When addi- satisfactory, the coolant bottle need only be checked once tional engine coolant (antifreeze) is needed to maintain a month.
MAINTAINING YOUR VEHICLE 825 • Check the coolant freeze point in the radiator and in • Do not change the thermostat for Summer or Winter the coolant expansion bottle. If engine coolant (anti- operation. If replacement is ever necessary, install freeze) needs to be added, the contents of the coolant ONLY the correct type thermostat.
Page 828
826 MAINTAINING YOUR VEHICLE With disc brakes the fluid level can be expected to fall as WARNING! (Continued) the brake linings wear. However, an unexpected drop in high brake temperatures, excessive lining wear, and fluid level may be caused by a leak and a system check should be conducted.
MAINTAINING YOUR VEHICLE 827 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contaminate moisture, use only new brake fluid or fluid that has the brake fluid. Brake seal components could be been in a tightly closed container.
Page 830
828 MAINTAINING YOUR VEHICLE For 1500 Model axles, the fluid level should be even with NOTE: The presence of water in the gear lubricant will the bottom of the fill hole (within 1/4 in (6.4 mm) of edge result in corrosion and possible failure of differential of hole) for the FDU215 HD front axle and C235FE rear components.
MAINTAINING YOUR VEHICLE 829 NOTE: When refilling an axle with a Limited Slip Differ- Automatic Transmission ential, (which requires a Limited Slip Additive), the Selection Of Lubricant Limited Slip Additive should be added before the gear It is important to use the proper transmission fluid to lubricant is added to insure proper additive fill.
Page 832
830 MAINTAINING YOUR VEHICLE CAUTION! (Continued) CAUTION! shudder, and will require more frequent fluid and Do not use chemical flushes in your transmission as filter changes. Refer to “Fluids, Lubricants, And the chemicals can damage your transmission compo- Genuine Parts” in this section for fluid specifica- nents.
Page 833
MAINTAINING YOUR VEHICLE 831 with an improper fluid level can cause severe transmis- Use the following procedure to check the transmission sion damage. fluid level properly: 1. Monitor the transmission temperature using the CAUTION! EVIC/DID screen, and operate the vehicle as required to reach the normal operating temperature.
Page 834
832 MAINTAINING YOUR VEHICLE 5. Place the gear selector momentarily into each gear minimum of two minutes for the oil to fully drain into position (allowing time for the transmission to fully the transmission before rechecking the fluid level. engage in each position), ending with the transmission NOTE: If it is necessary to check the transmission below in PARK.
MAINTAINING YOUR VEHICLE 833 8. Reinsert the dipstick. Check for leaks. Release the Fluid And Filter Changes — Six Speed parking brake. Transmission Refer to the “Maintenance Schedule” for the proper NOTE: To prevent dirt and water from entering the maintenance intervals.
Page 836
834 MAINTAINING YOUR VEHICLE hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under- • Wash your vehicle regularly. Always wash your ve- body protection. hicle in the shade using MOPAR Car Wash, or a mild car wash soap, and rinse the panels completely with The following maintenance recommendations will enable clear water.
Page 837
MAINTAINING YOUR VEHICLE 835 • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder that will •...
Page 838
836 MAINTAINING YOUR VEHICLE Wheel And Wheel Trim Care CAUTION! • All wheels and wheel trim, especially aluminum and Do not use scouring pads, steel wool, a bristle brush, chrome plated wheels, should be cleaned regularly or metal polishes. Do not use oven cleaner. These with a mild soap and water to prevent corrosion.
Page 839
MAINTAINING YOUR VEHICLE 837 • For tough stains, apply MOPAR Total Clean, or a mild Your leather upholstery can be best preserved by regular soap solution to a clean, damp cloth and remove stain. cleaning with a damp soft cloth. Small particles of dirt Use a fresh, damp towel to remove soap residue.
Page 840
838 MAINTAINING YOUR VEHICLE Cleaning Headlights CAUTION! Your vehicle is equipped with plastic headlights and fog Direct contact of air fresheners, insect repellents, lights that are lighter and less susceptible to stone break- suntan lotions, or hand sanitizers to the plastic, age than glass headlights.
Page 841
MAINTAINING YOUR VEHICLE 839 cleaner. Use caution when cleaning the inside rear win- Seat Belt Maintenance dow equipped with electric defrosters or windows Do not bleach, dye or clean the belts with chemical equipped with radio antennas. Do not use scrapers or solvents or abrasive cleaners.
Page 842
840 MAINTAINING YOUR VEHICLE rinse all loose dirt from your truck bed and clean your WARNING! (Continued) truck at least twice per year using the MOPAR Spray-On assemblies must be replaced after a collision if they Bedliner Conditioner available at your local authorized have been damaged (i.e., bent retractor, torn web- dealer.
MAINTAINING YOUR VEHICLE 841 to cover the metal exposed by the scratch is required. To WARNING! repair a tear or gouge, follow the directions provided in the MOPAR Quick Repair Kit. Do not use silicon-based protection products to clean your bedliner. Silicon-based products can become FUSES slippery and may result in personal injury.
842 MAINTAINING YOUR VEHICLE fuse is stamped on the inside cover that corresponds to WARNING! (Continued) the following chart. • If the replaced fuse blows again, contact an autho- rized dealer. • If a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact an authorized dealer.
Page 845
Equipped 40 Amp Green – Antilock Brakes/Electronic Stability Control Pump 40 Amp Green – Starter Solenoid 20 Amp Blue (1500 – Emissions Diesel – If Equipped LD/Cummins Die- sel) 40 Amp Green (Spe- – Diesel Fuel Heater – If Equipped cial Services Vehicle &...
Page 846
Blower Motor 40 Amp Green – Body Controller #4 / Interior Lighting 30 Amp Pink – Smart Bar – If Equipped 20 Amp Blue (1500 – SCR – If Equipped LD Diesel) 30 Amp Pink (Cum- mins Diesel) 30 Amp Pink –...
Page 847
Trailer Tow Backup Lights – If Equipped 20 Amp Blue – Trailer Tow Parking Lights – If Equipped 30 Amp Pink – Trailer Tow Receptacle 30 Amp Pink (1500 – Urea Heater Control – If Equipped LD Diesel) – – Spare Fuse 20 Amp Blue –...
Page 848
846 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink – Vehicle System Interface Module #2 – If Equipped 30 Amp Pink – Sunroof – If Equipped 30 Amp Pink – Rear Defroster – If Equipped 30 Amp Pink –...
Page 849
Spare Fuse – 10 Amp Red SCR Relay – If Equipped – 15 Amp Blue Underhood Lamp – 10 Amp Red (1500 PM Sensor – If Equipped LD Diesel & Cum- mins Diesel) – 10 Amp Red Air Conditioning Clutch –...
Page 850
25 Amp Clear Amplifier – 10 Amp Red PCM – If Equipped – 20 Amp Yellow Fuel Transfer Pump (HD Only) – If Equipped – 20 Amp Yellow (Gas Brake Vacuum Pump Gas/Diesel – If Engine & 1500 LD Equipped Diesel)
Page 851
MAINTAINING YOUR VEHICLE 849 Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Coolant Temperature Valve Actuator – 10 Amp Red Antilock Brakes / Electronic Stability Control – 10 Amp Red Drivetrain Control Module/Front Axle Dis- connect Module – 10 Amp Red Engine Control Module / Electric Power Steering...
Page 852
850 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Air Suspension – If Equipped / Trailer Tow / Steering Column Control Module – 15 Amp Blue Instrument Panel Cluster F90/F91 – 20 Amp Yellow Power Outlet (rear seats) Customer Select- able –...
MAINTAINING YOUR VEHICLE 851 Cavity Cartridge Fuse Micro Fuse Description F101 – 15 Amp Blue Electrochromatic Mirror / Smart High Beams – If Equipped F104 – 20 Amp Yellow Power Outlets (Instrument Panel / Center Console) CAUTION! CAUTION! (Continued) result in a dangerous electrical system overload. If •...
852 MAINTAINING YOUR VEHICLE • Any time you store your vehicle or keep it out of Interior Bulbs service (i.e., vacation) for two weeks or more, run the Bulb Number air conditioning system at idle for about five minutes Overhead Console TS 212–9 in the fresh air and high blower setting.
Page 855
MAINTAINING YOUR VEHICLE 853 Bulb Number Bulb Number Premium Bi Halogen 9005Sl+ LED Center High LED (Serviced at Autho- Projector Headlamp - Mounted Stop Lamp rized Dealer) Low Beam (CHMSL)/Cargo Lamp Premium Bi Halogen 9005LL Cab Roof Marker Lamps 194NA Projector Headlamp - Base Rear Tail/Turn and 3157K...
854 MAINTAINING YOUR VEHICLE BULB REPLACEMENT 5. Remove the upper radiator seal from the vehicle. NOTE: Lens fogging can occur under certain atmo- 6. Remove the two headlamp assembly attachment spheric conditions. This will usually clear as atmospheric screws. conditions change to allow the condensation to change back into a vapor.
Page 857
MAINTAINING YOUR VEHICLE 855 7. Reach into the front wheel house ahead of the front wheel, remove the fastener, and lift the cover over the access hole in the front of the wheel house splash shield. Access to the rear of the lamp can be gained through this access hole.
856 MAINTAINING YOUR VEHICLE 11. Replace bulb(s) as necessary. Fog Lamps — If Equipped 1. Reach under and behind the front bumper to access CAUTION! the back of the front fog lamp housing. • Do not contaminate the bulb glass by touching it 2.
MAINTAINING YOUR VEHICLE 857 Rear Tail/Stop, Turn Signal And Backup Lamps 2. Pull the outboard side of the lamp rearward far enough to unsnap the two receptacles on the outboard 1. Remove the two screws that pass through the bed side of the lamp housing from the two plastic snap sheet metal.
858 MAINTAINING YOUR VEHICLE 4. Rotate the bulb socket counterclockwise 1/4 turn to unlock it from the housing. 5. Pull the bulb straight out of the socket. CAUTION! Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces.
Page 861
MAINTAINING YOUR VEHICLE 859 4. Pull the desired bulb straight from the socket. CHMSL Connector Location 3. Turn the desired bulb socket ¼ turn and remove the CHMSL Bulb And Socket socket and bulb from housing.
860 MAINTAINING YOUR VEHICLE Cab Top Clearance Lamps — If Equipped CAUTION! 1. Remove the two screws from the top of the lamp. Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces.
Page 863
MAINTAINING YOUR VEHICLE 861 2. Rotate the bulb socket ¼ turn and pull it from the lamp 3. Pull the bulb straight from it’s socket and replace. assembly. Removing The Bulb From The Bulb Socket Removing Bulb Socket From Clearance Lamp...
862 MAINTAINING YOUR VEHICLE Rear Lamp Bar ID Marker (Dual Rear Wheels) — If 2. Turn the socket ¼ turn counterclockwise to access the Equipped bulb. 1. Loosen the two screws and the housing to gain access 3. Pull the bulb straight out from the socket. to the bulb sockets.
Page 865
MAINTAINING YOUR VEHICLE 863 Side Marker Lamps (Dual Rear Wheels) — If 1. Push rearward on the side marker lamp assembly. Equipped 2. Pull the entire assembly from the fender. 3. Turn the socket ¼ turn counterclockwise and remove from assembly to access the bulb. 4.
Page 867
13.7 Quarts 13 Liters 10 Year/150,000 Mile Formula that meets the requirements of FCA Material Standard MS.90032.) 5.7L Engine – 1500 Models (We recommend you use MOPAR 18.3 Quarts 17.3 Liters Antifreeze/Coolant 10 Year/150,000 Mile Formula that meets the requirements of FCA Material Standard MS.90032.) 5.7L Engine –...
Page 868
866 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). Engine Oil – 3.6L Engine We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix.
Page 869
MAINTAINING YOUR VEHICLE 867 Component Fluid, Lubricant, or Genuine Part Engine Oil – 5.7L Engine We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade.
Page 870
868 MAINTAINING YOUR VEHICLE Component Fluid, Lubricant, or Genuine Part Engine Oil Filter We recommend you use MOPAR brand Engine Oil Filters. Spark Plugs We recommend you use MOPAR Spark Plugs. Fuel Selection – 3.6L Engine 87 Octane, 0-15% Ethanol. Fuel Selection –...
Page 871
MAINTAINING YOUR VEHICLE 869 CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 872
ATF+4 fluid may affect the function or perfor- ment) mance of your transmission. We recommend MOPAR ATF+4 fluid. Transfer Case We recommend you use MOPAR BW44–44 Transfer Case Fluid. Front Axle – 1500 Four-Wheel Drive Models We recommend you use MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85.
Page 873
MAINTAINING YOUR VEHICLE 871 Component Fluid, Lubricant, or Genuine Part Rear Axle – 1500 Models We recommend you use MOPAR Synthetic Gear Lubri- cant SAE 75W-140 (MS-8985). Limited-Slip Rear Axles require the addition of 5 oz. (148 ml) MOPAR Limited Slip Additive (MS-10111).
Page 876
1500 Models Only Based on engine operation conditions, the oil change indicator message will illuminate. This means that ser- NOTE: Under no circumstances should oil change inter- vice is required for your vehicle.
Page 877
MAINTENANCE SCHEDULES 875 • Check the fluid levels of the coolant reservoir, brake Severe Duty All Models Only master cylinder, power steering (2500/3500 Models NOTE: Change Engine Oil at 4,000 miles (6,500 km) if the Only) and automatic transmission (six-speed only) vehicle is operated in a dusty and off road environment and fill as needed or is operated predominantly at idle or only very low...
Page 878
876 MAINTENANCE SCHEDULES Required Maintenance At Every Oil Change Interval As Indicated By Oil Change Indicator System: Refer to the Maintenance Schedules on the following • Inspect engine cooling system protection and pages for required maintenance. hoses. At Every Oil Change Interval As Indicated By Oil •...
Page 879
MAINTENANCE SCHEDULES 877 Maintenance Chart Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level.
Page 880
878 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect the brake linings, replace as necessary. Adjust parking brake as neces- sary. Inspect transfer case fluid. Additional Maintenance Replace engine air filter. Replace spark plugs.** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever...
Page 881
MAINTENANCE SCHEDULES 879 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change automatic transmission fluid and filter(s) (six-speed auto- matic only), if using your vehicle for police, taxi, fleet, or frequent trailer towing. Change automatic transmission fluid and filter(s) (six-speed auto- matic only).
Page 882
880 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change the transfer case fluid. Inspect and replace PCV valve if necessary. ** The spark plug change interval is mileage based only, yearly intervals do not apply.
Page 883
MAINTENANCE SCHEDULES 881 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 885
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .885 Impaired (TDD/TTY).
Page 886
884 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .892 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....891 ▫...
IF YOU NEED CONSUMER ASSISTANCE 885 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
886 IF YOU NEED CONSUMER ASSISTANCE Warranty service must be done by an authorized dealer. Any communication to the manufacturer’s customer cen- We strongly recommend that you take the vehicle to an ter should include the following information: authorized dealer. They know your vehicle the best, and •...
IF YOU NEED CONSUMER ASSISTANCE 887 FCA Canada Inc. Customer Center Tel.: (787) 782-5757 P.O. Box 1621 Fax: (787) 782-3345 Windsor, Ontario N9A 4H6 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) Phone: (800) 465-2001 English / (800) 387-9983 French To assist customers who have hearing difficulties, the In Mexico Contact manufacturer has installed special TDD (Telecommuni-...
888 IF YOU NEED CONSUMER ASSISTANCE Service Contract Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in You may have purchased a service contract for a vehicle those documents. to help protect you from the high cost of unexpected repairs after the manufacturer’s New Vehicle Limited We appreciate that you have made a major investment Warranty expires.
IF YOU NEED CONSUMER ASSISTANCE 889 REPORTING SAFETY DEFECTS WARNING! (Continued) In The 50 United States And Washington, D.C. contained in vehicles and certain products of compo- nent wear contain, or emit, chemicals known to the If you believe that your vehicle has a defect that could State of California to cause cancer and birth defects, cause a crash or cause injury or death, you should or other reproductive harm.
890 IF YOU NEED CONSUMER ASSISTANCE You can also obtain other information about motor NOTE: A street address is required when ordering vehicle safety from http://www.safercar.gov. manuals (no P.O. Boxes). In Canada Service Manuals If you believe that your vehicle has a safety defect, you These comprehensive Service Manuals provide the infor- should contact the Customer Service Department imme- mation that students and professional technicians need in...
IF YOU NEED CONSUMER ASSISTANCE 891 problems the first time, using step-by-step troubleshoot- ing and drivability procedures, proven diagnostic tests Visit us on the Worldwide Web at: and a complete list of all tools and equipment. • www.techauthority.com Owner’s Manuals DEPARTMENT OF TRANSPORTATION UNIFORM These Owner’s Manuals have been prepared with the TIRE QUALITY GRADES...
892 IF YOU NEED CONSUMER ASSISTANCE Treadwear Traction Grades The Treadwear grade is a comparative rating, based on The Traction grades, from highest to lowest, are AA, A, B, the wear rate of the tire when tested under controlled and C. These grades represent the tire’s ability to stop on conditions on a specified government test course.
IF YOU NEED CONSUMER ASSISTANCE 893 Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, The temperature grade for this tire is established for representing the tire’s resistance to the generation of heat a tire that is properly inflated and not overloaded. and its ability to dissipate heat, when tested under Excessive speed, under-inflation, or excessive load- controlled conditions on a specified indoor laboratory...
Page 915
INDEX 913 Load Capacity ..... .643, 644 Towing ......689, 782 Pressure Monitor System (TPMS) .
Page 916
914 INDEX Electronically Shifted ....526, 533, 538 Uconnect 8.4A/8.4AN Voice Recognition Fluid ....... .870 Additional Information .
Page 917
INDEX 915 Utility Rails, Rear Cargo Area ....269 Accessories ......598 Operation .
Page 918
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Need help?
Do you have a question about the 1500 and is the answer not in the manual?
Questions and answers