Table of Contents
Advertisement
NOTE:
Fold the panels gently. It is not recommended to
allow the panels to drop under their own weight.
6. Clip both stowage straps to prevent the
Tonneau Cover panels from unfolding.
Stowage Strap
7. Once on the Tri-Folded position, pull both front
clamp handles down to the Released Position.
Released Position
8. From the Released Position, send the clamps
to the Stowed Position by pushing from the
yellow bumper up. Listen for a "clicking" sound
to confirm the clamp has been properly
stowed.
Stowed Position
GETTING TO KNOW YOUR VEHICLE
9. With two people, remove the Tonneau Cover.
NOTE:
Be sure the Tonneau Cover has been folded
completely and that the stowage straps are
engaged before removing.
T
-F
T
C
RI
OLD
ONNEAU
OVER
I
NSTALLATION
To install the Tonneau Cover follow the following
steps:
1. Position the folded Tonneau Cover on the
truck bed and push the cover forward against
the front of the truck bed. The Tonneau Cover
centers itself when placed on the vehicle.
2. Pull down on the first set of clamp handles to
release the clamps from the stowed position.
Stowed Position
91
2
Advertisement
Table of Contents
