Table of Contents
Advertisement
344
SAFETY
2.
Place a child restraint on the seat and adjust the
tether strap so that it will reach over the seat back,
under the head restraint, through the tether strap
loop behind the seat and over to the tether strap loop
behind the center seat.
3.
Pass the tether strap hook under the head restraint
behind the child seat, through the tether strap loop
behind the seat and over to the center tether strap
loop.
Tether Strap Through Outboard Tether Strap Loop
4.
Attach the hook to the center tether strap loop (see
diagram). Tighten the tether strap according to the
child seat manufacturer's instructions.
Tether Strap Through Outboard Tether Strap Loop And
Attached To Center Tether Strap Loop
NOTE:
If there are child seats in both of the outboard (left and
right) seating positions, the tether strap hooks of both
child seats should be connected to the center tether strap
loop. This is the correct way to tether two outboard child
seats.
Center Seat:
1.
Raise the head restraint and reach between the rear
seat and rear glass to access the tether strap loop.
Tether Strap Loop With Head Restraint In Raised Position
2.
Place a child restraint on the seat and adjust the
tether strap so that it will reach over the seat back,
under the head restraint, through the tether strap
loop behind the seat and over to the tether strap loop
behind either the right or left outboard seat.
Advertisement
Table of Contents
