Table of Contents
Advertisement
O
L
R
IL
IFE
ESET
Use this QR code to access your digital
experience.
Your vehicle is equipped with an
engine oil change indicator system.
The "Oil Change Required" message
will display in the instrument cluster
display after a single chime has
sounded, to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent upon
your personal driving style.
NOTE:
Use the steering wheel instrument cluster display controls
for the following procedure.
Oil Life Reset Procedure
1.
Without pushing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2.
Push and release the down
arrow button to scroll
downward through the main menu to "Vehicle Info."
3.
Push and release the right
arrow button to access
the "Vehicle Info" screen, then scroll up or down to
select "Oil Life."
4.
Push and hold the right
arrow button to select
"Reset".
5.
Push and release the down
arrow button to select
"Yes," then push and release the right
button to reset the Oil Life to 100%.
6.
Push and release the up
arrow button to exit the
instrument cluster display screen.
Secondary Method Of Resetting Engine Oil Life
1.
Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2.
Fully press the accelerator pedal, slowly, three times
within ten seconds.
3.
Without pushing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset.
If necessary, repeat this procedure.
D
M
I
ISPLAY
ENU
TEMS
Push and release the up
or down
the desired selectable menu icon is highlighted in the
instrument cluster display.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Speedometer
Push and release the up
the speedometer menu item is highlighted in the
instrument cluster display. Push and release the right
arrow
arrow button to cycle the display between mph and km/h.
Driver Assist — If Equipped
The Driver Assist menu displays the status of the Adaptive
Cruise Control (ACC) and LaneSense systems.
Push and release the up
the Driver Assist menu is displayed in the instrument
cluster display.
Adaptive Cruise Control (ACC) Feature
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the ACC on/off button (located on the steering
wheel) until one of the following displays in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
arrow button until
When ACC is activated but the vehicle speed setting has
not been selected, the display will read "Adaptive Cruise
Control Ready."
Push the SET + or the SET- button (located on the steering
wheel) and the following will display in the instrument
cluster display:
107
or down
arrow button until
3
or down
arrow button until
Advertisement
Table of Contents
