Table of Contents
Advertisement
266
MULTIMEDIA
5.
If "No" is selected, and you still would like to pair a
mobile phone, press the Phone Pairing or Settings
button from the Uconnect Phone main screen.
Press the Paired Phones button or the Add Device
button.
Search for available devices on your Blue-
tooth®-enabled mobile phone. When prompted
on the phone, select "Uconnect" and accept the
connection request.
6.
Uconnect Phone will display an in-progress screen
while the system is connecting.
7.
When your mobile phone finds the Uconnect system,
select "Uconnect."
8.
When prompted on the mobile phone, accept the
connection request from Uconnect.
9.
When the pairing process has successfully
completed, the system will prompt you to choose
whether or not this is your favorite phone. Selecting
"Yes" will make this phone the highest priority. This
phone will take precedence over other paired phones
within range and will connect to the Uconnect system
automatically when entering the vehicle. Only one
mobile phone and/or one Bluetooth® audio device
can be connected to the Uconnect system at a time.
If "No" is selected, simply select "Uconnect" from the
mobile phone/audio device Bluetooth® screen, and
the Uconnect system will reconnect to the
Bluetooth® device.
NOTE:
For phones which are not made a favorite, the phone
priority is determined by the order in which it was paired.
The most recent phone paired will have the higher priority.
NOTE:
During the pairing procedure, you may receive a pop-up on
your mobile phone for the Uconnect system to access your
"messages" and "contacts". Selecting "Ok" or "Allow" will
sync your contacts with the Uconnect system.
You can also use the VR command "Show Paired Phones"
to bring up the Paired Phone screen from any screen on
the radio.
NOTE:
Software updates on your phone or the Uconnect system
may interfere with the Bluetooth® connection. If this
happens, simply repeat the pairing process. However, first
make sure to delete the device from the list of phones on
your Uconnect system. Next, be sure to remove Uconnect
from the list of devices in your phone's Bluetooth®
settings.
CONNECTING TO A PARTICULAR MOBILE
PHONE OR AUDIO DEVICE AFTER PAIRING
Uconnect Phone will automatically connect to the highest
priority paired phone and/or Audio Device within range. If
you need to choose a particular phone or audio device
follow these steps:
1.
Press the Settings button on the touchscreen.
2.
Press the Paired Phones or Audio Sources button.
3.
Press to select the particular phone or the particular
audio device. A pop-up menu will appear; press
"Connect Phone".
4.
Press the X to exit out of the Settings screen.
DISCONNECTING OR DELETING A PHONE OR
AUDIO DEVICE
Uconnect 3 With 5-inch Display
1.
Press the Uconnect Phone Pairing or Settings
button.
2.
Press the Paired Phones or Audio Sources button.
3.
Press the Settings button located to the right of the
device name for a different phone or audio device
than the currently connected device or press the
preferred Connected Phone from the list.
Advertisement
Table of Contents
