Table of Contents
Advertisement
Correct Folding — Hold Panels Together
NOTE:
Fold the panels gently. It is not recommended to
allow the panels to drop under their own weight.
6. Clip both stowage straps to prevent the Tonneau
Cover panels from unfolding.
Stowage Strap
7. Once in the Tri-Folded position, pull both front clamp
handles down to the Released Position.
Released Position
8. From the Released Position, send the clamps to the
Stowed Position by pushing from the yellow bumper
up. Listen for a "clicking" sound to confirm the
clamp has been properly stowed.
Stowed Position
9. With two people, remove the Tonneau Cover.
NOTE:
Be sure the Tonneau Cover has been folded completely
before removing.
GETTING TO KNOW YOUR VEHICLE
TRI-FOLD TONNEAU COVER
INSTALLATION
To install the Tonneau Cover follow the following steps:
1. Position the folded Tonneau Cover on the truck bed
and push the cover forward against the front of the
truck bed. The Tonneau Cover centers itself when
placed on the vehicle.
NOTE:
Make sure to always push the Tonneau Cover all the
way forward on the truck bed. Failure to do so might
prevent proper clamp engagement, or interfere with
the tailgate auto drop function (if equipped).
2. Pull down on the first set of clamp handles to
release the clamps from the stowed position.
Stowed Position
3. Push clamp wires up and under the flange of the
box (or flange of the RamBox rail, if equipped) to the
semi clamped position.
81
2
Advertisement
Table of Contents
