Bosch rexroth ActiveShuttle System Manual page 96

96
Icon Def.
RA91390962 AB-V1.3.3, en
Images
ILS, ActiveShuttle | User interface
Course of action
Edit Waypoints
→ Left-click on a Waypoint placed on the
map.
A rotating crosshair appears around the
Waypoint to signal that edit mode is active.
→ Left-click and drag the Waypoint to
drop it on a new location on the map.
→ Right-click Waypoint to open editing
menu.
→Click on Convert to.
→ Chose one of the listed types of
Waypoints to convert the selected
Waypoint into.
→ Click on Move to.
→ Chose one of the listed locations on the
map to immediately move the Waypoint
there.
→ Click on Delete neighbor.
→ Chose one of the listed neighbors to
delete it.
The neighbor Waypoint and the Path
leading to it are deleted.
→ Click on Delete all connections to
delete all Paths from the Waypoint.
Paths leading to the Waypoint remain.
→ Click on Delete to delete the Waypoint
from the map.