Bosch rexroth ActiveShuttle System Manual page 126

126
Detail view
4
5
RA91390962 AB-V1.3.3, en
ILS, ActiveShuttle | Logistic commissioning
Description
Add Waypoints
→ Click on the Waypoint icon in the Waypoint
Toolbar.
→ Drag the Waypoint icon onto a specific
location on the map.
The dragged Waypoint is greyed out.
→ Click again to drop the Waypoint.
The next Waypoint is automatically selected.
→ Drag the next Waypoint icon onto the map.
→ Left-click and drag Waypoints to continue
placing them on the map.
→ Right-click Waypoint to stop placing.
Connect Waypoints and Points of Interests via
Paths
→ Select the Unilateral or Bilateral Path Tool
on the Waypoint Toolbar.
→ Click on a Waypoint.
The selected Waypoint is marked green.
→ Click on a second Waypoint to which the Path
is supposed to lead.
A Unilateral Path is created and the
Waypoints are connected.
Notice!
It is not necessary to create a Path from an
existing Waypoint.
→ Alternatively select the Unilateral Path Tool
and click on a free spot on the map.
A new Waypoint is created.
→ Click on an existing Waypoint or Point of
Interest to connect it, or click on a free spot to
create a new Waypoint.