Cruise Control - Aston Martin DB 9 2010 Manual

Present Speed - Shows the current vehicle
speed.
Driver aid only.
Trip computer default screen.
Blank Screen - Blank screen will show.
Display Units
With the ignition ON press the READ
button (C) and the Trip Computer
button (D) together for three seconds to
change the trip computer display units.

Cruise Control

Cruise Control can be used to
maintain a selected vehicle speed,
above 22 mph (35 km/h), without
having to use the accelerator.
[1] RES- Resume the set speed
retained in memory.
[2] SET- Set the speed, accelerate or
decelerate.
[3] ON/OFF- Sets Cruise Control to
ON or OFF.
[4] CAN- Cancels Cruise Control but keeps the set speed in memory.
Operation
Warning: Only use Cruise Control when conditions are
favorable, for example, straight, dry, open roads with light
traffic.
Use the ON/OFF switch (3) to set Cruise Control ON and OFF. When
Cruise Control is ON 'CRUISE' will show in the message centre (left)
(Refer to 'Instrument Cluster', page 4.3).
When travelling at the desired speed, which must be above 22 mph
(35 km/h), press SET (+ or -) (2). Cruise Control will engage and
maintain that speed without the need to use the accelerator pedal.
Under certain conditions Cruise Control will automatically set to
OFF (Refer to 'Cruise Control Automatic OFF', page 4.18).
Cruise Control will automatically disengage when the brake
pedal is pressed or when the vehicle speed falls below 22 mph
(35 km/h).
4.17