Aston Martin DB 9 2010 Manual page 184

Select using the JOYSTICK (right or left) and confirm by pressing
ENTER.
<Map> - Select if the map is to show. If the map is hidden, the
system guides with an arrow.
<Map view> - If in one map view on the SCREEN, select to view
either a 2D or 3D map. If in two map view on the SCREEN select
views for left and right maps (Refer to 'Map View', page 10.28).
<2D Map orientation> - Select whether north or the heading
(direction of travel) should be up when looking at the map.
<Compass> - Select if the compass is to be shown on the SCREEN.
<2D Map orientation> is only available when 2D view is
selected in <Map view>.
10.14
<Current Location> - Select if the name of the street on which the
vehicle is currently driving should be shown at the bottom of the
SCREEN.
<Reset to default> - Restore factory settings. Press the JOYSTICK
right. Select <OK> or <Cancel> and press ENTER.
Guiding Options
<Settings> (Enter) <Guiding options> (Enter)
Use the JOYSTICK to move between the functions and select the
desired setting. Confirm settings by pressing ENTER.
<Time/dist. to go> - Select <RTA> (Remaining time to arrival) or
<ETA> (Estimated time of arrival). Distance to go will also show.
Select <Hide> if this information is not to be shown.
<POI warning> - Select if an audible and visual warning is to sound
and show when approaching an accident blackspot or a safety
camera.
<Reset to default> - Restore factory settings. Press the JOYSTICK
right. Select <OK> or <Cancel> and press ENTER.
Which areas have accident blackspots and or safety cameras
marked on the map is regulated by legislation in the respective States.
System Settings
<Settings> (Enter) <System settings>
Use the JOYSTICK to move between the functions and select the
desired setting. Confirm settings made using ENTER.
<Guiding voice> - A male or a female guiding voice can be
selected.
<Guiding volume> - Guiding voice volume.