Cruise Control - Aston Martin Vantage S 2016 Owner's Manual

Cruise Control

Cruise control can be used to maintain a selected vehicle speed,
above 30 km/h, without having to use the accelerator.
[1] RES: Resume the set speed retained in memory.
[2] SET: Sets the speed. Press either + or - to increase or decrease the
set speed.
[3] ON/OFF: Sets cruise control to ON or OFF.
[4] CAN: Cancels cruise control but keeps the set speed in memory.
4.20
Operation
Warning: Only use cruise control when conditions are
favourable, for example, straight, dry, open roads with light
traffic.
Use the ON/OFF switch to set cruise control ON and OFF. When
cruise control is ON, 'CRUISE' will show in the message centre.
When travelling at the desired speed, which must be above 30 km/h,
press the SET (+ or –) button. Cruise control will engage and maintain
that speed without the need to use the accelerator pedal.
Under certain conditions cruise control will automatically set to
OFF (Refer to 'Cruise Control Automatic OFF', page 4.21).
Cruise control will automatically disengage when the brake pedal
is pressed or when the vehicle speed falls below 30 km/h.
Changing the Set Speed
There are three ways to change the set speed:
• Accelerate or decelerate to the desired speed then press the SET
(+ or –) button.
• Accelerate or decelerate to the desired speed by pressing and
holding the SET (+ or –) button until the desired speed is
obtained, then release.
• Accelerate or decelerate to the desired speed in steps of 2 km/h
by briefly pressing and releasing the SET (+ or –) button until the
desired speed is obtained.