Initial Pairing - Aston Martin DB 9 2010 Manual

Disconnecting
The mobile phone will automatically disconnect when moved out of
the Hand-Free system's range or Bluetooth is made unavailable on
the mobile phone.
The mobile phone will manually disconnect when the Hands-Free
system is set to OFF. Press and hold PHONE until
from the DISPLAY. The function is also stopped when the ignition is
set to OFF.
If the mobile phone has been disconnected during an ongoing call,
the call will transfer to the mobile phone.
Some mobile phones require that the transfer is confirmed from
the phone's keypad.
9.6

Initial Pairing

Use this procedure when pairing the first mobile phone to the Hands-
Free system. If the Hands-Free system is not ON or in use, press
PHONE.
The DISPLAY will show 'No Paired Phones. Press ENTER to Add a
Phone. Press EXIT to cancel.' Press ENTER.
The Hands-Free system will asked if Bluetooth is in discoverable
is removed
mode (refer to the mobile phone manufactures instructions). If yes
press ENTER. After a short while a list of phones which are in range
and in dicscoverable mode will be shown.
If the symbol is shown in the DISPLAY when the ignition
is ON, initial pairing can be completed using the mobile phone (Refer
to 'Pairing Using the Mobile Phone', page 9.8).
Press the JOYSTICK (up or down), SCROLL button or turn the
TUNING dial to navigate to the required mobile phone and press
ENTER. The DISPLAY will then ask for a passkey to be entered into
the mobile phone. The mobile phone will prompt for the passkey.
Enter the passkey into the mobile phone.
The DISPLAY will show 'Phone Connecting...' then, if successful,
'Synchronizing'.
Once synchronizing has completed the mobile phone is ready for
use.
If the passkey is not entered after 20 seconds the screen will time-
out.
Synchronizing automatically places all the mobile phone
contacts onto the vehicle system (Refer to 'Phone Book', page 9.10).