Internal Bulbs - Aston Martin DB 9 2010 Manual

Internal Bulbs

Trunk Lamp
Bulb Specification
Rating - 3W
Type - W3W
1. Taking care not to damage the vehicle trim, lever out the lens
unit (A).
2. Twist, counterclockwise, and remove the bulb holder. Replace
the defective bulb.
3. Install the bulb
holder and clip the
lens unit into its
housing.
Bulb specification -
(Refer to 'Bulbs', page
12.6)
11.40
Interior Lamps
A
Bulb Specifications
[1] - Map (LED - not serviceable)
[2] - Rear Environment
Rating - 5W
Type - W5W (Blue)
[3] - Footwell
Rating - 5W
Type - W5W (Blue)
[4] - Door
Rating - 5W
Type - C5W (Festoon)
1. Taking care not to damage the vehicle trim, lever out the lens
unit.
2. Replace the defective bulb.
Door lamp only: Open the access flap and replace the
defective bulb.
3. Press the lens unit into its housing until it clips into position.