Using Advanced Mode - Aston Martin DB 9 2010 Manual

<Language> - Select the language to be used.
<Menu color> - Select <Black>, <Chrome> or <Blue>.
<Map color> - Select <Bright 1>, <Bright 2> or <Dark>.
<Screen saver> - Select whether the screen saver is to be used
(comes ON after 30 seconds).
<Help> - Select if help texts are to show at the bottom of the
SCREEN.
<Distance unit> - Select <US miles> or <km>.
<User mode> - Select <Easy> or <Advanced>. All destinations
will be deleted if changing operating modes.
<Date & time info> - Press the JOYSTICK right. Set the date and
time format.
<GPS Information> - Press the JOYSTICK right to view coordinates
and address of the vehicle's position, as well as the number of
satellites the system is in contact with.
<About> - System information.
<Reset to default> - Restore factory settings. Press the JOYSTICK
right. Select <OK> or <Cancel> and press ENTER.

Using Advanced Mode

The Navigation system requires a destination to be entered so that a
route to the destination can then be calculated. Various destination
options are available.
Once a valid destination has been entered <Start Guide> will be
available.
Various destinations can be entered and saved as an itinerary (Refer
to 'Itinerary', page 10.22).
If the SCREEN is in map view press BACK to access the main
menu.
10.15