Pairing Additional Phones - Aston Martin DB 9 2010 Manual

Pairing Additional Phones

Pairing Using the Hands-Free System
Disconnect any in use phones before pairing additional phones.
If a phone is connected to the Hands-Free system pairing a new
phone will not be possible until the Hands-Free system has no in use
Bluetooth connections.
If, after 30 seconds, the Hands-Free Phone has not been used,
the Infotainment system will default to Audio functions. Return to
Hands-Free Phone functions by pressing PHONE or CALL.
Check that the mobile phone has Bluetooth ON and visible. Check
that the Hands-Free system is ON ( symbol will show in the
DISPLAY).
The Hands-Free system automatically searches for the last used
phone. If the last used phone is not found a list of paired phones will
show along with <Add phone>. Select <Add phone> to pair a new
phone to the system.
If the last used phone is found press MENU and navigate to <Phone
Menu...> (Enter) <Bluetooth...> (Enter) <Change phone...> (Enter)
<Add Phone...>.
Press ENTER. The Hands-Free system will asked if Bluetooth is in
discoverable mode (refer to the mobile phone manufactures
instructions). If yes press ENTER. After a short while a list of phones
which are in range and in dicscoverable mode will show.
Press the JOYSTICK (up or down), SCROLL button or turn the
TUNING dial to navigate to the required mobile phone and press
ENTER.
The DISPLAY will then ask for a passkey to be entered into the mobile
phone. The mobile phone will prompt for the passkey. Enter the
passkey into the mobile phone.
The DISPLAY will show 'Phone Connecting...' then, if successful,
'Synchronizing'. Once synchronizing has completed the mobile
phone is ready for use.
If the passkey is not entered after 20 seconds the screen will time-
out.
Synchronizing automatically places all the mobile phone
contacts onto the Hands-Free system (Refer to 'Phone Book', page
9.10).
9.7