Aston Martin DB 9 2010 Manual page 33

They can also be adjusted:
• Up to six minutes after a door is unlocked and before the vehicle
key is inserted into the Ignition Control
• Up to six minutes after the vehicle key is removed from the
Ignition Control
If the seat operation times out:
• Place the vehicle key in the
Ignition Control
• Close or open a door
The seat adjustment controls
are located each side of the
centre console (A).
Seat Head Restraints
The Driver and front Passenger seats
include non-adjustable head restraints
(A), which limit the rearward travel of
the head in a rear impact and may
reduce whip lash injuries.
When sitting in the seats make sure
that the seat back is in an upright
position and that the rear of the head
is positioned in the centre of the head
restraint area. The head restraints are
most effective when the distance
between the rear of the head and the
head restraint is kept to a minimum.
Seat Position
When making seat adjustments, i.e. moving the seat base
rearwards, raising or lowering the seat base, the seat back will motor
forwards whenever it approaches trim panels located behind it. If the
seat back is tilted backwards the seat base will move forwards if the
seat back approaches trim panels.
[1] - Raise or lower the front of the seat.
[2] - Move the seat forwards or rearwards.
[3] - Raise or lower the rear of the seat.
[4] - Increase or
decrease the angle of
the seat back.
2
1
4
3
3.3