Stalk Controls - Aston Martin DB 9 2010 Manual

Preventing Unnecessary Battery Drain
If the vehicle key is left in the Ignition Control (position '0'), some
vehicle circuits will stay ON and unnecessary current will be drawn
from the battery.
A temporary label
is installed on all
new vehicles to
remind drivers to
remove the vehicle
key whenever the
ignition is set to
OFF (Refer to 'Vehicle Battery Charge', page 11.28)
4.12

Stalk Controls

Left Side Stalk
Turn Signals - Press up for a a right turn,
press down for a left turn. Returns to the
centre position on completion of a
manoeuvre. Hold against spring pressure to
show a lane change.
Main and Dipped Beam - Pull forwards and
latch for main beam. Pull forwards again and
latch to return to dipped beam. Pull forwards
and release without latching, at any time
while the vehicle key is in the Ignition
Control, to flash main beam ON and OFF.
Pull forwards and release without latching, when the vehicle key is
removed, to start Homesafe (Refer to 'Homesafe', page 2.11).
Trip Computer - Repeated pressing of the
trip function button (A) moves through the
trip computer displays. (Refer to 'Trip
Computer', page 4.16).
Right Side Stalk
Windshield Wiper Control -
[1] - OFF.
[2] - Intermittent Wipe.
[3] - Normal Speed Wipe.
[4] - Fast Wipe.