Aston Martin DB 9 2010 Manual page 189

<Around the car> - The system searches in a circle with a
maximum radius of 155 mile (250 km). The search is stopped when
40 Points of Interest are found.
Press ENTER and select <Last 5> or <All types>. Select a Facility
from the list and press ENTER. Select from the list of Facility names
and press ENTER. Select <Add to itinerary> or <POI information>.
It is also possible to search for POI around the vehicle, along the
itinerary and along the Highway using the Quick menu (Refer to
'Destination from a Point on the Map', page 10.20).
<Along the route> - Use the procedure described for <Around the
car>. When a destination has been specified, the system can search
for POI within an area maximum 0.5 mile (1 km) from the route.
<Around point on map> - The system searches the same way as
<Around the car>, but around a specified point on the map. Enter
Map scroll (press the JOYSTICK left, right, up or down) and scroll to a
destination on the map. Press ENTER and select <POI around>.
<Along a street> - The system searches along a specified street.
Select an option using the JOYSTICK and press ENTER.
Destination by a Stored Location
<Set destination> (Enter) <Stored destinations> (Enter)
A stored location is a destination stored previously, i.e. your home
address, an airport, etc. If no destinations are stored this option will
not be available.
A list of stored destinations is shown. Use the JOYSTICK to move to a
stored destination. Press ENTER to access the submenu.
<Add to itinerary> - Add the stored destination in the itinerary.
<Information> - Provides information on the stored destination.
<Edit> - Change the name, etc. of the stored destination.
<Sorting> - Sort stored destinations by icon or name.
<Delete Destination> - Delete a stored destination.
<Del. all> - Delete all stored destinations.
Select an option and press ENTER.
10.19