Removing A Paired Phone - Aston Martin DB 9 2010 Manual

Pairing Using the Mobile Phone
Disconnect any in use phones before pairing additional phones.
If a phone is connected to the Hands-Free system pairing a new
phone will not be possible until the Hands-Free system has no in use
Bluetooth connections.
Check that the Hands-Free system is selected (
show in the DISPLAY).
Follow the mobile phone manufactures instructions to search and
connect to a new bluetooth device. The phone will search for
discoverable Bluetooth devices in its range.
Select 'ASTON MARTIN' from the device list. The phone will prompt
for a passkey.
If 'ASTON MARTIN' does not show check that the Hands-Free
system is selected and search again.
9.8
Press MENU (on the vehicle) and move to <Phone menu...> (Enter)
<Bluetooth...> (Enter) <Connect from Mobile Phone> (Enter). The
DISPLAY will then show a passkey, enter the passkey into the mobile
phone.
The DISPLAY will show 'Phone Connecting...' then, if successful,
'Synchronizing'. Once synchronizing has completed the mobile
phone is ready for use.
symbol will
If the passkey is not entered after 20 seconds the screen will time-
out.
Synchronizing automatically places all the mobile phone
contacts onto the vehicle system (Refer to 'Phone Book', page 9.10).

Removing a Paired Phone

Using the Hands-Free system
Press MENU and navigate to <Phone menu...> (Enter)
<Bluetooth...> (Enter) <Remove Phone> (Enter).
A list of paired phones will show. Navigate to the required phone and
press ENTER to delete or BACK to cancel.