Automatic Operation; Manual Operation - Aston Martin DB 9 2010 Manual

Automatic Operation

Press AUTO. Using the TEMPERATURE dial set the required
in-vehicle temperature (read the actual temperature setting in the top
left of the DISPLAY). The A/C button LED will come ON.
Adjustments to fan speed, air flow and air recirculation will be made
automatically according to the set temperature, interior and exterior
conditions.
When using the air conditioner, mist may come out from the
vents. This is not a sign of trouble but a result of humid air being
suddenly cooled.
If resetting climate control functions other than the fan speed,
the fan speed will stay set as in automatic mode. Adjustments to the
fan speed will cancel Auto Mode.
If the engine is cold the A/C will not start up until the engine has
started to warm up.
Defrost and Demist
To defrost or demist the windshield on vehicle start up in
extreme cold weather conditions, run the engine at 1500 rpm
Always make sure that Neutral (manual) or Park (automatic) is
selected and the parking brake is applied.
Press MAX . The outside air intake is automatically selected, the
temperature is set to maximum and A/C is started.
To cancel Automatic defrost or demist either:
• Press MAX again
or
• Press AUTO
or
• Press any of the airflow mode buttons

Manual Operation

Heating and Cooling
Set the required:
• Fan speed
• Temperature
• Air flow
If dehumidifying is required, press the A/C button (button LED ON).
To cease dehumidifying press A/C button (button LED OFF).
When using the air conditioner, mist may come out from the
vents. This is not a sign of trouble but a result of humid air being
suddenly cooled.
Setting the temperature to maximum high or low will not provide
the required temperature at a faster rate. To prevent cool air blowing
from the vents when heating immediately after starting a cold engine,
the amount of airflow is reduced until the air warms up.
7.5