Cruise Control - Aston Martin DB 9 2007 Manual

Trip Meter
Shows distances travelled since last
reset of trip meters T1 and T2.
Toggle between T1 and T2 by
pressing (B) for less than 3 seconds.
Press (B) for more than 3 seconds to
reset the trip meter on display.
Display Units
With the ignition at position 'II'
press (C) and (D) together for
3 seconds to change the trip
computer display units.
4.18

Cruise Control

Cruise control can be used to maintain a selected vehicle
speed, above 22 m.p.h. (35 km/h), without having to use the
accelerator.
(A) RES - Resume the set
speed retained in
memory.
(B) SET '+' / '-' - Set the
speed or accelerate /
decelerate.
(C) On / Off - Switches
cruise control On / Off.
(D) CAN - Cancels cruise
control but retains the set
speed in memory.
Cruise Control On /Off
Use the 'On / Off' switch (C) to activate / deactivate cruise
control. Under certain conditions cruise control will
automatically switch off (Refer to 'Cruise Control Automatic
Switch Off', page 4.20). When cruise control is active
'Cruise' will show in the message display (left) (Refer to
'Instrument Cluster', page 4.3).