Selecting A Phone; Calls - Aston Martin DB 9 2010 Manual

Selecting a Phone

The phone to be selected must have Bluetooth ON, visible and
in close proximity to the Hands-Free phone system.
Using the Mobile Phone
If not ON or not selected, press PHONE.
Using the Mobile phone, follow the manufactures instructions to
search and connect to a Bluetooth device. The phone will search for
discoverable Bluetooth devices in its range. Select 'ASTON MARTIN'
from the device list. Select Connect.
If 'ASTON MARTIN' does not show check that the Hands-Free
system is selected and search again. If 'ASTON MARTIN' still does not
show the mobile phone may not be paired (Refer to 'Pairing
Additional Phones', page 9.7)
Using the Vehicle Hands-Free system
With the Hands-Free system already selected, press MENU and
navigate to <Phone Menu...> (Enter) <Bluetooth...> (Enter)
<Change Phone> (Enter). A list of paired phones will show (along
with Add phone). Navigate to the required phone and press ENTER
to change or BACK to cancel.
Or, if the Hands-Free system is not ON:
Press PHONE. The system will then scan for the last used mobile
phone. If found and it is the mobile required then press ENTER. If the
last phone is not found the DISPLAY will show a list of paired phones
within range (with Bluetooth ON). Navigate to a phone and press
ENTER to select that phone.

Calls

Making a Call
Check that the Hands-Free system is selected (
in the DISPLAY).
Press PHONE, or CALL on the steering wheel controls.
• Press the JOYSTICK (up or down), SCROLL button, or turn the
TUNING dial to select a contact from the phone book. Press CALL
or ENTER to call.
Or
• Dial the number using the keypad and press CALL or ENTER to
call. Press BACK to delete a number. Press and hold BACK to
delete the whole number.
Ending Calls
To end a call press CANCEL or BACK.
symbol shows
9.9