Avoid Specific Areas - Aston Martin DB 9 2010 Manual

Avoid Specific Areas

Specify an Area on the Map
<Settings> (Enter) <Route options> (Enter) <Avoid specified
areas>
Press the JOYSTICK right, move to <Selected> and press the
JOYSTICK right. Select <Map>.
Using the JOYSTICK, move the centre point of the hairline cross to
the centre of the area to be avoided. The name of the destination the
centre point rests on is shown at the bottom of the map.
The rectangle shows the size of the area. Press ENTER to obtain the
submenu.
Select option in the submenu and press ENTER.
10.24
<Scale> - Specify the size of the area to be avoided. Move to + or
- and press ENTER repeatedly to adjust the scale. Press BACK to
accept.
<Set area to avoid> - Saves specified area. Select <OK>.
<Adjust size> - Change the size of the area using the JOYSTICK.
Press BACK to undo the change, or press ENTER and select <Set area
to avoid> to save.
<Adjust area> - Move the area using the JOYSTICK. Press BACK to
undo the move, or press ENTER and select <Set area to avoid> to
save.
Specify an Area Address
<Settings> (Enter) <Route options> (Enter) <Avoid specified
areas>
Press the JOYSTICK right, move to <Selected> and press the
JOYSTICK right. Select <Address>.
Enter the address of the area to be avoided. The address then
constitutes the centre of the area.
Use the JOYSTICK to move between the rows and press ENTER to
enter the address. Once a valid area has been selected, move to
<Set>, press ENTER.
The specified area is shown on the map. Press ENTER to obtain the
submenu.