Advanced Mode Settings - Aston Martin DB 9 2010 Manual

Advanced Mode Settings

Route Options
<Settings> (Enter) <Route options> (Enter)
Use the JOYSTICK to move between the functions and select the
desired setting. Confirm settings by pressing ENTER.
<Route> - Select a <Fast>, <Short> or <Easy> when calculating
a route.
Easy - Avoiding complex intersections and difficult manoeuvres,
less narrow roads and junctions.
<Avoid highways> - Select if Highways are to be avoided when
calculating the route.
<Avoid toll roads> - Select if toll roads are to be avoided when
calculating the route.
<Avoid ferries> - Select if ferries are to be avoided when
calculating the route.
<Avoid car train> - Select if car trains are to be avoided when
calculating the route.
<Avoid time-restr. roads> - Select if the system should avoid time-
restricted roads when calculating the route. The correct time zone
must be set for the function to work (Refer to 'System Settings', page
10.14).
<Avoid specified areas> - Select the areas the system is to avoid
when calculating the route (Refer to 'Avoid Specific Areas', page
10.24).
<Reset to default> - Restore factory settings. Press the JOYSTICK
right. Select <OK> or <Cancel> and press ENTER.
The system can only use larger roads when calculating a route
extending over a long distance. If <No> is selected for toll roads and
Highways, they are avoided to the greatest possible extent and are
only used if there is no other reasonable alternative.
Map Options
<Settings> (Enter) <Map options> (Enter)
Use the JOYSTICK to move between the functions and select the
desired setting. Confirm settings by pressing ENTER.
<POI selection> - Press the JOYSTICK right to obtain the submenu.
<Show all> - All facility symbols on the map image are shown.
<Hide all> - No symbols are to show.
<Show selected> - Choose which symbols are to show.
10.13