Prnd Buttons - Aston Martin DB 9 2010 Manual

PRND Buttons

[1] PARK- Press and release to select Park once the vehicle is
stationary. The transmission will mechanically lock. If the vehicle key
is moved to position '0' or removed from the Ignition Control while
the vehicle is at a standstill, the transmission will automatically select
Park.
Always make sure that the parking brake is applied.
It is not possible to select Park above 1 mph (2 km/h).
[2] REVERSE- When stationary and with the footbrake applied, press
to select Reverse. When Reverse is selected, R will show red in the
Gear Position Indicator Display (GPID) (B) and an audible warning
will sound.
[3] NEUTRAL- When stationary and with the footbrake applied, press
to select Neutral.
[4] DRIVE- When stationary and with the footbrake applied, press to
select forward gears.
If the brake pedal is not pressed the message centre (right) will
show 'Press Brake Pedal' and an audible warning will sound.
The message centre (left) (A) shows the current gear selection (R, D1,
D2, etc.) while the Gear Position Indicator Display (GPID) (B) shows
D (Drive), R (Reverse) or P (Park) according to current gear selection.
While in Auto Drive mode the GIPD will show 'auto'.
If the vehicle speed is less than 2.5 mph (4 km/h), Reverse may
be selected from Drive, without pressing the brake pedal, to enable
a vehicle 'rocking' i.e. to enable vehicle movement out of mud, snow,
etc. If 2.5 mph (4 km/h) is exceeded then the transmission will
automatically select Neutral.
5.5