Aston Martin DB 9 2010 Manual page 187

Select City
Select <City> and press ENTER.
Use the JOYSTICK to spell out the desired City from the Character
table. Press ENTER for each letter.
A list of Cities matching that letter combination is shown at the
bottom of the SCREEN.
Press the JOYSTICK right when an arrow is shown on the right of
the line. A list of the five last entered Cities will show. Select the
required City, if available, from the list and press ENTER.
When there are no more alternatives, the system fills in the
missing letters itself.
A scroll bar on the right shows that there are several alternatives in the
list. The number shows how many.
Using the JOYSTICK move down and select directly from the list in
the menu. Select and press ENTER.
While scrolling through the list, return to the Character table by
pressing BACK. Press BACK to delete the entered letters one at a time.
States, Cities and Street names are deleted when the destinations
in 'Last 20' are deleted.
Select Street
Move to <Street> and press ENTER.
It is also possible to search for street addresses throughout the
State without specifying a particular City.
Street addresses are not stored in the system for some small
towns. The town centre, however, can always be specified as the
destination.
Once a Street has been selected it is then possible to move to <Start
Guide>, <Itinerary> (Refer to 'Itinerary', page 10.22) or
<Information> (Refer to 'Information', page 10.26).
When <Start guide> is selected, the system begins calculating the
route and distance to the destination (during this time, a yellow
symbol is shown at the top of the SCREEN).
If a detour is made from the planned route during the trip, the system
automatically calculates a new route (Refer to 'Route Options', page
10.13) and (Refer to 'Avoid Specific Areas', page 10.24).
If neither a street number or an intersecting street is specified the
system guides to the middle of the street chosen.
10.17